methyl methacrylate tg

Brand Name:WeiLi Resin®

Model Number:SA-236-D

Place of Origin:China

SA-236-D is a copolymer of methyl methacrylate and n-butyl methacrylate. It offers hard heat resistance and durability. It also offers fast tack-free time, very good dry and wet adhesion to many plastic ...

Brand Name:Hamamastu

Model Number:S16786-0515WM

Place of Origin:Japan

S16786-0515WM Near Infrared High Sensitivity MPPC Methyl Methacrylate The S16786-0515WM is a near-infrared high-sensitivity Mppc (SiPM) designed for LiDAR applications. The smaller SPAD (Single Photon ...

Place of Origin:Guangdong, China

Brand Name:BESTA

Model Number:Cast Acrylic Sheet

High Gloss Acrylic Wall Panels Methyl Methacrylate Plastic Glass Plate Sheet Product Description PRODUCT INFO DENSITY 1.20gm/m³ COLOR & TEXTURES Over 100 kinds of colors and ...

Brand Name:UV-Lens

Model Number:PC156C55

Place of Origin:China

Polymethyl Methacrylate (PMMA) Intraocular Lens Polymethyl Methacrylate(PMMA) was the first material used for IOLs. It is a rigid, non-foldable, hydrophobic (water content <1%) material. The refractive index is1.49, and the usual optic diameter is 5–7 mm. ...

Brand Name:penghao

Model Number:PH

Place of Origin:CHINA

89mm*71mm *10mm~25mm Dental Lab Material Pmma Disk For AG Milling System Dental PMMA Blocks Features: PMMA block are dedicated to being used in the Dental laboratory field to make temporary crowns and bridge in the aesthetic zone. It is a consumable ...

Brand Name:Briture

Model Number:B-73

Place of Origin:China

Hard Methacrylic Solid Acrylic Resin For Plastic Paint Or Ink Thermpolastic acrylic resin B-73 Representative property: Appearance White powder Solid content 100% Softening point 170-190 TG 100 Molecular weight 80000 Viscosity mpa.s (40% in toluene) 400-...

Brand Name:DR

Model Number:DR-22

Place of Origin:China

...methyl methacrylate and n-butyl methacrylate. It offers hard heat resistance and durability. Since its high MW, its chemical resistance is superior. Specification of Solid acrylic resin Item Value Appearance Beads Glass transition temperature (Tg),°C...

Brand Name:DUKE

Model Number:Sanitary

Place of Origin:Sichuan Chengdu

1.22m*2.44m Sanitary Acrylic Sheets Plexiglass Sky Blue Acrylic Panel Description Acrylic Sheet ( Polymeric Methyl Methacrylate (PMMA) )is made of Methyl Methacrylate(MMA). It has excellent light transmittance, higher mechanical strength. It is also light-...

Brand Name:TOBO

Model Number:AR-785

Place of Origin:China

... 1. Poly (methyl methacrylate) contains polar methyl groups and has obvious hysteretic properties. Its water absorption rate is generally between 0.3% and 0.4%, and must be dried before forming. 2. Polymethyl methacrylate has effective and obvious...

Brand Name:JUHONG

Model Number:TM-26

Place of Origin:China mainland

... is seen everywhere in our daily life. Its chemical name is Polymeric Methyl Methacrylate(PMMA), and is made from the Methyl Methacrylate(MMA) monomer after 5-6 hours’ heating and polymerization. Acrylic is a kind of important thermoplastic and developed

Brand Name:KSSEYE

Model Number:14.0mm

Place of Origin:CHINA

...Materials: HEMA-NVP Base curve: 8.5mm 1. Material: silicon hydrogel, hydrating polymer (methyl methacrylate, hydroxyethyl methacrylate, glycine methacrylate, etc.). 2. Center thickness: Generally speaking, the center thickness of low water content lens is

Brand Name:WeiLi Resin®

Model Number:SA-236-1

Place of Origin:China

...Solid acrylic resin SA-236-1 is similar to PARALOID™B-66, it is a fast-drying copolymer of methyl methacrylate and n-butyl methacrylate. It offers hard heat resistance and durability, helping aerosol coatings form smooth, long-lasting films on metal, plastic...

Brand Name:Mason

Model Number:M-000

Place of Origin:China

...e from two sheets of glass. The mould/monomer is then submerged in warm water and the process of polymerization takes place. The result is a sheet of rigid PMMA (polymethyl methacrylate) or what is generically called Acrylic. Applications Widely used in

Brand Name:Audental

Model Number:UT/DUT

Place of Origin:China

... monomers such as bisphenol A glycidyl methacrylate, 2-hydroxyethyl methacrylate, 10-(2-methacryloyloxyethyl) phosphoric acid dodecyl ester, 2-methyl-2-propenoic acid decyl ester, a photoinitiator system containing camphorquinone and 2-(dimethylamino

Brand Name:JXD Acrylic

Model Number:Cast Acrylic Sheet

Place of Origin:China, Shandong

...t offers a wide range of applications. Made from 100% Virgin MMA (Methyl Methacrylate), this clear acrylic sheet is renowned for its exceptional transparency and high quality. One of the key features of this Clear Acrylic Sheet is its outstanding clarity...

Brand Name:C B Dental

Model Number:3DY-1

Place of Origin:China

High Durability CAD CAM 3D Printing Temporary Crowns Durable Resin 3D printing materials for dentistry Resin: Resin teeth are teeth made of methyl methacrylate, with moderate hardness, similar in shape and color to natural teeth, not easy to break, and wel...

Place of Origin:Chongqing, China

Brand Name:NIUBAI

Model Number:Mirror acrylic sheet

... Good electrical resistivity Good UV resistance Products Information Name Mirror PMMA sheet, rob, tube Material Poly (methyl methacrylate) Specification Customized Color Transparent,etc. Features Weather resistant, transparency, hardness, anti-corrosion,

Brand Name:HICORPWELL

Model Number:1.0/2.0/2.5/3.0/3.5/4.5MM Plastic Bare Fiber Optic Cable

Place of Origin:China

1.0/2.0/2.5/3.0/3.5/4.5MM PMMA Lighting Decoation Plastic Bare Fiber Optic Cable Plastic Optical Fiber (POF) is a unique member of the optical fiber family. POF is made of Poly Methyl Methacrylate (PMMA), with a large core diameter (~1 mm) and high ...

Brand Name:XH

Model Number:XH00

Place of Origin:China, Shenzhen

... is methyl methacrylate. It is the best and easiest thermoplastic material in plastics. Its various finished product specifications are widely used in color light cover, lighting ...

Place of Origin:Zhejiang, China

Brand Name:ALS/ OEM

Model Number:ALS05-00

... changing, taste, etc. Tensile bond strength: under the conditions of (37±1)°C, the tensile bond strength should not be lower than 17Mpa. [Main components] Double methyl methacrylate acid, modified epoxy resin, silica filler