gate valve manual hydraulic dual drive

Model Number:1 13/16"～7 1/16"

Place of Origin:China

...Gate Valve, Manual Or Hydraulic Gate Valve 3-1/8" 4000psi API 6A Oil And Gas High Pressure Sulfur-Resistance Gate Valve, Manual Or Hydraulic Gate Valve Description The Mud Gate Valve, with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in today’s oilfield. The Valve standard trim includes 316SS Gates

Brand Name:KYKY

Model Number:CCD-200A

Place of Origin:China

Gate Valve , CCD series , Electric drive,CCD-200A ND200 , 10E5-10E-7 Pa New type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. Exteranl surface of valve adopts silver...

Model Number:Z45X/RVHX

Place of Origin:China

Brand Name:OEM

AWWA Z45X / RVHX copper resilient seated gate valves manual, pneumatic Drive Product Name: resilient seated gate valves Product Type: Z45X, RVHX Caliber: DN50 ~ DN600 Pressure: 0.6 ~ 6.4MPa Operating temperature: -196 ℃ -650 ℃ Material: cast iron, cast ...

Brand Name:HUIFENG

Place of Origin:CHINA

...Gate Valve API 6A Manual hydraulic dual drive Product Introduction The flat gate valve relies on the free fitting between the metal valve plate and the metal seat plane, and achieves sealing with the help of sealing grease and medium. Technical Parameters Driving Method Manual,hydraulic...

Brand Name:JC Wellhead

Model Number:FC hydraulic & manual gate valve

Place of Origin:China

...6A. The hydraulica gate valves are installed on wellhead christmas trees, casing heads, tubing heads, and wellhead choke & kill manifolds. The hydraulic and manual gate valve adopt the hydraulic pressure as the power source to operate the switch, when the

Place of Origin:Zhejiang, China

Brand Name:Hydrotu

Model Number:Electric Gate valve

Electric / Manual Flanged Gate Valve / Sluice Valve for DN 50 - 1600 mm / 0.25 - 6.4 Mpa Specifications: Gate valves is one of the most common open or close the valve, the use of the gate is up and down to work full open and full close to block fluid in ...

Brand Name:SND FOUNDRY

Model Number:Gate valve

Place of Origin:Zhejiang, China

...Gate Valve DN65 PN16 Material HT200 For piping systems Product Specifications Attribute Value Product Name Rising Stem Flange Gate Valve DN65 PN16 Material HT200 For Piping Systems Key Words Gate Valve Power Hydraulic, Solenoid, Pneumatic, Manual, Electric power+manual...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Hydraulic Gate Valve

Place of Origin:China

...Hydraulic Gate Valve For Well Flow Control Service Hydraulic gate valves are based on robust manual gate valves and suitable for oil & gas well testing,high pressure drilling and production operation accompanied with sour gas or/and sand.These hydraulic gate valves are fully designed,manufactured and tested in accordance with API Spec.6A. Features of Hydraulic Gate Valve * Linear double acting actuators of hydraulic gate valve

Brand Name:KOLINK

Place of Origin:CHINA

API 603 Stainless Steel Gate Valve Economic CF8 CF8M CF3 CF3M Flexible Wedge Bolted bonnet Outside screw and yoke Rising stem and non-rising handwheel Flexible wedge, fully guided Metal-to-metal seat Renewable seat ring and stem backseat Manual operation ...

Brand Name:Coosai

Model Number:DN50-DN600

Place of Origin:China

Manual Through Conduit Knife Gate Valve,Lug Type/Wafer Type Technical Data Sizes: DN 50 to DN 600 (larger diameters on request) Actuator : Hand wheel, Electric ,Pneumatic (single & double-acting), Chain wheel ,Hydraulic Standard flange connection: GB/T ...

Brand Name:CCSC

Model Number:FLS type

Place of Origin:China

PI 6A 2 1/16" 10000psi FLS Gate Valve for oilfield and wellhead Gate Valve 'FLS' type is widely recognized as a high-quality valve for severe applications. It is a fullbore, through-conduit valve available in pressure ratings from 2,000 to 20,000 psi and ...

Brand Name:Anty

Model Number:Z41H

Place of Origin:Wenzhou

...Valve Ductile Iron Flanged Gate Valve​ 1. Thicker and heavier 2. Better tightness 3. More Durable 4. Ease of use Technical parameters : Type Concealed stem flange gate valve Model Z41X-16Q/Z41X-150LB Material QT450 Connection Flanged Ductile Iron Pressure PN16 150LB Dimensions 2 inch-12inch DN50-DN300 Standards GB JB ANSI AISI JIS DIN GOST ( 77 Years of Technology Meets All Your Criteria ) Driving mode Manual...

Brand Name:Liang He

Model Number:Z41X

Place of Origin:Henan,China

...gate valve 1. Compact structure, reasonable design, good valve rigidity, smooth passage and small flow coefficient. 2. The sealing surface is made of stainless steel and hard alloy, with long service life. 3. Use flexible graphite packing, reliable sealing, light and flexible operation. 4. The driving mode is manual, pneumatic, electric, gear transmission. 5. The structure is elastic wedge single gate...

Brand Name:ATO

Place of Origin:CHINA

...Valve Manual or hydraulic 7 1/16" 15,000 psi Fracturing valve is a high pressure, large diameter rising stem parallel gate valve. It is mainly used for productivity testing , acidification ,fracturing and gas production after drill. It includes manual valve with ball screw labor-saving mechanism and hydraulic valve with hydraulic actuator that can be operated remotely by hydraulic...

Brand Name:ZS

Model Number:2000psi to 20000 pis

Place of Origin:China,Henan

Oil Gas Production Christmas Trees The purpose of these devices is to control the pressure at the wellhead and control the flow rate of oil and gas. There are different types of structural models available, including single-wing or dual-wing configurations...