iec 60950 telecom test probe

Brand Name:kingpo

Place of Origin:china

Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom...

Place of Origin:China

Brand Name:Julixing

Model Number:LX-TD15

...Test Probe Telekom Sonde Purpose: Telecom-Test Probe meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share TNV circuits information technology to see if they provide sufficient protection. Contacts of terminals for TNV CIRCUITS which cannot be touched by the test probe...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

... ACCESS AREAS there is adequate protection against contact with bare parts of TNV - 1 , TNV - 2 and TNV - 3 CIRCUITS except that access is permitted to: Test Finger Probe – contacts of connectors which cannot be touched by the test probe (figure 3); –

Brand Name:Sinuo

Model Number:SN2210-23

Place of Origin:China

IEC 60065 Figure 2C Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection. There is a M6 thread on the end of the handle, through where the test probe...

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 60950 Flammability Test Equipment For Arcing Resistance Test IEC60950 Flammability Testing Equipment For Arcing Resistance Test Of Electric And Electronic Products Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application: It is suitable for arcing resistance test...

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:Lonroy

Place of Origin:China

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Place of Origin:China

Brand Name:KeRang

Mandrel Test Device HX9804 Standard:Confirm to IEC60950,IEC60065-1. Application:Insulation anti damage strength verification for non separable thin layer materials. Test sample:Non separable thin layer material. Feature:The position of 10°and 230°are set...

Brand Name:HJ

Model Number:HT-I09

Place of Origin:China

...Test Finger Probe Figure 9 Test Probe 13 With 15mm Length Metal Pin Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 9 test probe 13. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ figure 2B. Application: Other access probes...

Brand Name:Vertiv

Model Number:M831D

Place of Origin:CN

Vertiv brand M831D controller for Netsure 801 sereis rectifeirs cabinet M831D monitoring module Parameters : General Power Supply 19 VDC to 60 VDC Power Consumption, Maximum 18 W Temperature Range, Operating -40 °C to +70 °C (-40 °F to +158 °F) Relative ...

Brand Name:PEGO Electronics

Model Number:PG-TPBT

Place of Origin:China

Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ...

Brand Name:YUYANG

Model Number:YYC002

Place of Origin:CHINA

... safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to

Brand Name:SHC

Model Number:SC-VST

Place of Origin:China

...Testing Machine With Electronic Control Parameters: Test object Equipment enclosures Reference standard IEC 60950, IEC 60065, IEC 60598 Test Impact test - drop and swing Drop height 500-1500mm Impact steel ball 500g Release mode electronic control Swing impact available Power supply 220V 50Hz Description: This device is suitable for drop impact test...

Brand Name:YUYANG

Model Number:YYC002

Place of Origin:China

... ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain ...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Brand Name:ASLI

Model Number:AS-DB-200

Place of Origin:China

Ball Drop Impact Test IEC 60950-1 Impact Test Using A Steel Ball Testing Machine Over 20years factory in China Fast delivery 1 year warranty Professional technical support Drop Ball Impact Tester used to measure the impact resistance by the specified steel...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

...:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:BOGES

Model Number:BGS-MS156-137-SMA-L

Place of Origin:Dongguan, Guangdong, China

Test Application RF cable Assembly With SMA Male And Test Probe To Hirose MS156 Connector Detail Product Description Frequency: DC~3GHz S.W.R: 1.3 Max. Impedance:　50 ohm Cable: RF 1.37 Cable Connector: MS156 Connector, SMA Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test...

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT632

... years industry experience in research and development, Habotest standardized its management and quality systems, obtaining ISO9001-2008 and ISO/TS16949, CE, IEC safety standards and