hydrophilic pes membrane drip chamber filter

Brand Name:No

Model Number:XN-PES

Place of Origin:China

...Hydrophilic PES Membrane without supporting layer for Drip Chamber filtration stop liquid Automatically Pure polyethersulfone (PES) membranes without supporting layers are widely used in drip chamber filters. Compared to supported PES membranes, this pure PES membrane has the characteristic of being lighter and thinner.The PES membrane is located at the bottom of the drip stop filter, which can not only filter...

Place of Origin:Shandong, China

Brand Name:HUISIDUN

#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width:750px;height:750px;margin-top:0;margin-bottom:0;margin-left:0;margin-right:0}#detail_decorate_root .magic-2{margin-top:0;margin-left:0;width:750px;height:750px...

Brand Name:PULLNER

Model Number:PES

Place of Origin:Shanghai China

... layers. Its asymmetric membrane structure enables the filter to greatly extend the service life of the filter while ensuring the filtration efficiency, thereby effectively saving the filtration cost of the system. They are produced in clean room, 100%

Brand Name:LENGE

Model Number:PES

Place of Origin:China

...PES Pleated Filter Cartridge With 0.22um PES Membrane For Eye Drops is made by asymmetric gradient aperture membrane and PP components through advanced thermal bonding technology under Class 100 environment. The filter cartridge meets the technical requirements of GB/T34244-2017 of the People's Republic of China and without any adhesives or surfactants. Material of filter element components: Filter membrane: Hydrophilic PES membrane

Brand Name:Purescience

Model Number:SPS

Place of Origin:China

... designed to provide superior flow rates at an economical cost. The Unique construction features a high particle removal efficiency. Hydrophilic polyethersulfone membrane cartridges require no pre-wetting and are ready to use. Features and Benefits 100%

Brand Name:DAITTO

Model Number:Pleated Filter Cartridge

Place of Origin:China

.... It has excellent filtration performance and ability of completely intercepting bacteria. Features: ● The filter membrane is hydrophilic with absolute filtration accuracy; ● Low protein adsorption performance; ● Wide chemical compatibility; ●

Brand Name:FILTERK

Model Number:PES

Place of Origin:CHINA

... as the support layers, which are folded to form the filter core shell. The center rod and end cap are formed using hot-melt welding technology, and no adhesives are used. θ The entire ...

Brand Name:RIQI

Model Number:PA 66 1420

Place of Origin:China

...,1500mm,1600mm,1800mm,2000mm,2100mm,2000*1500mm, 2000*1800mm etc. All the size will be according to Filter press Filter press plate type chamber filter plate,recessed chamber filter plate,membrane filter plate,membrane and recessed plate mixed type and

Place of Origin:China

...ISO1135-4 standard. 2. Protective cap: Made of PP or PE. 3. Drip chamber: Made of soft PVC, size according to ISO1135-4 Standards. 4. Fluid filter: Cylinder support is made of ABS or PE, nylon net, Mesh size: 15 micron. 5. Air inlet: Cap is made of red,

Place of Origin:CHINA

...,ISO,TUV Materials Medical grade PVC,ABS,PE,PP Spike Plastic Spike OEM Available Species surgical infusion set Features: infusion set 1.Main accessories: Vented spike, Drip Chamber, Filter, flow regulator, latex tube, needle connector, and needle. 2

Brand Name:ascentet

Model Number:IV Tube

Place of Origin:China

... Drip Chamber,With or Without Medication Filter 5) Air Vent 6) Roller Regulater 7)Yellow Latex / Latex-free Tube Injection Bulb 8) Tubing-PVC,Transparent,Length-150cm or as Required 9) EO-Sterilized,Non-toxic,Pyrogen-free 10) PE/Blister Individual Package

Brand Name:AHJR

Model Number:BTS003

Place of Origin:China

... chamber with its top cap(the both/the single) 4. air inlet filter with the membrane of prevent water 5. regulator of blue(white) wheel or sheep's angle regulator 6. injection: natrue injection,straight injection,butterfly ...

Brand Name:ascentet

Model Number:IV Tube

Place of Origin:China

... OEM & ODM: Acceptble Caution: Single use Description: 1.The infusion set in consisited of infusion tube, spike, air vented, drip chamber, solution filter,

Brand Name:Easier Way Med

Model Number:Burette infusion set

Place of Origin:China

...drip chamber, tubing, flow regulator, fluid filter, air filter, injection site, 15.3x54MM drip chamber, 60drop/ml, hypodermic needle or intravenous needle and other accessories. List of main raw materials for burette-type infusion sets: Medical grade PP, PE, ABS ...

Brand Name:Bexin

Place of Origin:China

...,Disposable Application: Blood Transfusion Set Injection Specification 1. Drip Chamber:soft PVC, sizes according to the ISO 8536-4 standards. 2.Vented Spike: with or without air vented. 3. Fluid Filter: with or without fluid filter is alternative. 4.

Place of Origin:CHINA

Brand Name:care

Model Number:www.longstarmed.com

..., soft tube, bigger drip chamber with filter, PE regulator,ball injection site, luer lock, with cap 2. New &function type: Automatic exhaust and automatic liquid type, automatic liquid type, flow regulate type,precision filter type 3. Lightproof type 4. ...