iec 62196 1 vehicle terminal test equipment

Brand Name:Sinuo

Model Number:SNQC1012

Place of Origin:China

...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is

Brand Name:Sinuo

Model Number:SNQC1016

Place of Origin:China

...overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used to carry out pressure leakage test on the sealing requirements of the liquid coolants under 10L volume. The system's booster pump outputs high pressure to verify the

Brand Name:kingpo

Model Number:IEC 62196-1:2022 Figure 11

Place of Origin:china

IEC 62196-1:2022 Figure 11 Gauges for testing insertability of round unprepared conductors having the maximum specified cross-section Product Overview For Gauges For Testing Insertability Of Round Unprepared Conductors: The gauges conform to IEC 62196-1:...

Brand Name:PEGO GROUP

Model Number:IP56X

Place of Origin:China

IEC 62196-1 PLC Electric Vehicle IP5X and IP6X Sand Dust Testing Equipment 1. Introduction: The sand dust testing equipment is applied to test the physical and other related properties of electronic and electrical products, electric vehicle, lamps, ...

Brand Name:HongCe

Model Number:HT-PL1

Place of Origin:China

IEC 62196-1 Connection Set Of Conductive Charging For Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC 61851-1. Some charging can be achieved by direct connection from an electric vehicle