material flow rate analysis and evaluatio

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

... is a plastic extruder. It works under the specified temperature to melt the sample by using heating furnace. The melted sample flows out a specified hole under the given load. In plastic producing activities, we usually use the melting index to, under

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

Melt Flow Rate Testing Instrument for Plastic Material Flow Rate Analysis and Evaluatio Operating Principle: Melt Flow Rate Testing Instrument (plastic extruder) analyzes flow properties by melting samples via a heating furnace at specified temps, then ...

Brand Name:KACISE

Model Number:KTG113-C

Place of Origin:CHINA

The KTG113-C oxygen analyzer is used for on-line analysis of oxygen content in building materials Introduction The KTG113-C oxygen analyzer is a high-precision on-line detection and analysis instrument for oxygen content in inert gases, developed by our ...

Brand Name:SKYLINE

Place of Origin:China

...rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power supply voltage AC220V AC 50Hz Maximum operating power ≥5KW Cone heater power ≤5KW Heat output heat 0~120KW/m2 The maximum placement of the sample box 100mm × 100mm × 50mm Exhaust flow rate 0.012m3/s~0.035 m3/s (adjustable) Timing value resolution 1s error <1s/n Oxygen analysis...

Model Number:N035.3ANE

Place of Origin:China

Brand Name:BAXIT

BAXIT PN035.3ANE Vacuum Pump Product Information: BAXIT N035.3ANE oil-free diaphragm vacuum pump is a compact dry vacuum pump designed for gas sampling and analytical instruments. It adopts oil-free diaphragm structure, no oil contamination to the conveyed...

Model Number:YYF006

Brand Name:YUYANG

Place of Origin:Guangdong

Fire Propagation Apparatus (FPA), Flammability Test Machine Compliant with ISO 12136, ASTM E2058, and FM 4910 standards, this Fire Propagation Apparatus (FPA) is designed for comprehensive flammability testing of materials and products. The FPA provides ...

Brand Name:YOUBI

Place of Origin:CHINA

Model Number:UP-5004

...flow rate testing instrument with advanced temperature control accuracy for plastic materials analysis. Product Description The UP-5004 melt flow rate testing instrument is designed to determine the melt flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials...

Brand Name:Baode

Model Number:BL6 series

Place of Origin:China

...Exchanger Product Description Analysis of heat transfer efficiency The heat transfer efficiency of plate heat exchangers depends on a number of factors, including plate material, flow path design, fluid properties, flow rate and temperature difference. The...

Brand Name:YIXING

Model Number:YX007

Place of Origin:ZHEJIANG, CHINA

OEM and ODM Acceptable Material Brass and copper element Material analysis Cu≥59% Water pressure testing 1.6MPA Air Pressure Testing 0.6MPA Water flow rate Bath/Shower Mixer18-45 L/min Cartridge Life time 300,000 times Open and Close,WRAS CERTIFICATE Body ...

Place of Origin:CHINA

Brand Name:OEM

...: For medical Certificate : ISO 9001/ISO 13485 / ISO 14001 / OHSAS 18001 Description In addition to factors such as tight tolerance, flow rates and wicking capabilities; cleanliness and aesthetics are of paramount importance. For medical device solutions,

Brand Name:ZL

Model Number:ZL-3048

Place of Origin:CHINA

...flow properties and viscosity characteristics of thermoplastic materials. This instrument provides essential scientific data and detailed analysis reports for studying polymer rheological properties, shear rate viscosity changes, quality management, ...