grundfo pump mechanical carbon seal

Brand Name:JR

Model Number:JR GLF-14(G05-12MM 16MM)

Place of Origin:MADE IN CHINA

...Grundfos Pump Mechanical Seal Corrosion Resistant With Round And Square Stationary Mechanical shaft seals for pumps G05 Grundfos Seal SIC SIC FKM 12MM 16MM SIC/SIC/V or CAR/SIC/V Operational Conditions: Water Pumps G05- 12MM,16MM Mechanical Seals Temperature: -20ºC to +180ºC Pressure: ≤2.5MPa Speed: ≤15m/s Materials: Seal Rings: Resin Carbon, Antimony Carbon...

Brand Name:YUE MI

Model Number:GLF-C-16mm

Place of Origin:Guangzhou, China

...Grundfos Pump Mechanical Seal GLF-C-16mm 96511845 Application water pump model pairing table Technical Parameters Temperature -30℃~+200℃ pressure ≤1.2Mp a Speed ≤10m/s Medium Acid, alkali, below medium corrosive liquid Materials Rotary Ring SiC/VIT Stationary Ring Carbon/SiC/TC Spring SUS304/SUS316 Stationary Seat SUS304/SUS316 Secondary Seal Fkm Rotary Ring Holder SUS304/SUS316 China HQQE mechanical seal for submersible sewage pump

Brand Name:KALU

Model Number:KL-GLF2

Place of Origin:China

...: Pressure: ≤ 2.5 Mpa Temperature: -30℃~200℃ Speed: ≤ 25 m/s Size:12mm,16mm,22mm KALUSEAL supply replacement of Grundfos,Flygt,APV, , KSB, Hilge, Tsurumi, Ebara, Wakasha, Fristam, Hidrostal... pump seals What product we supply? We design and

Brand Name:None

Model Number:GLF-16-4R

Place of Origin:China

...Mechanical seal for Grund fo CR CRN Pump Mechanical shaft seal Seal Type GLF-16-4R Shaft size 12mm , 16mm,22mm Temperature -30 degree to 200 degree,dependent on the elastomer Pressure Up to 10 bar Speed Up to 15 m/s Face SIC,TC Seat Carbon ,Sic,TC Elastomer NBR,EPDM,VITON, Spring SS304 Metal parts SS304 industrial pump seals pump seal replacement centrifugal pump shaft seal pump shaft seal single cartridge mechanical seal...

Brand Name:JG

Model Number:A/B

Place of Origin:Zhejiang, China

...-8 , CR-16 3. Specification: double face seal, single spring 4. Certification: ISO9001, FDA Operating Limited: Shaft diameter 12&16mm Pressure up to 3Mpa Temperature -20~...

Place of Origin:Qingdao, China

...pump mechanical shaft seal Product Description Product name mechanical seal FBD Work temperature -40°C to 150°C Model WM GLF Sealing Face graphite,silicone carbide,tungsten carbide,aluminum oxide,stainless steel Secondary Seal Carbon/SiC/TC Rotary ring SIC/TC Liner speed ≤5m/s Pressure ≤0.3Mpa Feature Single and dual seal Short axial installation length Protection of the shaft along the whole length of the seal...

Brand Name:TAKUMI

Model Number:C12C10AMN

Place of Origin:China

... Pump Coolant F-12 Yarman Size Standard Fit for car parts/generator engine Car Make Customizable Place of Origin Hunan,...

Brand Name:CCO

Model Number:DC Oil Seal

Place of Origin:China

DC Customized Oil Seals Pump Mechanical Oil Seal NBR FKM Sealing For Auto Shaft Parts Product Description DC type: Outer rubber inner skeleton with springs on both sides. Resistant to about 0.03Mpa Material Performance ...

Brand Name:ASEEDER

Model Number:AN-087

Place of Origin:CHINA

Tungsten Carbide Seal Ring for Water Pump Mechanical Ring Seal Applications : We are manufacturing Cemented Tungsten Carbide Wear Parts for difference industry, tungsten carbide is widely used as seal faces with resistant-wearing, high fracture strength, ...

Brand Name:OUB

Model Number:EX60-5 EX100-2/3

Place of Origin:Guangdong, China

Product Name HYDRAULIC PUMP MAIN PUMP EX60-5 EX100-2/3 SEAL KIT Brand OUB Material NBR MOQ 10 Pcs/Accept trial order Sample Provided,Avaliable Usage Wheelloader Komatsu parts Feature Oil Resistance, Heat Resistance, Durable, Sealing Performance, ...

Brand Name:SHIZA

Model Number:4 / 3 D -

Place of Origin:CHINA

....This type is a metal lined slurry pump suitable for abrasive slag, sand, sludge and silt. Once the wet-end parts are worn out, they can be replaced by the same material, or changed to natural rubber or polyurethane. The ...

Brand Name:Bergman

Model Number:GLF-43mm

Place of Origin:Guangdong, China

...Mechanical seal size Origin Guangdong:China brand Bergman 43mm nature Manufacturer pressure ≤2.5mpa Line speed ≤10m/s temperature -30°C-200°CDepends on rubber Scope of use Grundfos pumps Face SIC Seats SIC rubber VITON EPDM Metal SS304 SS316 Certificate ISO9001-2015 scope Support OEM and customization Supply Capacity Over 2,000 square meters of spot warehouse Product Coverage Grundfos...

Place of Origin:Zhangjiagang,China

Brand Name:KALUSEAL

Model Number:KL-GLF1

STRUCTURE DESCRIPTION Replacement of Grundfos seal.Size :12mm 16mm 22mm and ect. Suit to GRINFOS pumps:CR1,3,5,10,15,20,32,45,64,90HLQE CRN1,3,10,15,20,32,45,64,90 HLQE shaft seal. Factory tour: We also supply repair service: Packing: Delivery: 1. If the ...

Brand Name:ZOZHI

Model Number:ZZ 301-12

Place of Origin:FUAN CHINA

Ceramic/Carbon Pump Mechanical Seal 301-12 For Water Pump Repair 1. 301-12 mechanical seal 2. Our seals can replace the original seals. 3.Application: seals are primarily used in Clean water, sewage water, oil, and other moderately corrosive fluids, etc 4....

Brand Name:LUCKYM

Model Number:Customized

Place of Origin:China

Pump Mechanical Seals, Shaft Seals Pump Parts,Ring Oil Seal Mechanical Seal Gasket Spare Parts: Standard Material l Rotary Faces: Carbon, Silicon Carbide, Tungsten Carbide l Seats: Alumina Ceramic, Silicon Carbide, Tungsten Carbide l Metal parts, Springs: AISI 316SS, 304SS l Bellows, Static seals...

Brand Name:HUATAO

Model Number:HT-Filter Press Feed Pump

Place of Origin:CHINA

...Pump Mechanical Seal Pump Filter Press Feed Pump Description: Filter press feed pump adopts an axial suction and radial discharge design structure, which has advantages such as strong suction lift, smooth feeding, novel structure, and leak free sealing. There are various sealing types to choose from, such as packing seal, containerized single end mechanical seal...

Brand Name:SUNCAR

Model Number:A4VG125 Main pump seal kit

Place of Origin:CN

... pump. About the fluid sealing, it usually uses the mechanical seal to contain the fluid within a vessel (typically pumps, mixers, etc.) where a rotating shaft passes through a stationary housing or occasionally, where the housing rotates around the shaft.

Brand Name:DONJOY

Model Number:KS - 20

Place of Origin:CHINA

... design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area. Description Options 1. Mechanical seal: SIC / SICE/EPDM, TC/TC,EPDM ( Double or Single Seal ) 2. Gasket: viton / NBR 3. Connection:

Brand Name:N&D

Model Number:Inlaid Carbide Seal-ring

Place of Origin:Guanghan

...Carbide 91HRA Water Pump Mechanical Seal Polishing WC+Co/Ni High Hardness Tungsten Carbide Seal Rings For Pump Customized Size Product Description Tungsten Carbide Seal Rings are used as Mechanical Seal faces in pumps, Compressors and Agitators. These are ...

Place of Origin:Jiangxi, China

Brand Name:ORK

Model Number:As per buyer's drawing

...circular cross section (from which the "O" in its name is derived). The purpose of using O-ring seals is to prevent leakage and loss of liquids or gases. They simplicity,convenience, and small installation space. As long as the groove design and