oil gas choke and kill manifold

Brand Name:Hebei Pantu

Model Number:2 1/16'' 3000psi 5000psi 10000psi 15000psi 20000psi

Place of Origin:China

.... It consists of a set of valves, gauges, pipes, and fittings that allow operators to manage the flow rate of drilling fluids (such as drilling mud, oil, or gas) from the wellbore. Kill Manifold Introduction A kill manifold is a

Brand Name:JC Wellhead

Model Number:2" x 5000 psi Choke and Kill manifold

Place of Origin:China

...Choke and Kill Manifold For Oil Well Flow Control with API 6A Valves The chock manifold and the kill manifold are important well flow control equipment for down-hole operation, The design and the manufacture of the choke and kill manifolds conform to API16C standard. The choke manifold and kill manifold is used to carry out near balance drilling. During drilling, the choke manifold and kill manifold...

Brand Name:HUIFENG

Place of Origin:CHINA

35MPA-140MPA Choke Valve 52-103MM Choke Manifolds Parameters of the product Choke and kill manifolds are important equipment for preventing blowout, controlling pressure changes in oil and gas wells, and ensuring the continuous implementation of ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

...121℃ (Grade B+U) TUBE: Nitrile rubber, resistant to oil, abrasion, acid & alkali. REINFORCEMENT: 2-8 layers of single high strength steel wire spiral. COVER: Neoprene, resistant to oil, abrasion and low temperature, weather proof and anti-aging. ARMORE:

Brand Name:ZZ TOP OIL TOOLS

Model Number:4 1/16" x 5000 psi

Place of Origin:China

...Manifold Choke & Kill Manifold For Well Flow Control The choke manifold is necessary well-control equipment in effectively controlling kill and carrying out pressure controlling for oil and gas well. The equipment can be used to carry out the new technology of balance pressure drilling. Choke manifold can keep oil formation from pollution and increase drilling speed. The manifold can effectively control well blowout. Kill and choke

Brand Name:SHRT

Model Number:Kill Manifold

Place of Origin:SHANGHAI IN CHINA

Kill manifold is a key part in the control devices of oil/gas well,which has the function that,as the drilling string can not be used for normal operation,the kill manifold shall be used to pump drilling fluid into the well so as to control the downhole pressure,one end of the kill manifold shall be connected with the side hole of drilling spool and teh other end shall be connected with the mud pump. Main technical parameters Name Choke manifold

Brand Name:ATO

Model Number:JG-35 YG-35

Place of Origin:CHINA

...choke and kill manifold is a necessary device for successful control on well kick and implementation of oil and gas well pressure control technologies. It is designed, manufactured and inspected in accordance with 16C. Choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components. It is adopted to execute new drilling-well’s technique of balance pressure, which can avoid pollution of oil

Brand Name:TR Solids Control

Model Number:JG-35

Place of Origin:Xi′an, China

... method of mud circulation through the drill pipe is out of control,kill manifold can be directly connected to mud pump to inject mud into wellhead pump,so that control the pressure of oil&gas well. Choke manifold is composed of choke valve, gate valve,

Model Number:2" - 4"

Place of Origin:China

...Choke And Kill Line Hose For Oil Drilling The flexible choke & kill hose can be used for flexible connection between the riser and manifold. It is applicable as connection part when drill platform, semi-submersible drilling vessel or drilling vessel moves relatively and for adjustment of the installation variance of the drilling rig. RECOMMENDED FOR: Flexible line connection in the choke manifold and kill manifold

Brand Name:AHSUNVAL

Model Number:Fig. D606

Place of Origin:CHINA

...Oil and Gas pipelines, 2. Cementing, fracturing,Manifolds and Pipelines,acidizing, testing 3. Crude Oil and Sour Gas,Mud, 4. Water Flood Lines, 5. choke-and-kill lines. 2, APPLICATION: 1. Oil and Gas pipelines, 2. Cementing, fracturing,Manifolds and Pipelines,acidizing, testing 3. Crude Oil and Sour Gas,Mud, 4. Water Flood Lines, 5. choke

Brand Name:ASEEDER

Model Number:Choke beans-0010

Place of Origin:CHINA

... H2 big john choke bean, body Material: 410SS, lined with Tungsten Carbide (C10 or C25) , to protect them from corrosive and abrasive wear. On one side of the choke manifold, calibrated choke beans are used to control flow rate through the fixed choke box.

Brand Name:LETONE

Model Number:LT302 API 16C

Place of Origin:CHINA

...Choke And Kill Hose​ Flexible Choke and Kill Hose is applicable to connection at locations when drill platform, semi-submersible drilling vessel or drilling vessel moves relatively and the installation dimensions of the drill rig subsequently change, and to delivery of oil, gas, mud and other high pressure media (including mainly relief line, blowout control line and choke kill...

Brand Name:CSPPM

Model Number:PPM-T293A

Place of Origin:China

...Gas Oil Pressure Sensor Transducer ■ 4-20 mA, 2-wire Output ■ 0.25% Accuracy ■ Shock & Vibration Resistant ■ Zero & Span Adjustments ■ All-welded Construction Applications ■ Oil & Gas Drilling ■ Mud Pumps / Mud Logging ■ Fracturing ■ Acidizing ■ Cementing ■ Standpipe ■ Stimulation ■ Well Head Measurement ■ Choke & Kill ■ Coiled Tubing Technical Parameters : Tested Media : Wet Soil,Oil...

Brand Name:Zonco

Place of Origin:China

... and are necessary equipment to successfully control the kick and implement the pressure control technology of oil and gas wells. When a well kick or blowout occurs, use the valve in the choke manifold to open and close, control a certain back pressure to

Brand Name:CCSC

Model Number:Flowback manifold

Place of Origin:China

API 6A/16C Plug Valve Manifold/Flowback manifold Plug Valve Manifold - Flowback Manifold is designed and manufactured in accordance with API 6A and API 16C standard and improved from SPM and FMC ULT series plug valves. They are easy for operation and low ...

Brand Name:Royal Way

Model Number:Weco Hammerless Union Seals

Place of Origin:Shanghai, China

What we supply: Hammer union seals from Shanghai Qinuo are precision-engineered to provide dependable sealing performance in demanding oilfield conditions. These seals are widely used in high-pressure flowlines, choke and kill manifolds, drilling mud ...

Brand Name:OED or OEM

Model Number:Customized

Place of Origin:China

... is higher, so widely used in oil fields, mines, exploration and other high temperature and high pressure environment, Carbide wear parts for oil and gas industry, wellhead assembly, such as multi­stage choke manifold, multi­stage blow down processing,

Brand Name:AIPU Solids

Model Number:APMGS1200

Place of Origin:China

...Gas Separator APMGS1200 mud gas separator or Mud Gas Separator, located downstream of the choke manifold, is a vertical vessel used to separate any gas from drilling fluid during a good control situation. Once the gas has been separated, it can pass through the vent line. Alternatively, as long as it’s a safe distance from the rig, it could even be vented. Mud gas separators a special oil