iso plastic testing equipment

Brand Name:LIYI

Model Number:LYXJJD5

Place of Origin:CHINA

...Digital Display Plastic Testing Equipment Sharpy Imapct Testing Machine With Printer ISO 179 Introduction: This sharpy impact tester is used to measure plastic,enhance nylon, glass fiber reinforced plastic, ceramic, and cast stone, plastic appliances, ...

Brand Name:DAXIAN

Model Number:DX8534

Place of Origin:China

...application: Mainly applicable to the determination of plastic test pieces, thermal deformation HDT... Three-point loading under the bending stress deformation temperature and plastic Vicat softening temperature test method ... plastic samples under the

Brand Name:YUYANG

Model Number:YY046

Place of Origin:China

...Test Chamber Plastic Test Equipment Application: Test the flammability of the plastic material spare part in appliances. Flammability, combustion speed, flame spread, the intensity of combustion can be acquired during test automatically and precisely. Standard: Horizontal flame test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210. 50W Vertical flame test:UL94, V0,V1,V2,IEC 60695-11-10,ISO...

Brand Name:Infinity Machine

Model Number:RS-8223A / RS-8223B

Place of Origin:Made in China

..., PVC and coating test block, put coating of test block upward and under ram of the machine and check damage and transformation condition after heavy punch falling and strike of a certain height. Test standards: JIS-K5400,ASTM ,EN,GB,ISO,UL Feature: This

Place of Origin:China

Brand Name:CHENGFENG

ISO 871/ ASTM D1929 Test Equipment for Autoignition Temperature Flammability of Plastics Specification Temperature control accuracy ±2°C, adjustable between 150°C~450°C Display accuracy ±0.5°C Timer accuracy 0.1s Stainless steel container ...

Brand Name:kingpo

Model Number:ISO 18250-3 Fig C.4

Place of Origin:china

ISO 18250 Test Equipment ISO 80369-3 Figure C.4 Cross Reference Connectors ISO 80369-3 Small-Bore Connectors for Liquids and Gases in Healthcare Applications - Part 3: Connectors for Enteral Applications; ISO 80369-3 Figure C.4 Cross Reference Connectors is for testing cross port reservoir connector for: ISO 18250-3 Clause 6.5: Resistance To Separation From Axial Load ISO...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic...

Brand Name:KINSGEO

Model Number:KJ-3095

Place of Origin:CHINA

... characteristics of plastics materials is according to the American UL94 standard and GBT2408 a parts for <Equipment and instruments in plastic material flammability test of relative clauses specified >in the design and manufacturing, plastic parts of

Brand Name:RISING

Model Number:RSCX

Place of Origin:China

...power source is only less than 1/10 of measured equipment; with smaller volume and lighter weight compared with the equipment in same capacity. The device with large output capacity and small power supply capacity, low cost, easy to operate and safe. 2

Brand Name:HTI

Model Number:TNT-11

Place of Origin:Dongguan china (mainland)

...ISO Package Testing Equipment for Paper Carton Compression Application: Drop impact tester used in toy, electron, electric equipment, communication, furniture, gift, ceramic and other packages for testing during the application and transportation, handling which will get the infection of dropping and shocking. Except the flat dropping, it is also can do arris or angle dropping. The test...

Place of Origin:China

Brand Name:GC

Model Number:GC-QK-Z

...QK-Z Product introduction: The plastic electric notch prototype machine(BST-QK-D) is a sample making equipment used in the impact toughness test of non-metallic materials by IZOD and simply supported beam impact testing machine. Laboratories of scientific ...

Brand Name:Haida

Model Number:60087-HD

Place of Origin:China

HD-DRH-V Thermal Conductivity Tester The thermal conductivity tester is mainly used to test plastic, rubber, glass, fiber, benzene board, extruded plastic board, foamed concrete, hollow glass, wood board, all kinds of heat preservation materials and other...

Brand Name:ZL

Model Number:ZL-9006B

Place of Origin:CHINA

... strength) special test equipment. The board puncture strength tester with fast compression, operating handle automatic reset and safety reliability, with a liquid crystal display, ...

Brand Name:vouch

Model Number:5600

Place of Origin:china

Automatic Plastic Testing Equipment Combustion Simulation Fire Hazard Test Lab Technology data: Accord with standard:IEC-60695,GB5169 Size:1120w*600d*1020h Flame height adjust:5-...

Brand Name:GAOXIN

Model Number:GX-5010

Place of Origin:China

Vamp Flexing Grips 12 Groups Shoe Bending Grips 3 Groups Freezing Test Chamber The vamp flexing testing grips is a continuous flexing quick action in a low temperature condition, which simulates the situation in which the shoe surface is squeezed, ...

Brand Name:Techcore

Model Number:5" Retrievable Bridge Plug

Place of Origin:China

Retrievable Bridge Plug For Well Downhole Testing / Completion The 3L retrievable bridge plug consists of packer-type sealing elements, mechanical slips, and a large-area bypass. The sealing elements of retrievable bridge plug are less susceptible to ...

Brand Name:JINHAIHU

Model Number:DJC-1

Place of Origin:BEIJING, CHINA

DJC-1 Single wire cable vertical combustor Scope of application The vertical combustion tester of single wire and cable is mainly used to evaluate the combustible properties of single wire and cable with conductor diameter greater than 0.8 mm or cross ...

Brand Name:HOOHA

Model Number:ZY6070

Place of Origin:China

...standard: Consistent with GB/T 2407-2008: determination of combustion characteristics of plastic hard plastic samples with hot rod contact and ISO/T 2407:1981 test standard. Main parameters: The test chamber volume: 1 m з. Material: for baking paint (or

Brand Name:HAIDA

Model Number:HD-A801

Place of Origin:Guangdong, China (Mainland)

...Test Tensile Strength Test Equipment Application To determine the ballistic tearing strength of woven fabrics, plastic films, paper, or other similar materials. Standards Textile: ASTM D1424, DIN 53862, EN ISO 13937-1, ISO 4674-2, ISO 9290, M&S P29, NEXT 17 Plastics: ASTM D1922, ISO...

Brand Name:AI

Model Number:AIC-19921

Place of Origin:CHINA

...Test Equpiment for Valve, Hose & Pipes Introduction: This fire resistance test equipment complies with the following standards: • Valve Fire Test (ISO 10497) • Fire Test hoses (ISO 19921 & 19922) • Plastic Pipe Fire Test (FTP II Res A 753) In the case of internal pressure, valves using a burner simulation of fire, for marine and similar joints of pipe and fire resistance test...