manganese flakes for welding rods

Brand Name:ZhenAn

Model Number:electrolytic manganese

Place of Origin:China

...Manganese Flakes for Welding Rods and Specialty Alloys 99.9% pure EMD (Electrolytic Manganese Dioxide) manganese flakes are highly suitable for use in welding rods and the production of specialty alloys due to their exceptional purity, chemical stability, and excellent reactivity. In welding applications, manganese...

Brand Name:ZH

Model Number:99.8%,99.7%,99.5%

Place of Origin:China

..., the most widely used manganese copper alloy, manganese aluminum alloy, 200 series stainless steel, manganese in these alloys can improve the strength of the alloy, toughness, wear resistance and corrosion resistance. The metal manganese produced by

Brand Name:Hilbo

Model Number:AZ31B

Place of Origin:China

... and ductility for structural application after deformation with severe reductions.Magnesium power products are high-energy, non-polluting power sources, such as magnesium-manganese dry batteries,

Brand Name:Yutai

Model Number:201 202 301 304 316L 321 309S 310S 904

Place of Origin:China

...rod/1mm stainless steel rod/304 stainless steel rod 304 stainless steel welding rod Stainless steel remains stainless, or does not rust, because of the interaction between its alloying elements and the environment. Stainless steel contains iron, chromium, manganese...

Brand Name:Longway

Place of Origin:China

Model Number:4.5"

... be quenched and tempered with 42CrMo and the surface shall be nitrided as far as possible 3. Friction welding process between joint and rod body to ensure the strength and coaxiality of joint and rod body OD A Wall B Length L Weight lbs ID Pin C Across

Brand Name:Shandong TISCO

Model Number:CA round bar

Place of Origin:Shandong,China

... content of less than 0.25%. This metal is relatively weaker and softer but more easily welded and ductile, and are often used to machine and weld for a low cost Medium-Carbon Steel: Contains a carbon content of 0.25-0.6%, and a manganese content of 0.6-1

Brand Name:Tisco Technology

Model Number:310S

Place of Origin:Jiangsu, China

AISI 310S Stainless Steel Rod 4mm 5mm Solid Stainless Steel Round Bar 310 stainless steel bar, also known as UNS S31000 and Grade 310, contains the following primary elements: . 25% maximum carbon, 2% maximum manganese, 1.5% maximum silicon, 24% to 26% ...

Brand Name:COMESH

Model Number:HE25041801

Place of Origin:CHIAN

... in shot blast machine,so called it shot blast belts too. MN Steel belt belong to balance weave belts, but its spiral wire and rods dia is very big from 5.0 mm to 10 mm; For the edge of shot blast belts,there are weld, ladder and knuckled edge to choose.

Brand Name:Lianbang

Model Number:1050,1060,2014,3003,4032,5454,5754,5056,5082,5086,6061,6060,6082,7075,8011,etc

Place of Origin:China

...it. There are chromium and manganese elements in trace quantities. The material has good strength even after welding. The 5086 Aluminum Flat Bar is made up of a magnesium alloy of aluminum that is non – heat treatable. But it could be hardened further by

Brand Name:Torich

Model Number:30CrMnSia /45MNMob

Place of Origin:China

...Rod, Drilling Pipe Analysis of mechanical properties of 30CrMnSiA chemical composition 1. 30CrMnSiA is read as 30 chromium manganese silicon A, which is a grade of alloy structural steel prescribed by the standard. Unified digital code: A24302. 2. 30CrMnSiA belongs to medium carbon, with high strength and poor welding...

Brand Name:XINPIN

Model Number:K10/K20/YL10.2

Place of Origin:China

... fiber, chilled cast iron and heat-resistant alloy steel, high-temperature alloy steel, stainless steel, high manganese steel, etc. It can manufacture of drill bits, end mills, and

Brand Name:Mittel

Model Number:S355J2

Place of Origin:China

S355J2 steel is a carbon manganese ,high yield non alloy steel. It is called S355 because of the average minimum yield for this material is 355 Mpa.As a structural steel,it has excellent strength and weldability.It can be readily welded to other weldable ...

Brand Name:HYX

Model Number:1080

Place of Origin:China

1018 Cold Rolled A low-carbon steel with medium manganese content. This alloy is easily case hardened and welded, and has a fair machinability. Conforms to ASTM A-108. 1018 Cold Rolled Minimum Properties Ultimate Tensile Strength, psi 63,800 Yield Strength...

Brand Name:BLM-NC-1

Place of Origin:Jiangsu, China (Mainland)

... purpose metal that was originally designed as a temperature alloy and therefore performs well at high temperature around 1800ºF. The additions of silicon and manganese assist to inhibit wear, galling and fretting even in the annealed condition. Through

Brand Name:TECHANG

Model Number:TCXZS

Place of Origin:China

... powder, soy sauce, juice, etc. 3. Metals, metallurgy and mining: aluminum powder, lead powder, copper powder, ore, alloy powder, welding rod 4. Powder, manganese dioxide, electrolytic

Brand Name:Guangda

Place of Origin:Jiangsu China

...nuts, screws, tie rods, small shafts, brake gear.C22 is a kind of high quality carbon structural steel, high manganese low carbon penetration steel, good welding performance, but high hardenability, strength and plasticity. Forged Round Bar 1.0402 C22 Product features ...

Brand Name:Sylaith

Model Number:3003 5052 5083 6061 6063 6082 7075

Place of Origin:China

...3000 series aluminum rod is made of manganese element as the main component. Content between 1.0-1.5, it is a series with good anti-rust function. Construction materials, mechanical parts, forging materials, welding materials; Low melting point, good...

Brand Name:UST

Model Number:ASTM 4140

Place of Origin:MAINLAND CHINA

..., and manganese. Known for its impact and abrasion resistance, Alloy Steel 4140 also offers users outstanding fatigue and torsional strength. Welding is possible through most popular techniques, and it has a high level of ductility. Machinability is

Model Number:A6082

Place of Origin:China or Imported

Brand Name:Domestic or Imported materials

...Rod 6082 Aluminum has the capable of heat-strengthened, with medium strength and good welding performance and corrosion resistance. This material is mainly used in transportation and structural engineering industries. Chemical Composition WT(%) Silicon Iron Copper Magnesium Manganese...