iec 60587 plastic testing equipment

Brand Name:DAXIAN

Model Number:DX8352

Place of Origin:China

... tracking indices of solid electrical insulating materials on pieces taken from parts of electrical and electronic equipment and on plaques of material using alternating voltages.In normal use, components made of insulating material may become moist and

Brand Name:YUYANG

Model Number:YY046

Place of Origin:China

...Test Chamber Plastic Test Equipment Application: Test the flammability of the plastic material spare part in appliances. Flammability, combustion speed, flame spread, the intensity of combustion can be acquired during test automatically and precisely. Standard: Horizontal flame test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210. 50W Vertical flame test:UL94, V0,V1,V2,IEC...

Brand Name:LIYI

Model Number:DW-1421

Place of Origin:CHINA

...Plastic Testing Equipment , Carbon Black Content Tester Uses: This machine is to determine the carbon black content of polyethylene, polypropylene, polybutylene plastic. Sample is heated up under the nitrogen atmosphere,carbon black is obtained by pyrolysis. Related standards: ISO 6964,GB/T2591.41, JTG E50 T1165,GB/T 13021, IEC...

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:HJ

Model Number:HK1503

Place of Origin:China

... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ...

Brand Name:Sinuo

Model Number:SN4418

Place of Origin:China

IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment Complied Standards & Clauses This IPX1~8 waterproof test system conforms to IEC 60529:2013, etc. Equipment Overview This test device is to verify Protection against Vertically Falling ...

Brand Name:HongCe

Model Number:HCVT01

Place of Origin:China

..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and

Brand Name:kingpo

Model Number:KP-MV12

Place of Origin:china

... is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by

Brand Name:Infinity Machine

Model Number:RS-8233

Place of Origin:Made in China

...Plastic Testing Equipment Heating Distortion Resistance Testing Application: Apply for plastic heating deformation resistance testing, put the testing sample on two supporting point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic...

Brand Name:vouch

Model Number:5600

Place of Origin:china

Automatic Plastic Testing Equipment Combustion Simulation Fire Hazard Test Lab Technology data: Accord with standard:IEC-60695,GB5169 Size:1120w*600d*1020h Flame height adjust:5-45mm Burning time adjust range:0-99....

Brand Name:KINSGEO

Model Number:KJ-3095

Place of Origin:CHINA

... characteristics of plastics materials is according to the American UL94 standard and GBT2408 a parts for <Equipment and instruments in plastic material flammability test of relative clauses specified >in the design and manufacturing, plastic parts of

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ...

Brand Name:PEGO Electronics

Model Number:PG-IPX16BS

Place of Origin:China

Chamber-Type IEC60529 waterproof IP Testing Equipment for IPX1/2, IPX3/4 and IPX5/6 Testing 1. Function of the Comprehensive Test Chamber The chamber equipment integated with drip box for IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 ...

Brand Name:SKYLINE

Model Number:SL-T18

Place of Origin:China

...Test Chamer 100kg Transportation Vibration Tester for package Test Application Universal Vibration Test Machine/Simulated Transport Vibration Tester is applied to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics, equipment, etc., under simulated transport conditions, according to American and EU transport standard (ASTM,IEC...

Place of Origin:China

Brand Name:CHENGFENG

ISO 871/ ASTM D1929 Test Equipment for Autoignition Temperature Flammability of Plastics Specification Temperature control accuracy ±2°C, adjustable between 150°C~450°C Display accuracy ±0.5°C Timer accuracy 0.1s Stainless steel container ...

Brand Name:Envsin

Model Number:ESC

Place of Origin:Guangdong

ISO Dust Chamber Testing equipment With Stability Test in blue and white color The Sand Dust Testing equipment is suitable for detecting the sealing performance of the product's shell,mainly to simulate the damage caused by the sandstorm weather to locks,...

Brand Name:LIB

Model Number:R9K-1200

Place of Origin:china

...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm)