hammers over the anvil

Brand Name:Magcach

Model Number:JW-225

Place of Origin:China

...Anvil 1) Test anvil is the excellent instrument for assessing test hammer. 2) Test anvil is made from the best steel and especial tool steel. Contact area between anvil core and anvil body get excellently polished, and the rigidity of anvil core is HRC58~62 3) Test anvil must be located on horizontal ground, take test hammer operation on it and check the rebound value, qualified concrete test hammer...

Brand Name:SAMYON

Model Number:JW-225

Place of Origin:CN

...Anvil Used To Calibrate The Test Hammer JW-225 Test Anvil Used To Calibrate The Test Hammer Application: It is used to calibrate the test hammer. Parameters: Item Names Details 1 Steel core hardness 60+/-2HRC 2 Rebound value fall range 80+/-2 3 Rebound value fall range (Test hammer impact energy 0.735J and 0.196J) 74+/-2 4 Weight 16kg Features: 1. Test anvil must be located on horizontal ground, take test hammer

Brand Name:Btutest

Model Number:BTU-CA225 \BTU-CA3000 \BTU-CA1000

Place of Origin:Made in China

Anvil For Verification Concrete Testing Equipment Standard: EN 12504:2 ASTM D5873 ASTM C805 Description: Used for calibration of concrete test hammer (models HT series). Made of special alloy steel and supplied complete with traceable hardness certifi cate. It is essential for the periodical laboratory verifi cation of the Rock classifi cation hammer.Concrete Testing Equipment Specification: Type of calibraton anvil Type of concrete test hammer

Brand Name:TR

Model Number:TR-770

Place of Origin:CHINA

...TR-770 3/4" orl” 4800 1880 Twin hammer or pin less Hammer 3/8" 1.5〃 M28 90 PSI 5.75kg TR-736 1〃 4000 3000 Twin hammer 1/2” 6" or 8" M38 90 PSI 12.4kg Air Impact Wrench Application&Features 1) Made by alloy steels, heat treatment system extend the

Place of Origin:Beijing

Brand Name:HUATEC

Model Number:HTH-1000

... Average rebound value on steel anvil: 83±2 Stiffness of tension spring: 10N/cm Size: Φ65*486mm Weight: ≈3.5KG Brief introduction: Submit to JGJ/...

Brand Name:A&A

Place of Origin:CHINA

...: Metalworking Face Plate Width: 5IN, 5 1/4in Horn Length: 8 1/2in, 7 1/2in Place of Origin: China Name: Steel Anvil Blacksmith Anvil for sale Material: Steel Usage: Hammered and shaped metal Horn: Single Packing: Wood Case Sizes: 25/50/75/100/150/200 KG ...

Brand Name:ROSCHEN

Model Number:2"

Place of Origin:Germany

...Hammer Standard Penetration Test For Soil Detailed Product Description: SPT Auto Trip Hammer is produced complying with the Standard Penetration Test (SPT) to BS 1377: Part 9: 1990. The Automatic Trip Hammer is manufactured for complying with the Standard Penetration Test (SPT) to BS 1377: Part 9: 1990. SPT Drive Rods and a Split Tube Sampler are connected to base of the anvil...

Brand Name:Aoxing

Model Number:18", 24", 457mm, 610mm

Place of Origin:China

... Trip Hammer is designed for driving the split tube sampler or cone assembly required for the Standard Penetration Test (SPT) or Cone Penetration Test (CPT). The hammer consists of a weight of 63.5 kg complete with pick-up and self-tripping mechanism that

Brand Name:WadJay

Model Number:C41-25kg

Place of Origin:china

...hammer air hammer The main performance characteristics: 1. Powered by compressed air, meet the needs of production safety, and tapping force against frequency by adjusting the air pressure control, 2. The use of the body is made of cast iron, large tonnage air hammer and anvil...

Place of Origin:China

Brand Name:AA4C

1" Air Impact Wrench. Short Anvil. Vehicle tools. air tools. AA-T89004 air impact wrench tools vehicle tools Specification: Square drive:1" Bolt capacity:38mm Max torque:1200ft-lb/1600n-m Hammer machanism:Rocking Dog Air inlet:1/2" Air hose(I.D.):1/2" Avg....

Categories:Drilling Core Barrel

Country/Region:china

... Standard Penetration(SPT) to BS 1377:Part 9:1990. SPT Drive rod and Split tube sampler are connected to the base of the Anvil, and drive into the ground by the falling weight. The Automatic Trip Hammer comprises a weight of 63.5 kgs complete with pick-up

Brand Name:HUIXUAN

Model Number:Tube plate

Place of Origin:China

... from 0.5 kg up to 300 tonne shaft forgings. Mainly performed on gravity drop, double-acting and counterblow hammers. A forging hammer is a mechanical version of the blacksmith’s hammer and anvil. It consists of a heavy mass or tup, which is allowed to

Brand Name:BEST

Model Number:1/2''-48''

Place of Origin:China/Japan

It is used for the production of simple hand tools such as axes, hatchets, hammers and ordinary blacksmith, anvil, blacksmith tools support, files, knives, dies, markers, engraving tool, drag rings, punches punching knives, leather and paper. Technical ...

Brand Name:BRM

Model Number:LK-56651

Place of Origin:Fujian China

...hammer can keep high torque output and durable. 2) Made by maraging steels,lightweight but durable,design for heavy duty. 3) Direction and speed control in one knob 4) Easy-operating trigger 5) 1/2" air inlet with filter 6) Side exhaust 7) Can be use with 3',6" or 9" anvil. Product Parameters

Brand Name:NC110

Model Number:110

Place of Origin:China

... word"forged iron". Historically wrought iron has been worked by blacksmiths, using traditional techniques like hammers and anvils to make high end 'Decorative Wrought Ironwork. Description Material Iron, Steel Feature Easy to assemble, durable surface

Brand Name:DM

Model Number:DM-0055

Place of Origin:CHINA

... a hammer to deform a piece of metal, typically placed on a stationary anvil. Another approach is to use compression to press the metal between simple dies. These simple dies are typically flat, semi-round or V-shaped. Regardless of the ...