iec 61032 jointed test finger

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC...

Model Number:TP18/19

... ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger...

Brand Name:kingpo

Place of Origin:china

... on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° tolerance.

Brand Name:JLX

Model Number:LX-1202

Place of Origin:Made in China

...Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules involved in the verification of accessibility to live parts. Technical Parameters: 1. Knurled Finger Diameter:12 mm 2. Knurled Finger...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. The standard test finger is intended to verify the basic protection against access to hazardous parts. It is

Brand Name:KingPo

Place of Origin:China

... standard. The IEC 60529 IP2X Jointed Test Finger Probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a finger. Conforms to: This is the “international”

Brand Name:szcx

Model Number:CX-T2B

Place of Origin:china

...Finger Diameter:12 mm Knurled Finger Length:80 mm Baffle Plate Diameter:50 mm Baffle Plate Length:100 mm Baffle thickness:20 mm Material:Stainless Steel. Handle:Nylon According to:IEC 61032, IEC 60335-1, IEC 60529-2001, IRAM 4220-1, SASO/IEC 60335-1, SASO IEC 60950, IEC...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

..., UL1278 figure 8 and EN60529 figure 2. The jointed test finger is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with finger. 2. Specification Jointed Test Finger: Diameter of

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for household and similar electrical appliances’ enclosure against electric shock test, an essential lab tool for

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe diameter (mm) Ф8.6±0.1 Finger

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:HAOMAI

Model Number:NSA-60

Place of Origin:China

.... It is widely used in the field debugging, system joint debugging, fault maintenance and other occasions. Handheld IEC 61850 Analyzer NSA-60 is portable network analyzer with a 10.1” touch screen so that engineer can take it only to different places in

Brand Name:HUATEC

Model Number:HEF-301

Place of Origin:Beijing

...er fingers because it has less joints. HEF-301 takes this advantage to realize one-finger operation. Moreover, with the latest digital electronic technology and microcomputer technology, this instrument can offer not only extremely convenient operation,

Brand Name:HUATEC

Model Number:HEF-301

Place of Origin:Beijing

... Testing Equipment , Precise Eddy Current Flaw Detector It has been proved by research that, operate smart keyboards with thumb is much easier than with other fingers because it has less joints. HEF-301 takes this advantage to realize one-finger operation...

Brand Name:HTI

Model Number:TW-257B

Place of Origin:Guangdong,China(Mainland)

... hazardous sharp edges, hazardous sharp points, hazard of crushing the fingers or other parts of the body. A load 25kg or 50kg is secured to the toy, and articulated arms with the elbow joints in a downward position are attached to the steering wheel or

Brand Name:Lamboss

Model Number:L1503A

Place of Origin:Guangdong, China

...Finger Bit Density Board Cnc Milling Cutter Carving Engraving Molding Remark: All size can be customized Application: 1.Professional Woodworking Applications 2.Edge Profiling 3.Joinery 4.Panel Raising 5.Fluting and Reeding 6.Mortising 7.Template Routing 8.Carving and Engraving 9.Dovetail and Box Joint Making FACTORY STRENGTH: Quality Control Measures: This involves stringent inspections, testing...