mm om2 pon fiber optic splitter

Brand Name:Yogel

Model Number:mini-1*2

Place of Origin:Shanghai

1x2 PLC Splitter Module type MM-OM2 2.0mm 1Meter Fiber Optic Coupler 1 in 2 out Description PLC splitter (Planar Lightwave Circuit Splitters) is a passive device that does not require extermal engery, as long as it has input light.PLC Splitter is key ...

Brand Name:SLR

Model Number:SL-mini PLC-1x16 APC

Place of Origin:GUANGDONG CHINA

... optical waveguide technology. It features a compact size, high reliability and wide operating wavelength range with good channel-to-channel uniformity. It’s widely used in PON,ODN,FTTX point to connect between termination device and central office to

Brand Name:KCO

Model Number:PLC-mini-1x8

Place of Origin:Guangdong, China

0.9 mm 1*8 Fiber Optic Splitter / Passive Fiber PLC Splitter 1X8 With Fan Out Kits Overview: - Mini type of fiber optic splitter can be a steelless tube or also can make with a fanout kits to match customer request. - PLC splitter are based on Planar ...

Place of Origin:hubei

Brand Name:CY/OEM

Model Number:1 x 16 module cassette PLC splitter sc/apc

Brand Name:: CY Place Of Origin:: Hubei, China (Mainland) Model Number:: 1*16 PLC Splitter Cassette Splitter Type:: PLC Tube Type High Light: multimode fiber splitter , single mode fiber splitter LGX 1260~1650nm, 1*16 PLC ptical Fiber Splitter Cassette ...

Categories:Fused Fiber Splitter

Country/Region:china

Description fbt splitter is a type of optical power management device that is fabricated using Fused Biconical Tape technology. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks...

Brand Name:New Light

Model Number:LC/ST/FC/SC/E2000

Place of Origin:China

...Fiber Optical Splitter WDM 0.9 / 2.0 / 3.0 mm PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. DYSFO’ PLC splitter offers superior optical

Place of Origin:Sichuan, China (Mainland)

Brand Name:SINOHONE

Model Number:HY-006

PON Components 2.0 mm 1 x 32 Module ABS Box Fiber Optic Beam Splitter Description: The design of terminal box cover clip greatly reduce installation difficulty. The thin box body can match other electrical junction box panel and is suitable for light and dark fiber optic cable. It is widely used in FTTH, FTTO, FTTD and other terminal field. Applications: FTTx Networks PON Networks CATV System Data Communication Other applications in fiber optic

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-ABS-1x8-OM3-3.0-1.0M-LC

Place of Origin:Guangdong, China

OM2 OM3 OM4 Fiber Optic Splitter 1*8 ABS Box Type Multimode Descriptions: The fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. These beams may or may not have the same optical power as the original beam, based on the configuration of the splitter. By means of construction, the outputs of a optical splitter...

Brand Name:OTOP / OEM ODM Accepted

Model Number:1 * 2 PLC Splitter

Place of Origin:China

.... It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. We provide a whole series of 1 x N and 2 x N

Brand Name:Fujioptic

Model Number:1x2 1x4 1x8 1x16 1x32

Place of Origin:Wuhan, China

...silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Pigtailed ABS splitter is most commonly used in the PON networks. It provides the complete protection for inner optical components and

Brand Name:Seacent

Model Number:1x2 micro type

Place of Origin:Guangdong , China

...Fiber Optic Splitter 1x2 for FTTB FTTX PON CATV Fiber Optic PLC Splitter 1x2 micro type with SC/APC connector Fiber optic splitter is an integrated waveguide optical power distribution device , which also referred as optical splitter. It plays an important role in passive optical network (EPON, GPON, BPON, FTTX, FTTH and so on) by allowing a single PON...

Model Number:FBT ST

Place of Origin:China

Optical FBT 1×2 Splitter/Coupler MM With ABS Box ST Connector 2mm 3mm Introduction: Optical coupler is an optical device that combines or splits power from optical fibers. Optical splitter divides light from a single fiber into two or more fiber channels...

Brand Name:YINGDA

Model Number:FDB0216G

Place of Origin:china

...Fiber Optic Splitter Box SC LC Duplex Fiber Termination Box PON Netowrk Outdoor Pole Mount Model:FDB0216G This outdoor fiber optic terminal box is widely use in FTTH network or cable distribution systems, it can be wall mount or pole mount. And maximum can hold 1x16 plc splitter...

Brand Name:OPTFOCUS

Model Number:PLC-B0104-XX-XX-15

Place of Origin:Guangdong, China(Mainland)

...Fiber Optic PLC Splitter 19’' RACK 1260nm - 1650nm PON Networks Low PDL​ Description Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical...

Brand Name:KELONG

Place of Origin:CHINA

...Fiber Optic Splitter For PON Transmission PLC Splitter Same as cable transmission system,optical network system also need signal coupling,branching and distribution,splitters can meet these functions.Splitter is the important device in PON transmission system,splitters can make the input optical signal into multiple output optical...

Brand Name:UNIFIBER

Model Number:PLC

Place of Origin:CHINA

...optical splitter, 4 way PLC PON splitter/ fiber splitter,0.9mm ABS BOX,China PLC Splitter manufacture Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical...

Brand Name:JUNPU

Model Number:1x16

Place of Origin:China

...Fiber Optic Splitter, Fiber Optic Splitter Box For Fiber Optic Cable Description: An optical fiber splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features a small size, high reliability, wide operating wavelength range, and good channel-to-channel uniformity, and is widely used in PON networks to realize optical...

Brand Name:TTI

Model Number:S-1

Place of Origin:China

...Fiber Optic Splitter 1x4 PLC Splitters 1650 nm 1. Description: PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. TTI fiber optic plc splitters offer superior optical

Brand Name:Begate

Model Number:1x8

Place of Origin:China

...PON PLC Fiber Optic Splitter With ABS Enclosure And SC Pigtail PDL polarization loss is an important index to measure the fiber optic PLC splitter, but if the operation is not standard during the test process of PLC splitter, it will bring large error and affect the accuracy of the test. So how to reduce the measurement error and form good habit for PDL test of fiber optic PLC splitter...

Brand Name:wangtong

Model Number:plc splitter

Place of Origin:Guangdong, China (Mainland)

FTTH manufacturer fiber optic 1x2 1x4 1x8 1x16 1X32 1X64 1X128 plc splitter with SC/APC/UPC connector Description Fiber Optic splitter is also called optical splitter,is one of the most important passive devices in optical fiber link,is with multiple ...