iec 60065 mandrel test device

Brand Name:kingpo

Place of Origin:china

... clause design manufacture dedicated instrument. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall be placed closely to the surface of the

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:HongCe

Model Number:HX9804

Place of Origin:China

...following: Three test samples, each individual sample consisting of three or more layers of non-separable thin sheet material forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure 14) as shown in

Brand Name:Sinuo

Model Number:SN2204

Place of Origin:China

IEC 60065 150N±10N Rotation Angle Corrosion Resistant Metal Mandrel Tester Product Overview: This tester complies with IEC 60065: 2014 Clause 8.21, Figure 14-16, IEC 60558-1Fig6, IEC 60950 and other standards for tensile and electrical strength verification of indivisible thin layer materials. The tester has mechanical limits at 0 ° and 230 ° to ensure the accuracy of the test angle. Technical Parameters: Mandrel...

Brand Name:JLX

Model Number:LX-065K

Place of Origin:Made in China

...test probe: 1) Test Probe B of IEC 61032 2) Test Probe 13 of IEC 61032 3) IEC 60065:2005 Figure 3 - Example of ACCESSIBLE parts 4) IEC 60065:2005 Figure 4 - Test Hook 5) IEC 60065:2005 Figure 8 - Impact Test Using a Steel Ball Company introduction HK LEE HING INDUSTRY CO., LIMITED are specialized in manufacturing special, custom built, test and measuring equipment for products testing...

Brand Name:ALLIED TESTING

Model Number:TP

...test probe,IEC 60335 IEC 60065 Model TP11: rigid test probe,IEC 60335 IEC 60065 rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test...

Brand Name:HJ

Model Number:SH-12

Place of Origin:China

...Testing Machine Impact Test Using A Steel Ball With 0.5-15m Drop Height Standard: IEC 60598-1 ‘Luminaires – Part 1: General requirements and tests’ clause 4.13.4 a); IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ clause 4.2.5 Impact test; IEC 60065-1 ‘Audio, video and similar electronic apparatus – Safety requirements’ clause 12.1.4 Impact test Application: This device...

Place of Origin:Shenzhen China

Brand Name:CB/GS/SAA

Model Number:CB/GS/SAA

..., commercial catering equipment, etc. b) SANS IEC 60065 - Safety of audio-visual equipment and similar electronic apparatus, eg. TV’s, VCR’s, Hifi’s, radios, etc. c) SANS IEC 61029 - Safety of transportable motor-operated electrical tools, eg.

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Place of Origin:China

Brand Name:KeRang

...n layer material. Feature:The position of 10°and 230°are set with mechanical limit,not only to ensure the accuracy of the test angle, but also to achieve a simple operation method; weight with a hanging ring, in case of a point is damaged because of too

Brand Name:Pego Tester

Model Number:PG-MTD

Place of Origin:China

...Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC60950 annex A, IEC60065 and GB1921. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test device

Brand Name:Sinuo

Model Number:SNQC1008A

Place of Origin:China

...IEC 61851-1 Electric Vehicle Charging Interface Pendulum Impact Test Device Complied Standards & Clauses for Electric Vehicle Charging Interface Pendulum Impact Test Device This Electric Vehicle Charging Interface Pendulum Impact Test Device complied to EN IEC 61851-1-2019, IEC 61851-1-2017,12.11, IEC60068-2-75:1997 and IEC62262:2002. Technical Parameters for Electric Vehicle Charging Interface Pendulum Impact Test Device...

Brand Name:TONY

Model Number:HTE-006

Place of Origin:China

...Test Device with NM300-6, IEC60695-10-2, IEC 60884-1, IEC60320-1 standards Specificaitons: 1.0 Comply with the standards of NM300-6, IEC60695-10-2(2003), IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1.；GB4943,GB2099. 2.0 Ball diameter: 5mm±0.05mm(Radius 2.5mm) 3.0 Ball pressure: 20N(including loading device and ball) 4.0 Test...

Brand Name:SHC

Model Number:SC-TR

Place of Origin:China

.... It is applicable to the temperature rising of electronic accessories in working position. Technical parameters: Item TR-1 TR-2 TR-3 Working station 6 6 6 Testing current 0-40A 0

Brand Name:AI

Model Number:AIC42039-A

Place of Origin:China

...0 to -70ºC environment. The stretching device consists of motor, transmission parts, Specimen chuck, sensors and other components Standard: • GB/T 2951.14-2008 • IEC 60811-505 Technical parameters: • Electronic control cabinet: it consists of three

Brand Name:RISING

Model Number:RSBTT III

Place of Origin:China

... is controlled by the high-grade single chip microcomputer (SCM), with the digital display, the no load, short circuit and other test data synchronously also sampled by the SCM. It is avoid separately reading the voltmeter, ammeter and power meter in the

Place of Origin:ZHEJIANG,CHINA

Brand Name:SHENGDI TECHNOLOGY

Model Number:HS-6103

...Test Device Features The bench accords with the standard of “IEC 60736:1982 testing equipment for electrical energy meters”, “IEC 62053” The bench can test both Mechanical & Electronic single phase active energy meter and reactive energy meter (up to 0.2 class), it is also suitable for four quadrant energy meter testing. The bench can do warm up test, starting test, no load test(creep test...

Brand Name:BOTO

Model Number:B-LY

Place of Origin:China

... provide realistic simulation of electronic products and components during transportation and use may be subjected to a variety of environment such as water and spray test. In order to detect the waterproof performance of various products. Rain test box is

Brand Name:GOLD

Model Number:GD-IEC 61034

Place of Origin:China

IEC 61034 3 Meter Cube Wire And Cable Smoke Density Tester Smoke Transmittance Test Device Wire And Cable Smoke Density Tester Product Introduction: The 3m cubic wire and cable smoke density test box is developed according to the IEC 61034, BS 6853, GB/T17651.1~2 test standards, and is mainly used for smoke density performance testing of wires, cables and optical cables. During the test...