hot surface igniters

Brand Name:KRHX

Model Number:KR-ST

Place of Origin:China

... only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 watt. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is

Brand Name:Kingpo

Model Number:KP-FT3540

Place of Origin:China

...Hot Surface Ignition Temperature Tester Product Overview The A2L refrigerant hot surface ignition temperature tester determines the lowest temperature at which A2L refrigerant can be ignited by a high-temperature hot surface under specific conditions. This critical measurement, known as the hot surface auto-ignition temperature, is essential for evaluating fire risks when refrigerant leaks encounter hot surfaces...

Brand Name:ZG

Model Number:MS

Place of Origin:China

... High-Temperature Hot Surface Igniter Series Product Introduction The silicon nitride high-temperature thermal surface igniter is an advanced new type of igniter that utilizes the heat conduction of the heating element for ignition. The heating element...

Model Number:G3010

Brand Name:POSEIDON

Place of Origin:Guangzhou, China

Poseidon RO254 PO Packaging Hot Melt Adhesive - For Food & Coated Substrates, White Granule Good Coated Surface Adhesion About Poseidon RO254 Hot Melt Adhesive Hot melt adhesive RO254 appears as white granules and features stable melting performance. It...

Place of Origin:Hebei, China

Model Number:LD-GS-06

Brand Name:LaiDi

...safe, high traction steps. The formed channels trap dirt and let liquids drain away, keeping the walking surface secure. Specifications Product Name Galvanized Steel Grating Material Carbon Steel Surface Treatment Hot Dip Galvanized Bearing Bar Size 25x5mm

Model Number:HXT-730

Brand Name:HXT

Place of Origin:China

...Hot Air Conveyor Oven is a continuous thermal-processing system designed for PCB manufacturing, especially for drying, pre-curing and final curing of solder mask, solder resist, legend ink and other PCB coatings. The PCB panels are loaded onto racks and transported continuously through a controlled hot-air chamber. Forced hot-air circulation provides relatively uniform heating across the PCB surface...

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...Hot Wire Ignition Independent Exhaust Tester With Electrical Control Products Introduction The hot wire ignition tester is designed and manufactured according to the requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot...

Place of Origin:Guangdong, China

Brand Name:Yunding

...Hot Chamber Die Casting Machine for Precision Embossed Zinc Alloy Medal Production Purpose-built for manufacturing precision embossed zinc alloy medals for corporate awards, school honors and event commemorations, this 88-ton hot chamber die casting machine delivers accurate forming of raised relief designs, engraved text fields and medal border structures. Medals require crisp, sharp relief detail, perfectly flat back surfaces...

Brand Name:HeJin

Model Number:HWI-1

Place of Origin:China

...Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot...

Categories:Paper Gift Box

Country/Region:china

... hot-stamping and embossing techniques, it delivers a premium festive appearance. The surface accommodates multilingual holiday greetings, brand logos, and cultural motifs, perfectly suited for local celebrations including Hari Raya (...

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Model Number:Steel Grating

Brand Name:GNEE

Place of Origin:China

... bars at 4 in. (100 mm) on centre. Teeth are cut or pressed into the top edge of every bearing bar before welding, then the panel is hot-dip galvanized after fabrication. The serration provides slip-resistant walking surfaces for wet, oily and wash-down

Brand Name:SHC

Model Number:SC-HWI

Place of Origin:China

... resistance 5.28Ω/m Anneal holder distance 250mm Specimen holder distance and height 70mm,height:60mm (the distance between the holder surface to the tray surface) Wire wrapping tension and its distance 5.4N±0.05N, 6.35mm±0.

Model Number:SS18 ss brushed

Brand Name:brand new

Place of Origin:Wenzhou China

... 2pcs SS flexible hoses Surface finished ss brush /chrome/ matte black /gunmetal /brush gold Quality guarantee 3 years Cartridge 35mm ceramic cartridge,Working Life 500,000 times no leakage Feature For hot and cold water, water temperature: 0~90 degree

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview ...

Model Number:11137618512..

Brand Name:Boigevis

Place of Origin:China

Aluminum lower oil pan with carbon red surface finish developed for BMW N20 engine maintenance and replacement. High strength aluminum alloy as base material delivers superior structural rigidity and thermal conductivity, far more resistant to impact and ...

Brand Name:HAIDA

Model Number:6004-HD

Place of Origin:Guangdong, China (Mainland)

...) and duration (8–12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition or for

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition