n male dummy load for connection

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-ONM

Place of Origin:CHINA

...Male Dummy Load RF Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load

Brand Name:Vinncom

Model Number:VN-LD-6G-10W-ONm-R

Place of Origin:CHINA

DC-6GHz 10W Dummy Load /Termination Load Satisfying ROHS Compliance Wide band Good VSWR ​ VN-LD-6G-10W-ONm-R.pdf Part Number VN-LD-6G-10W-ONm-R Operating Frequency ( MHz ) DC-6000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor Operating Temperature ( �...

Brand Name:Terui

Model Number:SMA-50JRN-50JR-18A

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...

Brand Name:HICORPWELL

Model Number:SMA-K Calibrator

Place of Origin:China

... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction data for the cheap SMA cal kit by measuring the cal standards after the ...