ignition test chamber

Brand Name:AI

Model Number:AIC-695220

Place of Origin:China

... wire ignition test chamber is designed according to IEC 60695-2-20 and GB 4943 standards and conforms to the standard hot wire ignition test method. This hot wire ignition test chamber is mainly used for testing the hot wire ignition hazard of electronic...

Brand Name:Sinuo

Model Number:SNM05

Place of Origin:China

... and restrictions: Medical device boards or devices in oxygen-rich environments 3. Application: It is used for spark ignition test of medical device boards or devices in oxygen-rich environment, and is used to evaluate the fire risk of its equipment under

Brand Name:DGBELL

Model Number:BE-8105

Place of Origin:China

...Ignition Burn in Test Chambe Flammability Testing Equipment for Battery Tester Application DGBELL’s battery projectile / burning test chamber is suitable for testing the flame resistance and flammability of various consumer batteries, such as mobile phones and notebook computers. Easy to operate, safe and reliable, it is an ideal battery burning test equipment. Related Standard Test...

Brand Name:HOOHA

Model Number:ZY6204

Place of Origin:China

Short Circuit Ignition Test Flammability Test Chamber Teaching Demonstration Laboratory Scope of application: Suitable for experimental teaching and monitoring of electric fire simulation; Through experimental teaching and the actual verification, can ...

Place of Origin:China

Brand Name:GC

Model Number:GC-UL-C

...evaluate the flammability of materials used in electrical and electronic devices. It is designed to simulate the conditions of a small flame ignition source that may occur in these devices. The machine consists of a combustion chamber with a burner at the

Brand Name:ZL

Model Number:ZL-6016

Place of Origin:China

... losses every year, mainly corrosion, discoloration, deformation, strength loss, expansion, melting, etc. Especially when electrical appliances are easily ignited by rain. Therefore, the dimensional test of some products and materials is very important.

Brand Name:DAXIAN

Model Number:DX8379A

Place of Origin:China

... flame ignition source. After the flame is removed, it is measured by holding the open flame and burning and burning time, and after the flame is removed for 60 seconds, the sample is ...

Brand Name:Infinity Machine

Model Number:IE10 Series

Place of Origin:Made In China

... And Humidity Test Chamber The Environmental Test Chamber is an essential tool for testing the effects of temperature and humidity on products. This specific chamber, the Programmable Constant Temperature And Humidity Test Chamber, is designed to

Brand Name:YUYANG

Model Number:YY164

Place of Origin:China

....15; GB/T5169.16; GB/T5169.17 (IEC60950-11-10), UL 94 and other standards. The horizontal and vertical testing machine uses a Bunsen burner of a specified size and a specific gas source (methane or natural gas) to ignite a number of samples in a

Brand Name:HAIDA

Model Number:HD-H209

Place of Origin:Guangdong, China (Mainland)

..., place a wire mesh on the round hole, place the battery on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the

Brand Name:Haida

Model Number:HD-H209

Place of Origin:China

..., place a wire mesh on the round hole, place the battery on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

...test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:Envsin

Model Number:ETQ

Place of Origin:China

...Test Chamber Component Testing Chambers Product Lifecycle Testing Chambers Low pressure test chamber designed to simulate harsh environmental conditions by testing the combined effects of extreme temperatures, humidity, and low atmospheric pressure on products, materials, and components. This chamber...

Brand Name:BOTO

Model Number:BT-UV-ZW

Place of Origin:CHINA

... Ozone Aging Test Chamber Salt Spray Test Chambers IP Enclosure Proof Test Chambers High-low temperature test chamber Rapid-Rate Thermal Cycle Chamber (Rapid temperature test chamber ) Walk-In Temp Humidity Chamber (constant temperature wet laboratory )

Brand Name:HongCe

Model Number:VF-3

Place of Origin:China

...Test Chamber 1000W Standard: IEC60332-1-1:2004,IEC60332-1-2:2004,IEC60332-1-3:2004,IEC 60332-2-2 and etc. Application:Suitable for vertical burning test of single cable or optical cable products, determine the combustion characteristics of insulating materials. Test sample:Single cable or optical cable products. Feature:Using integral intake automatic ignition...

Brand Name:LIB

Model Number:T-100

Place of Origin:China

...Test Chamber,environmental chambers for Battery Testing are designed and manufactured to meet various types of battery testing requirements of its customers by keeping all safety options in mind against any harmful explosions or ignitions and user safety while testing...

Brand Name:LIYI

Model Number:LY-609-60

Place of Origin:China

...Test Chamber Custom corrosion test chamber Product Introduction: Quick Detail Test chamber capacity (L) 108L Spray Quantity 1.0~2.0ml/80cm2/h Test chamber size L×W×D(cm) 60*45*40 Max volume of test liquid (L) 15 Volume L×W×D(cm) 107*60*118 Power AC 220V, 10A Ph 6.5~7.2, 3.0~3.2 2.2 Brief Introduction 108 L Salt spray testing...

Brand Name:Gaoxin

Model Number:GX-8348

Place of Origin:Guangdong

... to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials. Such as

Brand Name:Sinuo

Model Number:SN881-960L

Place of Origin:China

...Test Chamber Environmental Test Chamber Laboratory Test Chamber 960L Complied Standards & Clauses It conforms to standards: IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests

Model Number:LR-B001

Place of Origin:China

Brand Name:Lonroy

...Chamber Environment Test Chamber GB11158 High Temperature Test Chamber Technical Condition GB10589-89 Low Temperature Test Chamber Technical Condition GB10592-89 High-low Temperature Test Chamber Technical Condition GB/T10586-89 Damp Heat Test Chamber Technical Condition GB/T2423.1-2001 Low Temperature Test Chamber Test Methods GB/T2423.2-2001 High Temperature Test Chamber Test...