iec 61032 test probe 31

Brand Name:HJ

Model Number:HT-I14

Place of Origin:China

...: This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Test sample: Easily accessible enclosure live parts or mechanical parts. Test Finger Probe Feature:

Model Number:TP41

... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.

Brand Name:Sinuo

Model Number:SN2210-5

Place of Origin:China

IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe...

Place of Origin:China

Brand Name:Julixing

IEC 61032 Test Probe C & D, IP3X and IP4X, 2.5 mm Test Rod & 1.0 mm Test Wire Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP3X Test Probe C&D ( Test Probe C&D) is the necessary tool to proceed protecting electric shock test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I02

... figure 8.4. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger,base and insulated handle which

Brand Name:PEGO

Model Number:PG-TP31

Place of Origin:China

...protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Specification: diameter of probe 25mm Length of probe 80mm Diameter of front baffle 60mm Diameter of bottom baffle 110mm Total length of probe and

Brand Name:kingpo

Model Number:IEC61032-Fig2

Place of Origin:china

material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in ...

Brand Name:KingPo

Place of Origin:China

... confirms to the IEC61032 figure 17 and IEC60335 standard requirements. It is used for testing the protection of thermal radiation heaters which are fixed or portable visibly. Standard:IEC61032 figure 17 and IEC60335. Application:It is used for testing the

Brand Name:Lonroy

Place of Origin:China

... to meet the requirements of IEC60335-2-14 & GB4706.30 standards. They are used in protection tests to simulate fingers. The CX-125MM standard test finger and test bend finger are mainly used to test the mechanical protection functions of household and

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

...:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:kerang

Model Number:HT-I14

Place of Origin:CHINA

...test probe 31 figure 14. Application:It is used for checking food waste disposal units of milling system of hazardous mechanical parts whether is touched or not. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Euipped with threaded hole of M6 at the end of the handle(coordinate with pull and push dynamometer) Parameters: Model HT-I08 Name Long pin test probe...

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT632

... years industry experience in research and development, Habotest standardized its management and quality systems, obtaining ISO9001-2008 and ISO/TS16949, CE, IEC safety standards and

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:GENY

Model Number:YC-232/USB-IEC-TL

Place of Origin:China

...Probe Iec 62056 21 Optical Probe IEC 62056-21 Standard Optical Probe The Optical Probe is a specialized accessory designed for testing electricity meters that feature an optical interface. This precision instrument facilitates the non-contact reading of data, enhancing the efficiency and accuracy of meter testing...

Brand Name:Infinity Machine

Model Number:ID1200

Place of Origin:Made in China

... drop of the product by user in actual use on the product performance, which is applicable to the original-gesture drop test of mobile phone, tablet, e-reader, telephone, e-dictionary, and other consuming electronic products. Standard: IEC 60068-2-31,

Brand Name:YUYANG

Model Number:YY1139

Place of Origin:China

EN Toys Testing Equipment Probe C For Head Neck Entrapment ASTM Description: Probe C is used for testing for head and neck entrapment. Aplication: Activity toys with accessible completely bound openings with a lower edge of 600 mm or more above the ground...

Brand Name:PRECISION

Model Number:THC-800

Place of Origin:CHINA

Custom Thermal Shock Chambers Meets IEC 60068-2-14, Test Na2 Test Standards In the world of electronics and industrial manufacturing, the need for reliable and accurate testing of components is paramount. The Custom Thermal Shock Chambers, designed to meet...