indoor optical fiber cable iec 60794 1

Brand Name:FHDT

Model Number:Indoor multi-fiber optical cables

Place of Origin:Chengdu, China

Bow-type drop cables for telecommunication Product Description Cable diameter small, lighter, bending performance is good, easy to stripping, low construction cost. By cold meet technology, speed, flexibility and quick. Field wiring can separate wear tube...

Brand Name:Zion communication OR OEM

Model Number:Micro air-blown fiber unit

Place of Origin:CHINA

Micro Air-Blown Fiber Unit (MABFU) Air Blown Fiber Optic Cable Micro Air-Blown Fiber Unit (MABFU) Introduction: The Micro Air-Blown Fiber Unit (MABFU) is an integral part of air-blown fiber cable systems, widely used for indoor optical fiber cabling, ...

Place of Origin:China

Brand Name:KINGTONE OEM

Model Number:KT3009 GYXTC8S Fiber Optic Cable

...Optic Fiber Cable 13.5 mm with IEC 60794-1 Standard Quick Detail: GYXTC8S Fiber Optic Cable G.652D or G.657A Cable Diameter 2~12 core: 8.5*13.5 mm Tensile Strength Long/Short Term: 600/1500N Crush Resistance Long/Short Term:300/1000 N/100m Bending Radius Static/Dynamic: 10D/20D GYXTC8S cable complies with Standard YD/T 1155-2001 as well as IEC 60794-1. Description: The fibers...

Brand Name:DYS/OEM

Model Number:E2000/APC-LC/Upc

Place of Origin:Guangdong, China (Mainland)

Sc/APC-Sc/APC 4core Pre-Terminated Optical Fiber Patch Cable with Pulling Eyes Breakout Patch cables are installation cables that are suitable for laying in buildings, primarily in cable conduits and cable trays. Can be used as a building backbone or ...

Brand Name:Aixton

Model Number:AXT-ADSS-12-SPE

Place of Origin:CHINA

Optical Cable ADSS 12 Core Fiber Optic Cable ADSS All Dielectric Aerial Cable ADSS cable adopts the twisted structure of loose sleeve layer, 250 μm optical fiber is inserted into the loose tube made of high modulus materials, and the loose tube is filled...

Brand Name:HICORPWELL

Model Number:All The Essential Tools For Fiber Optic Construction Kits Fiber Tester Tools

Place of Origin:China

All The Essential Tools For Fiber Optic Construction Kits Fiber Tester Tools Fiber Optic Construction Tool Kits This integrated tool kit applies for fiber optic cabling, telecom system maintenance, cable cut-connect operation. It gathers many kinds of hand...

Brand Name:I-suntop

Model Number:GFK-90

Place of Origin:China

... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and

Brand Name:DAMU

Model Number:DM-ODB-32

Place of Origin:China

Indoor Outdoor Waterproof ABS FTTH BOX Fiber Access Terminal Optical fiber cable distribution box Product Description Application *Certification: ISO 9001 *Standard: IEC 61073-1,IEC 60793, IEC 60794, IEC 61754 Application: for home, hotel, office and buildings network wiring Specification *Water-proof design with IP-65 Protection level. *Integrated with splice cassette and cable management rods. *Manage fibers in a reasonable fiber...

Brand Name:PUNAISGD

Model Number:ADSS-72B1.3-60m

Place of Origin:Guangdong, China

ADSS All-Dielectric Self-Supporting Fiber Optic Cable 2km 500m Span 24-144 Cores IEC 60794 Standard Single Communication Cables ADSS all-dielectric self-supporting optical cable is specially designed for overhead power lines. It adopts an all-non-metallic ...

Brand Name:Qingying or QY

Model Number:Outdoor Indoor SC UPC Connectors For Fiber Optic Patch Cord Cable

Place of Origin:Dongguan China

The key is also used for repeatable alignment of fibers in the optimal, minimal loss position. Multimode versions of this connector are also available. Outdoor Indoor SC UPC Connectors For Fiber Optic Patch Cord Cable Product Description Optical fiber in ...

Brand Name:SKYLINE

Model Number:SL-C110

Place of Origin:China

...optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test Standard IEC 60794...

Model Number:HX-GL2

Place of Origin:Guangdong, China

Brand Name:HX

G.652 G.655 50/125 μm 62.5/125 μm Attenuation (+20°C) @850nm ≤3.0dB/km ≤3.3dB/km @1300nm ≤1.0dB/km ≤1.0dB/km @1310nm ≤0.36dB/km ≤0.40dB/km @1550nm ≤0.22dB/km ≤0.23 dB/km Bandwidth (A-level) @850nm ≥500 MHz·km ≥200 MHz·km @1300nm ≥1000 MHz·km ≥600 MHz·km ...

Brand Name:MingTong

Place of Origin:Dongguan CHINA

...Cable 1km Per Drum IEC 60794 Standard Outdoor Fiber Optic Cable 1 2 4 Core G652D LSZH FRP Kfrp FTTH Drop Cable 1km Per Drum The FTTH drop cable is positioned in the centre. Two parrallel fiber reinforced plastics(FRP) are placed at the two sides. A steel wire as the additional strength member is also applied. Then, the cable...

Brand Name:TTI Fiber

Model Number:FTTH

Place of Origin:China

...Cable Indoor/Outdoor Single Mode Fiber Optic Cable with Steel Wire / FRP Strength Member Describution: The optical fiber unit is positioned in the centre.Two parallel Fiber Reinforced Plastics(FRP) are placed at the two sides.A steel wire as the additional strenght member is also applied. Then the cable is completed with a black or color LsZH sheath. Features: Compliant with: ANSI,Bekkcore,TIA/EIA,IEC...

Model Number:Drop cable GJYXFCH

Place of Origin:China

Indoor Outdoor 1 2 4 Core Ftth Drop Cable G657a Fiber Optic Patch Cord Description: Low insertion loss, high return loss Available FTTH Drop cable diameters: Φ2.0*5.0mm; Φ2.0*3.0mm Connector Types: LC, FC, SC,ST for option Fiber Mode: G652D, G.657A1, G657A2, G657B3 Ferrule Interface Type: UPC to UPC, APC to APC, APC to UPC Compliant to IEC standard Application FTTH network for indoor and outdoor Local Area Network and Building Cabling...

Brand Name:HUAXIN or OEM

Model Number:Pre-Connectorized Drop Cable

Place of Origin:CHINA

Tensile load & compression characteristics are enhanced by inserting a steel wire and FRPs, offering protection for optical fibers from physical impact from outside with the gap provided inside the cable thereby resulting in excellent optical & mechanical ...

Place of Origin:CHINA

Brand Name:SKYLYNN or OEM, ODM

FTTH Outdoor Flat Drop Patch Cords Description The material of the flat drop patch cords are all-weather and UV-resistant. They are very reliability and stability. And they are cost effective solution for in house termination. This kind of flat drop patch ...

Brand Name:Dawnergy

Model Number:GYTS-12/24/48/96/144 G652D

Place of Origin:CHINA

...-1-2 Optical fibre cables-part 1-2: Generic specification-Basic optical cable test procedure IEC 60794-3 Optical fibre cables-part 3: Sectional specification-Outdoor cables 2. Cable Cross-section 3. Cable Identification 2.1 Fiber color code No. 1 2 3 4 5 6

Brand Name:OMC or OEM

Model Number:Duplex Twin Flat OM3 2F

Place of Origin:China

... with a layer of aramid yarn as strength member units, such unit is extruded with a layer of PVC or LSZH material as inner jacket. The cable is completed with a figure 8 PVC or LSZH jacket. Standards Comply with standard GR-409, IEC 60794-2-10/11, meet the

Brand Name:YUANTONG

Model Number:ADSS -24

Place of Origin:CHINA

... tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a