non destructive testing ultrasonic probe

Brand Name:AE

Model Number:SUB100

Place of Origin:Guangdong

...non-destructive testing ultrasonic flaw detector Product description SUB100 series portable ultrasonic flaw detectors are mainly used for detecting, locating, evaluating and diagnosing various damages, and can perform non-destructive testing on all kinds of metal equipment or equipment. Key technical indicators Item Indicator Item Indicator Testing...

Place of Origin:China

Brand Name:HUATEC

Model Number:TG4000

Non Destructive Testing Equipment Through Coating Ultrasonic Thickness Gauge TG 4000 with Velocity Range 1000 - 9999 m/s TECHNICAL DATA Display 128X64 Pixel LCD with backlight Measuring range (in two function modes of Standard mode and through coating mode) Standard mode 0.8 mm-- 300.0 mm in steel depending on the probe. Special request can reach measuring range up to 500mm Through coating mode 2.5 mm – 18.0 mm (Probe...

Brand Name:Gold

Model Number:ZBL-U5600

Place of Origin:Chongqing, China

... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's

Brand Name:iqualitrol

Model Number:UT-260

... flaw detection is the oldest and the most common used instrument. The ultrasonic waves through solid materials have been used to detect hidden cracks, voids, porosity, and other internal discontinuities in metals, composites, plastics, and ceramics.

Brand Name:GTJ

Model Number:GTJ-L800

Place of Origin:China

... the thickness of concrete or other non-ferromagnetic media; in use, the transmitting probe and the receiving probe are placed on the floor respectively. The two opposite test surfaces respectively transmit and receive electromagnetic signals, and the

Brand Name:Raytech

Model Number:RTG-510

Place of Origin:China

... IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01mm ( Less than 100.0 mm ) 0.1mm( over 100 mm ) BULIT-IN

Brand Name:SINOWON

Model Number:TG-200

Place of Origin:DONGGUAN/CHINA

...Non Destructive Testing Machine Coating Thickness Tester with F and NF Measuring Probes Application Description: F Type Magnetic induction: ● Can measure the thickness of non-magnetic coating layers on magnetic substrate ● Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel) NF Type Eddy Current: ● Can measure the thickness of non...

Place of Origin:XIAMEN,china

Brand Name:COBE

...ultrasonic testing + through type eddy current testing system System Introduction COBE persistent in development of innovative nondestructive testing instruments and applications to make your industrial production and industrial safety can be effectively controlled and achieve greater production efficiency and reduce testing costs.COBE's mission is through the provision of reliable non-destructive testing...

Brand Name:Btutest

Model Number:BTU930

Place of Origin:Made in China

Cross Hole Ultrasonic System Two Channels Automatic Concrete Testing Equipment Standard: ASTM D6760-02 Features: ※ newly upgraded wireless cloud transmission function (optional); ※ it integrates six functions of pile, strength, defect, width, depth and ...

Brand Name:iqualitrol

Model Number:iOMC-E

Integrated Built in Probe for Single-hand Operation Coating Thickness Gauge with USB Connection Summary: A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical ...

Model Number:MD-4G

Place of Origin:CHINA

...Non Destructive Testing Equipment 5%~40% Moisture Meter This moisture meter can detect the water composition of a wide range of materials such as wood, bamboo, cotton, tabacco, paper and etc. It has wide measuring range of 5% to 40% moisture level. It has 4 steel sharp probes...

Brand Name:SADT

Model Number:-

Place of Origin:China

...Test Ultrasonic Probe High Precision SGS Certification Ultrasonic Probe Ultrasonic Probe All probes are manufactured & tested according to relevant international standards. Apply on regular geometry & smooth surface; Requires couplant between medium; Design to meet inspection criteria throughout the international standards. Specifications Item Description Itme Description Angle probe...

Brand Name:MITECH

Model Number:MFD660C

Place of Origin:China

Configuration No. Item Qty Remarks Standard config. 1 Main unit 1 With full digital TFT LCD Display 2 Straight Beam Probe 1 4 MHz, Φ10 3 Angle Beam Probe 1 4 MHz, 8 mm×9 mm, 60° 4 Probe Cable 1 Q9-C5,or optional C9- C5 5 Battery Module 1 8.8 amp hour (MB-...

Categories:Eddy Current Testing Equipment

Country/Region:china

Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; The probe is made of imported material, wear-resistant and high ...

Brand Name:HUIWEI

Model Number:RD-2505

Place of Origin:ZHEJIANG, CHINA

... is a widely used non-destructive testing (NDT) method that allows professionals to inspect the internal structures of various materials without causing any damage to them. In NDT, radiograph testing plays a crucial role in assessing the integrity of

Brand Name:SAMYON

Model Number:SY

Place of Origin:CN

Non-Destructive Testing Instrument For Rebar Location And Rebar Corrosion And Concrete Defect Testing Application After the building construction or bridges are finished, the testing unit will test the structure every year to check whether it has some defect inside and whether some potential influence by the concrete. So the testing units will do some general testing...

Brand Name:Zetron

Model Number:MFT-900

Place of Origin:China

... integrity leak detection solutions. compliance fDA 13287 standard: meet one of USP 1207 test methods: non-destructive testing method. FEATURES ・Comply with USP <1207>, ASTM F2338 standards and FDA standards. ・Semi-automatic detection, suitable for

Brand Name:UNICOMP

Model Number:UNC450-B

Place of Origin:China

... Unicomp UNC450 for cylinder,metal castings, aerospace parts non-destructive testing Product Description: The specialized equipment serves as a cornerstone for non-destructive testing across a vast array of materials and products. It is extensively ...

Brand Name:HUATEC

Model Number:H3543HWC-EG

Place of Origin:China

... For Various Fields Such As DR And Non-Destructive Testing H3543HWC-EG is a lightweight wireless detector based on amorphous silicon(a-Si), which is suitable for various fields such as DR and Non-destructive testing. Sensor Receptor Type a-Si Scintillator...

Place of Origin:Jiangsu, China

Brand Name:Chengxin

Model Number:14mm

Non Destructive Testing Accessories Lead Brick Radiation Proof Rectangular Brick Used For Manufacturing Shielding Wall Product Description Lead brick is mainly used for the construction of shielding walls in places or processes where the possibility of ...