iec60884 1 torque test device

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

IEC60884-1 0-250mm Balance Arm Test weight 2.5N Plug Socket Tester Torque Test Device Standard with Plug Socket Tester: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 14.23.2 Standard description with Plug Socket Tester: The torque test device...

Brand Name:SKYLINE

Place of Origin:China

...meets the requirements of IEC60598-1, Chapter 4.14.6, Figure 11 of GB8898-2011, Figure 11 of IEC60065, IEC60335, IEC60884 and other standards. It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the

Brand Name:Sinuo

Model Number:SN2120A

Place of Origin:China

IEC60884-1 Flexible Cable Cord Anchorages Torque Test Apparatus System overview Complies with IEC 60884-1:2006 clause 23.2 and table 18, VDE0620 clause 23.2 and table18, etc . It is used to check wear resistance of plug, mobile socket mobile sockets, fixed...

Brand Name:PEGO

Model Number:PG-TQD

Place of Origin:China

...14.1 (test B), the test device is applied to assess whether the mechanical suspended device of rigid suspension luminaire has sufficient safety factor under the effect of constant torque force. The torque time and torque angle can be display at real time,

Brand Name:Sinuo

Model Number:SNQC1007

Place of Origin:China

...Torque Test Device for Vehicle Plug and Socket Complied Standards & Clauses Conforms to UL2594 clause 55.4, IEC62196-1:2014 clause 25.3 and figure 17 and table 11, IEC60309-1:2012 clause 23.3, etc. Product Overview It is used to test the ability of charging vehicle plug and socket, and connection cable accessories to withstand specified pulling force and torque...

Brand Name:kingpo

Model Number:KP-OT62

Place of Origin:china

... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.

Place of Origin:China

Brand Name:KeRang

Flexible Cable Torque Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord ...

Brand Name:SHC

Model Number:SC-FS05

Place of Origin:China

...ch is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the

Brand Name:HJ

Model Number:HC-IPX8-50A-100L

Place of Origin:China

...Application: It is used for the testing of IPX8. Under the device with shell protection grade (IP code) based mainly for electronic and electrical products, outdoor lighting, electric cabinet, communication ...

Brand Name:BAXIT

Model Number:GLO-101

Place of Origin:CHINA

...designed to test the opening and closing torque of various caps. It is mainly used to test the opening and closing torque and correction tightening force of various caps, lamp holders, etc., and the torsional destructive test of parts. The instrument has a

Brand Name:KINGPO

Place of Origin:China

... Water Spray Test Device With Φ6.3mm and Φ12.5mm Spray nozzle Standard: IEC60529 degree of protection provided by enclosures (IP Code) of the IPX5 and IPX6, IEC60884-1, IEC60335-1, IEC60598-1. Application: It is used for the testing of IPX5 and IPX6. ...

Brand Name:DAXIAN

Model Number:DX8431

Place of Origin:China

...Torque Testing Machine Product Description: This instrument is based on the GB2099.1, GB4706 and IEC60320 standards, used to test the tensile and torsion tests of various types of electrical power cords, and to assess whether the power cord clamping device is firm. Instrument parameters: 1) Station: 1 2) Pull value: 30N, 60N, 100N 3) Torque value: 0.1, 0.25, 0.35N.m 4) Rally time: 1S 5) Torque

Brand Name:Lonroy

Place of Origin:China

Model Number:0.7J

0.7J spring impact hammer test device IEC60068 Standard: IEC60068-2-75 IEC60884 UL1244 Technical parameters: Length:211mm Weight:1250g OD : 50mm Hammer Weight :60g Hammer Radius:10mm The ...

Brand Name:ZYD

Model Number:ZYD-T06

Place of Origin:CHINA

...Torque Testing Machinee Equipment function: 1.Pneumatic clamp fast install products,lifting device can put down and rise products from sink. 2.Servo motor drive valve open and close,Closed torque can be set up. 3.Testing time can be set up,change time setting ,need enter the password 4. Test process can be run automatically ,clamp rise automatic after testing...

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

Product Specifications: For measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of ...

Brand Name:YUYANG

Model Number:YY1144

Place of Origin:China

...Torque Gauge Torque Clamp For Toys Components Test ISO 8124-1 Description: To determine whether components of toys can be removed by a certain torque force. A torque-measuring device is used in conjunction with a torque clamp to record the applied force. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the torque test...

Brand Name:HAIDA

Model Number:8035-HD

Place of Origin:Guangdong, China (Mainland)

...device specially designed to evaluate and test the performance of Luer fittings with a variety of test functions including but not limited to leakage test, connection strength test, tightening torque test, etc. which plays a vital role in the research and development and manufacturing of medical devices. Test...

Brand Name:Seelong

Model Number:SSCH200-4000/12000

Place of Origin:China

Product description The host of the AC dynamometer adopts a dedicated AC asynchronous variable frequency motor, and the AC dynamometer is equipped with a torque measurement device and a speed measurement device for torque and speed measurement. The AC ...

Brand Name:Ai Si Li

Model Number:AS - PB - 6

Place of Origin:CHINA

...Test Equipment Plug Bend Testing Equipment Application: Automatic Cable Wire Lab Test Equipment Plug Bending Tester is applied for bending endurance test for wire connected with plug. This device is designed and manufactured to meet the requirements of UL817, IEC60884, GB2099. Features: 1. Operated by buttons. 2. When test...

Brand Name:NANBEI

Model Number:ANJ- 30

Place of Origin:China

... and torque screwdriver. It is mainly used to detect various kinds of torque wrenches, digital torque wrenches, preset torque wrenches, torque screwdrivers, screwdrivers and so on. Of the instruments and products. Widely used in electrical manufacturing,