iec 60238 normal operation test apparatus

Brand Name:Sinuo

Model Number:SN9930

Place of Origin:China

IEC 60238 Figure 4 Normal Operation Test Apparatus For Screw-Type Lamp Holder Test Product information: Standard: IEC60238:2016Edition 9.1 (2017) figure 4. Sample and restrictions: Screw-type lamp holder. Test purpose: Used to determine the stability and mechanical properties of the lamp holder. Test principle: Mainly used for lamp holders that are used normally...

Place of Origin:China

Brand Name:KeRang

...Normal Operation Test Device HDJ0006 Standard: IEC 60238 Edison screw lampholders, clause 18 and figure 4 Application: This device is suitable for determination of stability and mechanical properties of the lamp holders. Test sample: Edison screw lampholders Feature: Mainly used for the normal...

Brand Name:HongCe

Model Number:SLT-4

Place of Origin:China

Apparatus For Making And Breaking Capacity Normal Operation Tests EN60669-1 Fig12 Products Introduction: The test machine is designed and manufactured according to EN 60669-1 Fig 12 and 18, IEC 60884-1 clauses 20 and 21 figure 16, and etc. It is applicable for the switches breaking capacity and normal operation life test of household and similar fixed electrical installations, also suitable for plugs and sockets’ breaking capacity and normal

Brand Name:kingpo

Model Number:IEC61058-1 / IEC60884-1

Place of Origin:china

...design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test. Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use,

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:SHC

Model Number:SC-DC27

Place of Origin:China

...Test Apparatus, IEC Test Equipment Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal

Brand Name:PEGO

Model Number:PG-LHNA

Place of Origin:China

...-2011 clause 18, it’s used to test the lamp holder when normal use shall cause no excessive wear or other harmful effect. The lamp holder’s insulation and protection against accidental contact shall not be serious affected. ...

Brand Name:HJ

Model Number:HJ0608A

Place of Origin:China

...Standard description: Appliances provided with a supply cord and that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it enters the appliance. NOTE 1 This does not apply to

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

...IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test...

Brand Name:KINGPO

Place of Origin:China

3KW Supply Cord Flexing Test Apparatus With One Working Station IEC60335-1 Clause 25.14 Supply Cord Flexing Test Apparatus With One Working Station Product information: This test apparatus checks the protection of the supply cord where it enters the ...

Brand Name:Sinuo

Model Number:SNQC1017

Place of Origin:China

...Test Apparatus EV Charging Interface Misalignment Tester Complied Standards & Clauses This test equipment conforms to UL2552-2022, clause 54C.3 and Figure 54C.2, IEC62196-1. Equipment Overview Samples and restrictions: Charging interface Application: Used to apply up, down, left, and right forces to the gripping point of the charging gun to simulate the offset operation it undergoes during normal...

Brand Name:JLX

Model Number:LX-Q02

Place of Origin:Made in China

Applicatiion: Ball-pressure Apparatus is used for testing parts of nonmetallic materials for resistance to heat. It is applicable to electrical equipment,lighting equipment, lowvoltage apparatus, Household electrical appliances, machine tool electrical ...

Place of Origin:Shenzhen China

Brand Name:CB/GS/SAA

Model Number:CB/GS/SAA

..., commercial catering equipment, etc. b) SANS IEC 60065 - Safety of audio-visual equipment and similar electronic apparatus, eg. TV’s, VCR’s, Hifi’s, radios, etc. c) SANS IEC 61029 - Safety of transportable motor-operated electrical tools, eg.

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

...IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine For Fire Safety And Regulatory Agencies In the field of electrical engineering and fire safety, the IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine is a crucial apparatus. It is designed to evaluate the ability of cables to maintain circuit integrity under the extreme conditions of a fire, thereby safeguarding the continuous operation...

Model Number:LR-K011

Place of Origin:China

Brand Name:Lonroy

IEC 60884 Voltage Power Load Tester (3station) 5 ~ 300V Test Breaking Capacity 1. Test Standard IEC 60884-1, GB2099.1, GB16915, GB15092, UL1054. 2. Use This load cabinet is designed for the electrical accessories' breaking capacity and normal operation, etc., and it can be used to simulate the electrical life and breaking capacity test...

Brand Name:LCS

Model Number:High Temperature Test

Place of Origin:CN

High-temperature testing is a reliability test conducted to simulate the high-temperature resistance of products during storage, assembly, and use. High-temperature testing is also the most commonly used accelerated life test. The purpose of high-...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-14AB

...test probe 14AB BND-14AB Technical Parameters: 1, Test Probe Length:80mm 2,Probe Diameter:1.0mm 3,Material:The handle is made of nylon, tip is made of hardened steel 4,Standard: IEC60884 ,IEC61032 Fig.10 1 Product Explanation The socket protection door test needle probe meets the standard requirements of IEC 60884&GB2099 , mainly used for checking the electronic shock safeguard and the normal operating...

Brand Name:iqualitrol

Model Number:QDT-1000

...Operation IP5X Enclosure Dust Blasting Dustproof Test Chamber Product Description: The Dustproof Test Chamber is according to IEC60529, IEC 60598, GB2423.37-89 (Test L:dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93 (protective casing grade of low-voltage apparatus...

Brand Name:LIB

Model Number:IEC 60529 45um Talcum Powder

Place of Origin:China

...to simulate a sandstorm climate environment and a dusty environment, the tested sample can operate normally in such an environment, and it is a qualified product. Parameter of Talcum Powder Model Number IEC 60529 45um Talcum Powder For IP Dust Chamber In