low residue chloride process titanium dioxide

Brand Name:TINOX

Model Number:A-2380

Place of Origin:CHINA

...Chloride Process Titanium Dioxide is a white inorganic powder produced through the chloride process. This product has a high purity of 99.5%, and reaches up to 97-99% in terms of whiteness. Its PH value is 6.5-8.0, and residues on sieve are as low as 0.1%. Additionally, only 0.3% matter is insoluble in water, making Chloride Process Titanium Dioxide an ideal choice for applications in various fields. Chloride Process...

Brand Name:EXCEEDCHEM

Model Number:R-666

Place of Origin:China

Titanium Dioxide For Plastics R-666 Characteristics Titanium Dioxide For Plastics R-666 undergoes inorganic encapsulation and organic treatment, making it suitable for a wide range of plastic applications. It features high dispersibility, strong coverage, high brightness, a blue undertone, low sieve residue, and low volatility. Typical Properties Index R-666 TiO2 Content(%) 97.87 Rutile Conversion Rate(%) 99.6 25μm Sieve Residue...

Brand Name:hengyang

Model Number:HC409

Place of Origin:China

...process or the chloride process and the main raw materials include ilmenite (FeO/TiO2), naturally occurring rutile, or titanium slag. In essence the process converts the impure TiO2 feedstock into an easy to purify intermediate, separates out the impurities then converts back to pure TiO2 . Ilmenite concentrate (FeTiO3) The primary raw material in the titanium dioxide production process...

Brand Name:DLX

Model Number:Inconel 600

Place of Origin:China Jiangsu

... monomer: resistance to chlorine gas, hydrogen chloride, oxidation and carbonization corrosion 3. Uranium oxidation conversion to hexachloride: resistance to hydrogen chloride corrosion 4. Titanium dioxide process with chlorine gas 5. Nuclear reactors 6

Brand Name:zheheng

Model Number:5mm

Place of Origin:Wenzhou

... gases reacted to produce titanium tetrachloride. Alloy 600 has been successfully used in this process due to its excellent resistance to corrosion by hot chlorine gas. This alloy has found wide usage in the furnace and heat-treating field due to its

Brand Name:ZK

Model Number:Customized

Place of Origin:China

... kilns, it has the lowest heat consumption, high activity of calcined lime and low residual carbon dioxide. Process Characteristics of Double-Chamber Shaft Kiln: The stone is loaded from the top of the kiln, and the fuel is fed into the upper part of the

Place of Origin:China(Yixing, Jiangsu)

Brand Name:Juneng Machinery

Model Number:ZX-25

... seen in process lines handling titanium dioxide, flue gas, brine clarification, red mud, china clay, fine chemicals and many other applications that require efficient low moisture cake filtration or high degree of polishing. The candle filters are also

Brand Name:Wenhou

Model Number:Lithopone B311

Place of Origin:Hebei, China

...o called Charlton white. The appearance is white powder, non-toxic, low oil absorption, alkali resistance, good chemical stability, heat resistance and the good abrasion resistance. During the white pigments, the hiding power next to titanium dioxide, not

Brand Name:Zhengtong

Model Number:0.6-0.8mm~10mm

Place of Origin:Zhengzhou

..., and formed by a sintering phasing process. It has the characteristics of high compressive strength and low abrasion, and is widely used for superfine grinding of calcium carbonate, kaolin, titanium dioxide, paint, ink and other products. Manufacturin

Brand Name:HUAQUN

Model Number:Reflective type

Place of Origin:Guangdong, China

... , good compatibility with EVA , good heat stability. 3.PE wax: Heat resistance , abrasion resistance, as a lubricant, increase paint processing performance. 4.Calcium carbonate: High precise classification, high whiteness. 5.Glass beads:

Brand Name:Jeff Glass

Model Number:JF0059

Place of Origin:Guangdong, China

...break down organic material so that water can remove it as it sheets off the glass. This low-maintenance glass is “sprinkled” with metallic titanium dioxide atoms during the glass manufacturing process. The coating forms a microscopic layer on one side

Place of Origin:China

..., copper, magnesium, cadmium, lead, and titanium. Zinc alloy has low melting point, good fluidity, easy to weld, braze, and plastic processing. It is corrosion resistant in the atmosphere. The residual material is easy to recycle and remelt. However

Place of Origin:China

..., copper, magnesium, cadmium, lead, and titanium. Zinc alloy has low melting point, good fluidity, easy to weld, braze, and plastic processing. It is corrosion resistant in the atmosphere. The residual material is easy to recycle and remelt. However