matte finish pu mold release agent

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

... Matte surface Application: The mold should be thoroughly cleaned. Mold cleaning and release agent application should be performed in a well ventilated area. Apply a thin coat at process temperature. It is recommended to apply at least two coats at the

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:China

Mold Release silicone spray 450ML Mold release agent/ silicone spray from factory directly Product Description 1.) It selected the modulation of high load, anti-extreme pressure, high wear-resistant compound raw materials, and selected premium non-toxic environmentally friendly products as the propellant; 2.) Good finishing of the product surface, not greasy, mold releasing for many times, cost savings. Mold release agent: Applicable to mold

Brand Name:JOYWAY

Model Number:PU-7620

Place of Origin:China

...silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe ...

Brand Name:Stoner

Model Number:8#

Place of Origin:The USA

...Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g Basic information 1. Eco-Friendly 311g/can Dry Mould Release Agent/waxis a chemical used to prevent other materials from bonding to surfaces. 2. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release...

Model Number:MK-603

Place of Origin:CHINA

Brand Name:SKYHIL

...Agent Used For PU/PVC Matte Finish Leather Coating Description 1, Matting Agent specialized used for the PU/PVC matte finish leather coating. It provide a medium-high viscosity with a pleasant matte finish. They resist dripping and offer excellent adhesion and high flexibility with wet-dry abrasion resistance. 2, Matting Agent...

Brand Name:CLLZY

Model Number:pva-005

Place of Origin:JIANGSU, CHINA

...the mold surface to prevent the artificial marble material from adhering to the mold, allowing for easy removal of the finished product while protecting the mold from damage. Characteristics: Efficient Mold Release: Ensures good mold release performance,

Brand Name:Ciyu

Model Number:Ciyu10001

Place of Origin:China

... auxiliary materials like plasticizer, soften agent, surface acting agent and dispersing agent, then finally finished thorough specific film-forming technology process. Main Characteristics of PVA film products: 1. High barrier property. (Oxygen ...

Categories:Polyurethane Additives

Country/Region:china

... are meticulously formulated to ensure a clean, easy release every time, minimizing defects and maximizing productivity. Designed for a wide range of elastomers, our products provide a thin, even coating that prevents adhesion to molds, preserving the

Brand Name:Tekoro

Model Number:TE-8049A

Place of Origin:China

... applications, where post mould painting is not required. This product has a light duty silicone content and is a rapid dry, anti-stick mould release agent suitable for cold and hot moulds. It prevents sticking, which increases the

Place of Origin:Hubei, China (Mainland)

Brand Name:huawei

Model Number:Tattoo PU Film

...PU Film with matt finish Material PU Surgical film Color white Certificate ISO, CE, FDA Size Various size according to request Valid life 3 years Description for surgical PU film in roll: 1)The medical surgical film produced in our company is the lasted generation product among nowadays surgical operation films. It consists of waterborne PU film, release...

Brand Name:Chang Feng

Model Number:CF-23

Place of Origin:An Ping China

PU Filter Skeleton Mould For Nissan Heavy-Duty Vehicles Air Filters Materialerial 1. Product introduction The process flow of PU skin molding is as follows: first spray release agent on the upper and lower molds of the skin molding mold, and then spray in mold paint on the surface of the lower mold, which can be sprayed with in mold paint of different colors. Then set the mold and pour two-component polyurethane raw materials, and start the mold

Model Number:UK-NC003

Place of Origin:Foshan, China

Brand Name:Unik Ideas

... & woven bag Style Modern Application Restaurant Bar Coffee Dinning Area Costes chair Tubular steel frame finished with a black matte lacquer. Molded plywood with a mahogany veneer or with a black matte finish. Foam upholstery covered with

Brand Name:Tunsing

Model Number:DS1901

Place of Origin:China

Pu Hot Melt Tpu Polyurethane Adhesive Film For Silicone Products Product: DS1901 Description: This kind of hot melt adhesive film for liquid (solid) silica gel high temperature vulcanization molding process has a stable adhesion, and the rubber film and silica gel treatment agent is not toxic, no foaming, no stratification and other characteristics. Composition: Polyurethane Physical Characteristics: Color Transparent Release...

Place of Origin:Fujian, China

Brand Name:OEM

Model Number:OEM

Item custom design silicone wire seal rubber sealing wire for car Material High quality silicone rubber material Size Standard size or customized size based on customer's requirement Color Refer to pantone card number Hardness 30-80 shore A Finish Matt...

Brand Name:Tianyang Rotational Molding

Place of Origin:China

Model Number:ZJ-CS

...molding. In the process of manufacturing large water storage tanks, the specific steps involved in the operation of a roto-molding machine are typically as follows: 1. Mold preparation Clean the mold: Ensure that the interior and exterior of the mold are clean, avoiding any impurities that may affect the finished product. Apply release agent: Apply release agent...