magnetic reed proximity sensor no bistable

Brand Name:SUMMIT

Model Number:RMS12-PR-B80

Place of Origin:NINGBO CITY, CHINA

...bistable magnetic reed sensors switch Description: Rectangle magnetic sensor RMS12-PR-B80 is one kind of hall effect magnetic sensor switch, and it is professionally used for the elevator&lift floor leveling, and are used to detect the position of the cabin as well as automatic level reset according to the weight. - Position / clearance sensors...

Brand Name:Airtac

Model Number:DMSG-020

Place of Origin:China

DMSG-020 2m cylinder Proximity sensor 2-wire reed induction magnetic switch Ordering code Specification Item DMS Model 2-wire Power supply valtage 10-28VDC Switching current 2.5-...

Brand Name:Winston/OEM

Model Number:SR-401

Place of Origin:China,Zhejiang

... determination of pneumatic and / or hydraulic cylinder and piston pump. It also can be used as limit switch .When the magnetic object approaches, the reed closes and sends out switch signal through magnification. Compared with inductive sensor ,it has

Place of Origin:Zhejiang, China

Brand Name:Kampa

Model Number:CSI-J

CSI-J 220VDC , 5-240V , LED Indicator ,Magnetic Reed Switch Pneumatic Electric Magnetic Switch 1. Pictures of proximity sensor switch , Specification: Model Cylinder Series Attachment CS1-F SC,MAL,MA,C85 CS1-U SC,MAL,MA,...

Brand Name:CNAMPFORT

Model Number:CSFGHG-TP-2.6X12

Place of Origin:CHINA

...envelope. Single-pole, single-throw (SPST) type, having normally open contacts, and containing two magnetically actuated reeds. The switch is of the double-ended type and may be actuated by an electromagnet, a permanent magnet or a combination of both. The

Brand Name:F&C

Model Number:FD-07R

Place of Origin:China

Normally Open Electric Magnetic Proximity Switch 2 wire 3 wire reed switch sensor Model:FD-07R Switch : Normally open Indicator: Red LED Maximum frequency: 1000Hz Maximum current: 100mA ...

Model Number:DC-1581WG W

Place of Origin:China

Brand Name:ALEPH

... part which contains a reed switch. When these two magnetic parts get close enough, by electromagnetic induction,it will connect the electrical circuit. And this distance is called "detection distance." Usually, one of these two parts is installed on a