iec60695 2 10 wire ignitability test

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

IEC60695-2-20 Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire...

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

Materials Glowing Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

...Ignitable Glow Wire Ignition Test Programmable Sus304stainless Steel Standard Gb5169 5114 glow wire tester machine Technology data: accord with standard:GB5169/IEC60695 SIZE:1120W*600D*1020H Glow wire: Φ4mm Ni/Cr(80/20) Thermocouple: Φ0.5mm K style Heating temperature: 50℃ ～1050 ℃ Sample test...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-...

Brand Name:YUYANG

Model Number:YY163

Place of Origin:China

...IEC60695-2-10 Glow Wire Tester 10mm/s～25mm/s Flammability Testing Machine Description: Glow wire tester refers to GB/T5169.10; GB/T5169.11; GB/T5169.12; GB/T5169.13 (IEC60695-2-10; IEC60695-2-11; IEC60695-2-12; IEC60695-2 -13) "Glow wire / hot wire basic test method, 5169.10 glow wire test device and general test method; 5169.11 finished product glow ignitability test method; 5169.12 material glow wire flammability test...

Brand Name:HJ

Model Number:HWI-1

Place of Origin:China

IEC60695-2-20 Flammability Testing Equipment Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire...

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

.... Application This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other

Brand Name:Sinuo

Model Number:SN772A

Place of Origin:China

...-2-10, IEC60695-2-11, IEC60695-2-12 IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT01

...Wire Tester, IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:KINGPO

Place of Origin:Mainland China

...-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test temperature( 550 ℃ ～ 960 ℃)

Place of Origin:China

Brand Name:KeRang

...Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test...

Brand Name:AI

Model Number:GWFI

Place of Origin:CHINA

...Wire Flammability Testing Apparatus Introduction: This Glow Wire Flammability Testing Apparatus is designed according to IEC60695-2-10: 2000 standard "glowing filament test method". It is applicable to electrical and electronic products, household appliances and materials fire hazard testing, simulate burning elements or overload resistance and the like heat or ignition source thermal stress caused by a short time. Glow Wire...

Brand Name:LIYI

Model Number:ZRS

Place of Origin:Dongguan

IEC60695 Electronic Glow Wire Test Equipment/ Plastic Testing Machine Basic introduction: 1. glow wire test apparatus Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. glow wire test apparatus Using electricity heating regulation material (Ni80 / Cr20) of resistanse wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min,then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or holde burning time ,also test

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

...Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests...

Brand Name:TONY

Model Number:HTE-007A

Place of Origin:China

...Wire Testing Chamber comply with IEC60695-2-10 -13:IEC 60335-1,IEC 60598-1 and IEC60745 Features: 1.0 They system comply with standards of IEC60695-2-10 :2013 ～ IEC60695-2-13 :2013,IEC 60335-1,IEC 60598-1 and IEC60745. 2.0 Glow wire material: Ni/Cr wire with 4 mm diameter 3.0 Temperature range: 50 ℃ ～ 960 ℃ 4.0 Current range: 0-200 Ampere 5.0 Input power: 220V/50Hz 6.0 Including thermocouple and 1℃ resolution display to monitor the wire

Brand Name:SKYLINE

Model Number:SL-7608

Place of Origin:China

Glow-wire Flammability Testing Equipment IEC60695-2-10~13 GB/T5169 Standards According to IEC60695-2-10~13,UL746A, IEC829, DIN695, VDE0471etc. Features 1.The flaming chamber and control part of the integrated design, convenient installation and operation...

Brand Name:GOLD

Model Number:GD-IEC 60695-2-10

Place of Origin:CHINA

...technical specifications of the "glow wire test method" in IEC60695-2-10, GB/T5169.10, GB/T5169.13 and GB4706.1 standards. It is specially used to evaluate the fire resistance of electrical and electronic equipment, household appliances and their

Place of Origin:China

Brand Name:CHENGFENG

...wire testing machine Technical parameters: 1. Hot wire temperature: 500 ~ 1000℃ adjustable 2. Temperature tolerance: 500 ~ 750℃ ±10℃, > 750 ~ 1000℃ ±15℃ 3. Temperature measuring instrument accuracy ±0.5 4. Scorching time: 0-99 minutes and 99 seconds adjustable (generally selected as 30s) 5. Ignition...

Brand Name:AISRY

Model Number:ASR-5660

Place of Origin:China

...Wire Test Apparatus For Material Burning Testing Machine Product Introduction: Glow wire tester is used for electrician, its components, parts, solid electrical insulation materials or other solid combustible materials, in line with GB/T5169.10~13, IEC60695-2-1/0~2-1/3, GB2099 , VDE 0620, GB4706, UL817 test standards. Test method: Heat to the specified temperature with a standard resistance wire ring, and then make the glow wire

Brand Name:WEILI

Model Number:90919-21562

Place of Origin:Guangdong, China

...Wire Ignition Cable 90919-21562 for Toyota Mark II Cresta Chaser Quick Details Model: COROLLA Wagon (_E10_) Year: 1992-1997 Car Fitment: Toyota Size: 13*10*4 Voltage: 12V Engine: 1.6, 1.8, 1.6, 1.5 (EL54_) OE NO.: 90919-21562 Product Description Brand Name WEILI Item Name Ignition Wire Set Moq 1 Box OR 2 PCS Guarantee 12 MONTHS Trail Order YES Price usd Place of Origin Guangzhou Delivery Time 3-15 DAY Guarantee 1,We will test