iec 60598 light testing equipment

Brand Name:HongCe

Place of Origin:China

...Light Testing Equipment IEC 60598-2-13 ​ Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment...

Brand Name:KingPo

Place of Origin:China

... to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp which are gripped in

Brand Name:SHC

Model Number:SC-AT815

Place of Origin:China

... 60598-1 clause 8.15 Product information: This test apparatus is designed and manufactured according to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene,

Place of Origin:China

Brand Name:KeRang

Test Gauges for Lamp Caps and Holders HDJ0001 Standard: IEC 60598-1: Luminaires - Part 1:General requirements and tests; IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Application: These gauges are for the control of interchangeability and safety of lamp caps and holders. Test...

Brand Name:kingpo

Model Number:IEC60598-1-figure29

Place of Origin:china

... and made of 63 % Cu/37 % Zn. The chain shall have a resistance value of 2,5 Ω/m ± 20 % when stretched with a load of 200 g/m. NOTE The resistance value of the test chain should be checked before each measurement. Sample Certificate ( ISO17025 )

Brand Name:Lonroy

Place of Origin:China

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:HJ

Model Number:HK1503

Place of Origin:China

... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ...

Brand Name:Sinuo

Model Number:SN4418

Place of Origin:China

IPX1~8 Waterproof Test System IEC 60529 Waterproof Testing Equipment Complied Standards & Clauses This IPX1~8 waterproof test system conforms to IEC 60529:2013, etc. Equipment Overview This test device is to verify Protection against Vertically Falling ...

Brand Name:YUYANG

Model Number:YY613

Place of Origin:China

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC...

Brand Name:DAXIAN

Model Number:DX8332

Place of Origin:China

... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ...

Brand Name:PEGO Electronics

Model Number:PG-IPX16BS

Place of Origin:China

Chamber-Type IEC60529 waterproof IP Testing Equipment for IPX1/2, IPX3/4 and IPX5/6 Testing 1. Function of the Comprehensive Test Chamber The chamber equipment integated with drip box for IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 ...

Brand Name:SKYLINE

Model Number:SL-T18

Place of Origin:China

...Test Chamer 100kg Transportation Vibration Tester for package Test Application Universal Vibration Test Machine/Simulated Transport Vibration Tester is applied to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics, equipment, etc., under simulated transport conditions, according to American and EU transport standard (ASTM,IEC...

Brand Name:Envsin

Model Number:ESC

Place of Origin:Guangdong

ISO Dust Chamber Testing equipment With Stability Test in blue and white color The Sand Dust Testing equipment is suitable for detecting the sealing performance of the product's shell,mainly to simulate the damage caused by the sandstorm weather to locks,...

Brand Name:Infinity Machine

Model Number:RS-8310A

Place of Origin:Made in China

ASTM-D1148 Uv Light Testing Equipment White Plastic Discoloration Test Model: RS-8310A Purpose: This machine simulates the circumstances of sunshine radiation to test the resistance to discoloration of shoes materials. It’s appropriate for using in natural...

Brand Name:LCS

Model Number:LVD 2014/35/EU

Place of Origin:China

EU Portable Energy Storage Certification(LVD 2014/35/EU, EN IEC 62368) Some EU Portable Energy Storage Certification experimental methods: Overcharging of rechargeable battery pack. The battery pack is charged only to withstand any single fault condition...

Brand Name:LIB

Model Number:R9K-1200

Place of Origin:china

...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm)

Brand Name:BOTO

Model Number:B-ZW

Place of Origin:CHINA

... test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by