iec compliant plug test equipment

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:kingpo

Model Number:KP-8110P

Place of Origin:china

... sleeves of plug pins , IEC 60884-1 test equipment 1. Product information: To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40,This test apparatus consists of an insulating plate A

Brand Name:Sinuo

Model Number:SN1007

Place of Origin:China

IEC 61851 EVSE Connector Plug Cable Strain Relief Testing Equipment Complied Standards & Clauses IEC 61851-1 2017 Electric vehicle conductive charging system - Part 1: General requirements clause 11.6. IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11. IEC60309-1: 2012 clause 23.3, etc. Equipment Overview This cable strain relief test equipment is used to test the vehicle plugs...

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:HJ

Model Number:HK1503

Place of Origin:China

... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ...

Brand Name:HongCe

Model Number:HCVT01

Place of Origin:China

..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and

Brand Name:DAXIAN

Model Number:DX8463

Place of Origin:China

... strength of the conductor wire. The plug blade is fixed in the socket, and the tail end of the wire is connected to the hammer bar to test the pull. After that, weights were hoisted to perform swing tests and current tests. Comply with the standards: In

Brand Name:YUYANG

Model Number:YY613

Place of Origin:China

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC...

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ...

Brand Name:PEGO Electronics

Model Number:PG-IPX16BS

Place of Origin:China

Chamber-Type IEC60529 waterproof IP Testing Equipment for IPX1/2, IPX3/4 and IPX5/6 Testing 1. Function of the Comprehensive Test Chamber The chamber equipment integated with drip box for IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 ...

Brand Name:SKYLINE

Model Number:SL-T18

Place of Origin:China

...Test Chamer 100kg Transportation Vibration Tester for package Test Application Universal Vibration Test Machine/Simulated Transport Vibration Tester is applied to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics, equipment, etc., under simulated transport conditions, according to American and EU transport standard (ASTM,IEC...

Brand Name:Rohde & Schwarz

Model Number:R&S ESR-3 (ESR3)

The pre-owned R&S ESR3 unites a CISPR 16-1-1-compliant EMI receiver with a high-dynamic-range spectrum analyzer, providing full-standard emissions testing from 9 kHz to 3.6 GHz without external mixers. Integrated preselection, wide 10 Hz–10 MHz RBWs and ...

Brand Name:Envsin

Model Number:ESC

Place of Origin:Guangdong

ISO Dust Chamber Testing equipment With Stability Test in blue and white color The Sand Dust Testing equipment is suitable for detecting the sealing performance of the product's shell,mainly to simulate the damage caused by the sandstorm weather to locks,...

Brand Name:LIB

Model Number:R9K-1200

Place of Origin:china

...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm)

Brand Name:LABTONE

Model Number:HSKT25

Place of Origin:CHINA

IEC Standards Shock Test System With Payload 25kg, Max. Acceleration Up To 30000g Shock Test System Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging. To do a boundary assessment on ...

Brand Name:SHC

Model Number:SC-LTT

Place of Origin:China

IEC 60112 Lab Tracking LeakageTester Tracking Index Test Chamber Technical Parameters: Electrode Materials The electrode caput of brass-platinum Controller 7 inch TFT touch screen Electrode Distance 4.0mm±0.1mm,60±5°angle Test Voltage 100~600V adjustable, ...

Place of Origin:China

Brand Name:KeRang

Temperature Rise Tester TR-1 Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 – 2006 (Figure 44), VDE0620 etc. It is applicable to the temperature rising of ...

Brand Name:RISING

Model Number:RSBTT III

Place of Origin:China

Full Automatic Transformer Testing Equipment No-load and Load Loss Test Transformer Test Panel Test board Product Description A．Manual functions ■Manually save the records to the data base. ■The data communication can be done through the PC software and ...

Place of Origin:ZHEJIANG,CHINA

Brand Name:SHENGDI TECHNOLOGY

Model Number:HS6103

HS-6103 SINGLE PHASE ENERGY METER TEST BENCH This specification for single phase 1-loop energy meter test bench. Voltage Source: 1. Output Voltage Range: 0- 275/300V 2. Output Max Power: 800VA 3. Resolution: 0.01% 4. Stability: Better than 0.05% / 3 Min(...