iec62196 1 electric vehicle connector test equipment

Brand Name:Sinuo

Model Number:SN1107

Place of Origin:China

..., connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc. Equipment Principle and Structure: Pull is realized by

Brand Name:Sinuo

Model Number:SN1007

Place of Origin:China

... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Pull is realized by single-phase speed-regulating motor to

Brand Name:PEGO GROUP

Model Number:PG-TPB

Place of Origin:China

...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to

Brand Name:kingpo

Model Number:KP-8825

Place of Origin:china

IEC 62196-1 Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment Standard For Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment: IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–...

Brand Name:HongCe

Model Number:HT-PL1

Place of Origin:China

...Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC 61851-1. Some charging can be achieved by direct connection from an electric vehicle

Brand Name:JWY

Model Number:WR-XXXXXXXX

Place of Origin:China

#6/#8/#10 Stud Terminal & 187 Receptacle​ Red Custom Wiring Harness 18AWG Wire Specification: Products Name Wiring Harness Application Equipment/Machine Internal Connector 1 Spade Terminal Connector 2 Female 187 Receptacle Cable UL 1007 18AWG Cable ...

Brand Name:PEAKMETER

Model Number:PM701

Place of Origin:China

...testing AC charging station Features of Top Current Simulation Evse Tester with IP54,GFCI and CP pre testing AC charging station The adapter is capable of conducting electrical safety and functiontests on mode 3 electric vehicle charging equipment (EVSE) with a type2 connector . PE Pre-Test...

Place of Origin:China

Brand Name:Lonroy

...Test Bench Automotive Wire Harness Load Integrated Testing Station Product Description Scope of Application Complies with ISO 8092.1 - 4 series standards and QC/T 417.1 - 417.5 - 2001 standards for vehicle electrical wiring harness connectors, etc. Testing Function 1. 8-wire voltage drop detection, equipped...

Brand Name:BOGES

Model Number:Boges-SMAM-141-OPN-L

Place of Origin:Dongguan, Guangdong, China

...: SMA Connector Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test and measurement Specification A. Electrical Characteristics Frequency DC~3GHz Impedance 50 ohm S.W.R 1.5MAX @ 0~3GHz Return Loss >

Brand Name:RuiQ

Model Number:M8

Place of Origin:Tianjin, China

Product Description: Our EVSE Charging Station is designed to provide a convenient and safe recharging solution for electric vehicles. This charging station is equipped with IEC62196-2 Type2 connector and supports an input voltage of AC 240V. With a ...