odn fiber optic plc splitter

Brand Name:YINGDA

Model Number:1x32 plc splitter

Place of Origin:china

...type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. With the features of small size, wide range of operating wavelength,

Brand Name:Begate

Place of Origin:China

... advantage in broadband access applications has been widespread attention at home and abroad, now already entered large-scale applications. Over the past few decades, passive optical network (PON)

Brand Name:Seacent

Model Number:2x64 type bare device

Place of Origin:Shenzhen,China

... power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.Bare fiber splitter is a kind of ODN product suitable for PON networks that can be

Brand Name:Takfly/OEM

Model Number:DF-PLC-1X16

Place of Origin:Shenzhen, China

...Fiber Optical splitter 0.9mm Spliter PLC 1x4 1x8 1x16 1x32 PLC splitter Fiber Optic PLC Splitter Description: (Planar lightwave circuit) PLC splitter is an optical power distribution device based on the integrated waveguide of quartz plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, It's widely used in PON,ODN...

Brand Name:Fiberall or OEM

Model Number:FA-PLCM1×8SA

Place of Origin:China

...Fiber Optical PLC Splitter For FTTH PON CATV ODN 0.9mm SC/APC The output end of the PLC splitter is arrayed with an optical fiber band (ribbon) and coupled with each output waveguide in the PLC fiber splitter. Each fiber in the optical fiber band is positioned with a V- slot to ensure that all optical waveguides are aligned with the fiber...

Brand Name:OEM or OMC

Model Number:1x8 LGX Cassette Type PLC Splitter

Place of Origin:China

... plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, It’s widely used in PON,ODN,FTTX point to connect between termination device and

Brand Name:CFO

Model Number:SC/APC Panel PLC Splitter

Place of Origin:China

...PLC Splitter Fiber Optical Distribution Box PLC splitter is an optical power distribution device based on the integrated waveguide of quartz plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, It’s widely used in PON,ODN,FTTX point to connect between termination device and central office to achieve the signal splitter...

Brand Name:OPTICKING

Place of Origin:China

...PLC Splitters for PON/ODN Networks FTTH wall mount PLC (Planar Lightwave Circuit) splitter is a type of optical power management device with wall mount package fabricated using silica optical waveguide technology. It is widely used in PON/ODN networks to realize optical signal power splitting with 1xN or 2xN splitting ratio. Opticking provides a series of customized wall mount PLC splitters...

Brand Name:KEXINT

Model Number:PLC-1*2-SC/APC

Place of Origin:SHENZHEN

... power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. MINI type PLC splitter has stronger fiber protection than bare fiber splitter,

Brand Name:SUNET or OEM

Model Number:Steel Tube Type

Place of Origin:Qingdao,China

...optical splitter are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. The 1x8 optical splitter with 1 input and 8 output fibers with an even split ratio across all fibers regardless of input wavelength. some of

Brand Name:hanxin or OEM

Model Number:1*8 cassette type splitter

Place of Origin:Shenzhen ,China

...Fiber Optic PLC Splitter FTTH Optical Splitter Terminal Box FTTH Optical Splitter Terminal Box Insert Card Type 1X8 SC/APC LGX Fiber Optic PLC Splitter The PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter

Brand Name:HG or OEM

Model Number:Mini 1x8 PLC Splitter

Place of Origin:China

...Fiber Optic PLC Splitter SC apc plc splitter 1x8 Steel Tube Type Fiber optical splitter Materials in line with the IEC standard connector Distribution frame in the ODF to achieve sub-line 1. low insertion loss 2. high return loss 3. high isolation 4. low polarization dependent loss Good direction Good interchangeability Powerful anti-environmental change Application Optical Fiber Communication Systems Optical...

Brand Name:OEM

Model Number:PLCM-1*16-0.9-SCA-1.5M

Place of Origin:CHINA

...Fiber Optic PLC Splitter With Green SC Connectors 1x8 Fiber Optic Splitter Mini Module Type With Green SC Connectors PLC (Planar Lightwave Circuit) Splitters are Single-mode splitters with an even split ratio from one input fiber to multiple output fibers. This PLC Splitter is a 1x8, with 1 input and 8 output fibers with an even split ratio across all fibers regardless of input wavelength. PLC Splitters...

Brand Name:Fibery

Model Number:FYCPLC2X8LA

Place of Origin:China

Plc Splitter Module 2x8 Lc/apc Cassette Card Fiber Optic PLC Splitter Description Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. It‘s mainly used for various connection and distribution boxes or network cabinets. Fiber Optic splitter is also called optical splitter

Brand Name:UT-King

Model Number:PLC-C116SU

Place of Origin:China

...optical fiber link. Waveguides are fabricated using lithography onto a silica glass substrate, which allows for routing specific percentages of light. As a result, PLC splitters offer accurate and even splits with minimal loss in an efficient package. It

Brand Name:KELONG

Place of Origin:CHINA

...Fiber Optic PLC Splitter Planar Lightwave Circuit Multimode Fiber Splitter PLC Splitter Same as cable transmission system,optical network system also need signal coupling,branching and distribution,splitters can meet these functions.Splitter is the important device in PON transmission system,splitters can make the input optical signal into multiple output optical...

Brand Name:Sea dragon

Model Number:Optical Fiber PLC Splitter

Place of Origin:Hebei china

... based on quartz substrates of integrated waveguide optical power distribution equipment, similar to coaxial cable transmission systems. The optical network system also needs to be coupled to branch optical signal distribution. Optical fiber splitter is

Brand Name:WRC-1*8 ABS coupler fiber optic plc splitter 2.0mm cable and Plug-in type SC APC PC UPC connector

Model Number:1*8 ABS coupler fiber optic plc splitter 2.0mm cable and Plug-in type SC APC PC UPC connector

Place of Origin:China

... UPC connector Planar optical waveguide Splitter (PLC Splitter) is a planar optical waveguide integrated optical device based on planar optical waveguide.: It can realize the predetermined distribution of light power within the wavelength range of 1260nm ~

Brand Name:Geehe Comm (OEM&ODM)

Model Number:GH-PLC-1X8-006

Place of Origin:China Mainland

...Fiber Optic PLC Splitter 0.9mm Quick Overview: PLC-1/8-E-SM-SC/APC Fiber Optic Splitter, Tube Type, PLC Connector Type: SC/APC Split Type: 1x8 Single Mode Fiber:0.9mm Easy Installation GR-1209/1220-Core Standard Geehe offers a variety of bare fiber type PLC splitters. The bare fiber PLC splitters can be easily placed in a formal joint box or fiber optic splice closures. The bare fiber PLC splitters...

Brand Name:Geehe or OEM

Model Number:Fiber Optic PLC Splitter

Place of Origin:Wuhan, China

...Fiber Optic PLC Splitter Mini Distribution , No Connector 0.25mm Bare Fiber In Ribbon Bare Fiber Steel Tube 1 x 4 PLC Splitter Mini-distribution No Connector Certification and Compliance GR-1209-CORE Requirements for Passive Optical Components. GR-1221-CORE Reliability Assurance Requiremnts for Passive Optical Components. GR-326-CORE Requirements for Single Mode Optical Connectors and Jumpers Assemblies. TIA-604 Fiber Optic...