melt volume flow rate tester

Brand Name:Delta

Model Number:MFR

Place of Origin:China

Melt Volume Flow Rate ASTM D1238 Melt Flow Rate Tester by Extrusion Plastometer Introduction: MFR ASTM D1238 Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ASTM D1238 Melt Flow Rate Tester is suitable for ...

Brand Name:JINHAIHU

Model Number:XNR-400AC

Place of Origin:BEIJING, CHINA

... device for testing the melt flow rate of thermoplastics under certain condition. Melt flow rate (melt index) of thermoplastics is melt mass or volume which flow though the standard capillary die every 10 minutes, indicating by MFR. It’s different from

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Melt Flow Rate Tester , LCD Plastic Testing Equipments Application: Plastic rubber melt flow index equipment can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Purpose: Melt flow rate tester (also known as melt...

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...melt flow index melt flow rate tester Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R804-1

...Melt Flow Rate Tester Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate...

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

..., nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-BPV

...n various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

ASTM D1238 ISO 1133 Electric Melt Flow Rate Tester of PP PE Material MFR/MVR Description: Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, ...

Brand Name:HongCe

Model Number:hcrtb-002

Place of Origin:CHINA

... acquisition architecture, and vector frequency conversion current stabilization technology. This enables fully automatic and accurate detection of gas relay flow rate, volume,

Place of Origin:China

Brand Name:CHENGFENG

Melt Flow Rate Meter, Suitable for the Determination of the Melt Mass Flow Rate of Thermoplastics Specification Advantages that distinguish it from other domestic manufacturers of melt flow rate meter: 1. The heating cylinder is made of 304 stainless steel or alloy, because the melt flow rate...

Brand Name:HiYi

Model Number:ZR-3061

Place of Origin:China

ZR-3061 Flue Gas Flow Rate Tester OVERVIEW ZR-3061 Flue gas flow rate tester is a handheld portable instrument used to measure the flue gas flow rate, flow, dynamic pressure, static pressure, temperature and other parameters of stationary pollution source...

Place of Origin:China

Brand Name:Wellmedlab

Model Number:YL-B

... according to national standards and specially used for testing flow rate of medical devices. Applicable to infusion set, transfusion set, infusion needle, catheters, filters for anesthesia,etc. Description: Range of pressure ...

Brand Name:Sunjun

Model Number:EMD,ALCO,GE or as your request

Place of Origin:China

... finish 4. Sample accept by customer 5. Start of series production 6. Packing and delivery according contract It consists of single stage mixed-flow turbine, centrifugal compressor,

Brand Name:HIGHLAND

Model Number:MYHT-1-5

Place of Origin:China Dezhou

Product Description: The MYHT-1-5 Hydraulic Flow Meters is the perfect tool for measuring the flow of hydraulic fluid in snow cars. With a maximum pressure of 420 Bar, this device is able to handle the high pressures required for efficient snow car ...

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Model Number:LR-A001-A

Brand Name:Lonroy

Place of Origin:China

...acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. 2.Standard GB/T3682-2018,ISO1133-2011, ASTM D1238 3.Product Character 1.English LCD Touched ...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting...

Brand Name:ZL

Model Number:ZL-3014

Place of Origin:China

...Melt Flow Index Tester , MVR / MFR Testing Equipment Download Brief: ZL-3014B Automatic Melt Flow Rate Meter.pdf Applications: Plastic Melt Flow Index Test Instrument MFI of GB/T3682-2000 and ASTM D1238-98.And also ,we design and manufacture the instrument after we made a reference of similar standards ,such as JB/T5456 and ISO 1133 .It is used to determine the melt mass-flow rate (MFR) and the melt volume