lv cable termination kit 2 core

Brand Name:ZKCS

Model Number:20kv

Place of Origin:CHINA

20kv Three Core Silicone Rubber Outdoor Cable Termination For Power Cable Insulation Applicable to the voltage level 12/20kV, 18/20kV single-core, multi-core cross-linked power cable connection, with function of the seal, insulation, stress evacuation. ...

Brand Name:DUWAI

Model Number:10kVWLJ

Place of Origin:China

Products Description DUWAI Cold-shrinkable cable termination kit & straight joint kit This product adopts high quality liquid silicone rubber,The excellent performance, stress control material, and strong resistance to electric traces will make the cold ...

Brand Name:UT-King

Model Number:FTTH630

Place of Origin:China

... Fiber Optic Cable Stripping - High-quality FC-6S Fiber Cleaver Recommended FTTH Cold Welding for Single or Multi-Mode Core Cutting of Fiber Size 125um and a Skin Diameter 250~900um,Optical Power Meter, 10mW Visual Fault Locator (w/o

Brand Name:UPTOGETHER

Model Number:TRSY,JRSY

Place of Origin:Jiangsu, China (Mainland)

0.6kV heat shrink cable termination kits , heat shrink cable accessories , 0.6kV TRSY -2/0-5-4 , material PE 1. Product Introduction 0.6kV heat shrink power cable terminations and joints are consist of anti-tracking tube,heat shrink protected tube and ...

Brand Name:Long

Model Number:0.6-1KV

Place of Origin:China

... For LV Cables For 1 2 3 4 5 Cores Joints and components for other cable types are available on request. Solderless earth connection system for armoured cables is available on request. Selection Table Voltage U0/U(Ura) Cores Cross Section/mm2 Kit No. ...

Brand Name:HICORPWELL

Model Number:Optic Fiber Splice Closure

Place of Origin:China

2 Inlet 2 Outlet Fiber Termination Kits horizontal Type FO 24 to 144 Cores Closure Joint Box 2 inlet 2 outlet ports provided: 4 ports suit for single fiber cable with max Ø16 and minimum Ø7mm. The fittings provided with GJS-8005: 2pcs of special wrench, ...

Brand Name:YINGDA

Model Number:PA0422

Place of Origin:China

Description: Wedge Tension clamp is designed for supporting insulated aerial bundle cable of the LV distribution system at terminal section and at acute angle poles. The wedge can be self-adjusting and the aerial cable are led alongside the clamp. The self...

Brand Name:GAPHO

Model Number:FZQ-18 Fiber Optic Fan Out Kit

Place of Origin:China

... of fiber cable. The design is such that it houses and protects thebare fibers after they are exposed from the main fiber optic cables. The 3mm tubing can hold fiber up to 900um diameter and it also provides the support when the fiber is terminated to

Brand Name:Chuangyin

Model Number:CYSLJ-15-(1)3-25-50

Place of Origin:ShenZhen

15/24/35KV Cold Shrink Cable Joints Single, Three-Phase Cold Shrink Middle 1. Introduction: Apply to single, three core polyethylene and crosslinked polyethylene cable terminal for outdoor connection of cable and overhead line. Widely apply to cable ...

Brand Name:JUNPU

Model Number:JP-I2-16OTE

Place of Origin:China

Indoor/Outdoor 16 Core Fiber Optic Cable Terminal Box FTTH Fiber Optic Tool Kit Products Description The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, ...

Brand Name:New light

Model Number:96F panel

Place of Origin:China

... the adapter of your choice. The panel can also be pre-loaded complete with the required adapter and simple splice management kit, or supplied with pre-terminated cable to meet your project needs. The module box encapsulation structure, collocation to the

Brand Name:ANSHI

Model Number:AS-ODF-CTB-4

Place of Origin:China

Fiber Optic Distribution Box 4 cores / fibers termination box SC/APC with adaptor and pigtails It is FTTH mini optic terminal box , made of high quality plastic, small size, with plastic splice tray inside. It provides an economical way for terminating ...

Brand Name:UNIFIBER-OEM

Model Number:Multifiber

Place of Origin:China

...terminated cable 12/24 core ADSS 2.0/3.0mm break-out patch cord with pulling eye kit Pre-terminated indoor/outdoor fiber cable assembly is designed to support today's data needs while meeting tomorrow's ever-advancing network requirements. It's ideal for connecting the networks of two buildings through the use of an underground conduit, also installed in entrance facilities. Applications CATV; Active device termination...

Brand Name:Senko / US CONEC / Furukawa Connector

Model Number:MPO Fiber Patch Cord

Place of Origin:Shenzhen

...technology, can provides up to single ferrule with 24 fiber cores connections. For reducing the physical space requirement. MTP /MPO solution can be various connector kits, with metal guide pins and precise housing dimensions to ensure fiber alignment when

Brand Name:CFO

Model Number:CFO-Distribution Box

Place of Origin:China

... installations: Ready for wall mount – installation kits provided Space saving: Double-layer design for easier installation and maintenances Easy installations: Ready for wall mount – installation kits provided. Protection level up to IP55 Cabinet can

Brand Name:OEM/ODM

Place of Origin:Guangdong, China

... strand in the kit has a color-coded buffer for easy identification and the colors are industry standard.In this 12-pack, twelve strands of fiber are terminated on one end with SC connectors. Connectors are ceramic with Ultra physical contact (UPC) finish.

Brand Name:OEM/ODM

Place of Origin:Guangdong, China

Model Number:12 Core Fanout Pigtail Simplex Optical Fiber Pigtail Cable

... strand in the kit has a color-coded buffer for easy identification and the colors are industry standard.In this 12-pack, twelve strands of fiber are terminated on one end with SC connectors. Connectors are ceramic with Ultra physical contact (UPC) finish.

Brand Name:FOCC

Model Number:FOCC - 090

Place of Origin:China

...Core MTP Fiber Optic Patch Cables Two Ends Connectors FOCC can offering various of mode Fiber Optic Patch Cables, named jumpers also, and this kind of Optical Fiber Patch Cord is the Cable with Connectors Terminated on its Two Ends Respectively to Realize the Jumping Connection of Light Path. Features MPO MTP assembled with jacketed ribbon cable, transition through a square fanout kit...