iec 62196 flexing test equipment

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:PEGO Group

Model Number:PG-ADC

Place of Origin:China

IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm 1. Introduction of apparatus for checking damage to VE conductors: The apparatus for checking damage to EV conductors is designed to meet the test requirements of IEC62196-1 clause 13.3 figure 12, IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause 6.9.7.3 (for flexion test...

Brand Name:I-suntop

Model Number:GFKR-1000

Place of Origin:China

...: This equipment is suitable for testing optical cable (such as elevator optical cable) withstand the ability of repeated flexing in operation, by applying repeated flexing force, for qualified optical cable requirements optical fiber does not break,

Brand Name:ZL

Model Number:ZL-1052

Place of Origin:CHINA

...Flexing Test Equipment with Standards IEC 227 IEC 245 UL 1581 VDE 0472 Overview: The Wire and Cable Flexing Testing Machine supports multiple test loads, meeting the dynamic flexing test requirements for soft wires and cables by manufacturers and inspection departments. Applicable Standards: Designed and manufactured in compliance with IEC 227-2, IEC 245-2, UL 1581, VDE 0472, IEC 60227-2(ed2)1997, IEC...

Brand Name:kingpo

Model Number:62198

Place of Origin:china

Product Description IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel Product Overview: The Test Plugs Are Required By IEC 62196-: 2022 Clause 14.1.5, 14.1.6, According To The Relevant Standard Sheets, Shall Have Finely ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-P302

... 2. Materials:shoes, rubbe The usage: Horizontal Type Low Temperature Flexing Testing Equipment is used to test if the materials such as leather, textile, rubber, shoes can endure the flexing at low temperature. Different fixtures can be installed in

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:HJ

Model Number:HK1503

Place of Origin:China

... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ...

Brand Name:HongCe

Model Number:HCVT01

Place of Origin:China

..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and

Brand Name:YUYANG

Model Number:YY613

Place of Origin:China

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC...

Brand Name:DAXIAN

Model Number:DX8332

Place of Origin:China

... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ...

Brand Name:SKYLINE

Model Number:SL-T18

Place of Origin:China

...Test Chamer 100kg Transportation Vibration Tester for package Test Application Universal Vibration Test Machine/Simulated Transport Vibration Tester is applied to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics, equipment, etc., under simulated transport conditions, according to American and EU transport standard (ASTM,IEC...

Brand Name:Envsin

Model Number:ESC

Place of Origin:Guangdong

ISO Dust Chamber Testing equipment With Stability Test in blue and white color The Sand Dust Testing equipment is suitable for detecting the sealing performance of the product's shell,mainly to simulate the damage caused by the sandstorm weather to locks,...

Brand Name:LIB

Model Number:R9K-1200

Place of Origin:china

...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm)

Brand Name:LABTONE

Model Number:HSKT25

Place of Origin:CHINA

IEC Standards Shock Test System With Payload 25kg, Max. Acceleration Up To 30000g Shock Test System Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging. To do a boundary assessment on ...

Brand Name:SHC

Model Number:SC-LTT

Place of Origin:China

IEC 60112 Lab Tracking LeakageTester Tracking Index Test Chamber Technical Parameters: Electrode Materials The electrode caput of brass-platinum Controller 7 inch TFT touch screen Electrode Distance 4.0mm±0.1mm,60±5°angle Test Voltage 100~600V adjustable, ...

Place of Origin:China

Brand Name:KeRang

Temperature Rise Tester TR-1 Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 – 2006 (Figure 44), VDE0620 etc. It is applicable to the temperature rising of ...