insulating sleeves plug pins testing apparatus

Brand Name:Sinuo

Model Number:SN2140

Place of Origin:China

...Insulating Sleeves Of Plug Pins Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of plug pins and plug with insulation sleeve. Use a heating plate to heat the copper socket to simulate the abnormal heat of the plug and pin insulation sleeve, so as to test...

Brand Name:HongCe

Model Number:HC9926

Place of Origin:China

...Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Of IEC Testing Equipment Standard: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Test sample: Insulation Sleeve of plug pins...

Brand Name:kingpo

Model Number:KP-GC012

Place of Origin:china

... 28. It is used to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:PEGO GROUP

Model Number:PG-PIT

Place of Origin:China

Plug Torque Test Apparatus for Devices Forming a Part of the Main Plug IEC60065 IEC60884-1 1. Introduction Plug torque test device is designed according to IEC60065 clause 15.4.1 and figure 11, IEC60950-1 clause 4.3.6, IEC60884-1 clause 14.23.2 and etc..It is applied to check the socket outlet mechanical strength of direct plug-in equipment. A device provided with pins...

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots...

Brand Name:HJ

Model Number:HC9926

Place of Origin:China

Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N Standard of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Feature Insulation Sleeves Of Plug Pins Abrasion Test Apparatus...

Place of Origin:China

Brand Name:KeRang

... to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Brand Name:SHC

Model Number:SC-ASF2.5

Place of Origin:China

...Test Apparatus On Insulated Plug Pins At High Temperature Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus for insulation

Brand Name:KingPo

Place of Origin:China

...Insulating sleeves of plug pins Feature: In according with standard requirements, testing resistance to heat and fire of insulating sleeves of plug pins Parameters: Item Parameters Insulation part 5 mm thickness, round and flat, diameter equal to twice the

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:CHENXIN

Model Number:CX-NBR3

Place of Origin:CHINA

...Plug Insert(NBR 4.8MM 10A/20A 3-Pin,3-Pole,3-Prong Semi-Insulated) For Plugs Vde​ Feature: 1 Spot wholesale 2 Full range of specifications 3 Electroplating anti-rust corrosion 4 The use of automatic drum plating, the surface gloss is good, the plating layer is difficult to fall off, through the salt spray test 5 Complete specifications, support customization Specification Brand CHENXIN Name Brazil Plug Insert​ Material Copper C3604 Pin

Brand Name:REDY-MED

Model Number:FGG.EGG

Place of Origin:china

...(nickel plated) latch sleeve and mid pieces Housing Material(socket): Brass(Chrome plated) shell, brass(nickel plated) nuts Insulator Material: PPS Contact Material: Brass, gold plated Contact Type: solder Contact Diameter: 0.5mm Max Mating:

Brand Name:Realeader

Model Number:DR-A02

Place of Origin:China

...Plug 2 Pin 6 Pin Waterproof Electrical Quick Connectors Male And Female Other Parameters Rated Current : ≤2.5A Rated Voltage : 60V Test Voltage : 500V Contact Resistance : 10 MΩ Insulation Resistance : 100 MΩ Operating Temperature : PVC: 0℃~+80℃ TPU : -40℃~+105℃ Plug/Unplug durability : 1500times Connection Mode : Direct Plug-in Product Description 1. Direct plug...

Brand Name:TX

Place of Origin:China

...Pin For Connector Angle Bender Pogo Pin​ Item Stable performance RoHS 90 degree bend pogo pin connector Spring Material Stainless steel/SUS304 Barrel Material Beryllium Copper Sleeve Finish 20u'' Gold over nickel Spring Finish 10u'' Gold over nickel Rating voltage 12V per contact Rating current 1A~3A per contact Insulation Resistance 100mΩ Min. Contact resistance 50mΩ Max. before test and 60mΩ Max. after test at pogo pin

Brand Name:DREAM-START

Model Number:M12 Plug

Place of Origin:GuangDong，China

...plug uses professional high quality black rubber baceute makes it insulating and flame retardant. Threaded locking mechanism, anti-vibration locking design, 19mm threaded connection. Screw sleeve made of metal, gold-plated contacts made of pure copper, sturdy and corrosion resistant, durable while ensuring the stability and reliability of data and signals. Pins M12 Plug...

Brand Name:Sibel

Model Number:S00003

Place of Origin:China

... breakover and pulling force test before goods sent out Cable Color & Length According to customers' requirements Insulation Material PVC Sample Sample is available. QC Passed ISO9001:2008 Quality control system.All the products are 100% test before

Brand Name:Whirltech

Model Number:FGG.1F.307

Place of Origin:China

...Plug F Series 7 Pin Circular Power Connector Self Latching Straight Plug(bend relief available), Push pull self-latching system. Material: Brass (Chrome plated) shell and collet nut; Brass (Nickel plated) latch sleeve and mid pieces. Brass (gold plated) pin/contact PPS material insulator...

Brand Name:UPE

Model Number:C1153A04-A1

Place of Origin:China

...pin magnetic cable usb connector with OD3.0 PVC cable 1.Resistance value test (AT:20C): a. The resistance value between the solder joint and the copper nail is less than 50mΩ b. The resistance value of 1 piece of product wire is less than 60mΩ. 2. Withstand voltage test :100V AC for 1 minute, 5mA Max 3. Insulation resistance :50mΩ Min(500V DC 1 minute) 4.Plug Swing test...