iec 60335 2 16 probe test rod

Brand Name:HJ

Model Number:HT-I31

Place of Origin:China

IEC 60335-2-16 Test Finger Probe Test Rod For Waste Food Processor Standard: IEC 60335-2-16 clause 22.102 ‘Household and similar electrical appliances -safety-Part 2-16:particular requirements for food waste disposers’. Application: It is used to test concealment of the reset button of a protective device. Test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I31

Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod

Brand Name:kingpo

Model Number:IEC & EN 60335-2-30

Place of Origin:china

EN 60335-2-30 60mm 60mm Test Rod: Probe diameter:60mm Probe length: 80mm Material: stainless steel Hollow with wall thickness of 5 – 10 mm IEC 60335-2-30 Clause 11 75mm Test Rod Probe diameter:75mm Probe length: 80mm Baffle plate diameter:95mm Baffle ...

Brand Name:Sinuo

Model Number:SN2210-4

Place of Origin:China

IEC 61851-1 Stainless Steel Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. Applicable standard This probe conforms to the standard requirement of IEC61032 figure 4 test probe D, it is required by IEC 61851-1 clause 8 and 12.4, IEC 60335...

Brand Name:KingPo

Place of Origin:China

...Test Rod For Testing Concealment Of The Reset Button IEC 60335-2-16 Clause 22.102 Test Rod For Testing Concealment Of The Reset Button Of A Protective Device. Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod...

Brand Name:JLX

Model Number:LX-8001

Place of Origin:Made in China

IEC60335-2-14 8mm Test Rod Technical parameters: Diameter of the probe: 8 mm Probe materials: Stainless steel Handle: Nylon 20.102 Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while ...

Brand Name:PEGO Electronics

Model Number:PG-TPR8

Place of Origin:China

Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of IEC60335-2-14 clause 20.102 and GB4706 clause 20.102, it is applied to check if ...