oilfield well drilling tubing pump

Brand Name:Zhongshi

Model Number:TH(B)M

Place of Origin:China

... maximum displacement, so the tubular pump is generally used in not too deep, need large displacement pump infusion of oil Wells. Mainly include ordinary whole bobbin type pump, anti-corrosive wearing the bobbin type pump. For tubing pump, the barrel is

Brand Name:xinwei

Model Number:F-1600

Place of Origin:China

Product Description: One of the standout features of this mud pump is its valve, which meets API 7# standards for quality and performance. This ensures that the valve will operate smoothly and efficiently, even under high pressure and extreme temperatures...

Brand Name:HuiChi (HC)

Model Number:Mud Pump Piston Series

Place of Origin:China

Product Description: The piston for cylinder liner is a key component of the hydraulic end system of the mud pump. The suction and discharge pressure of the mud pump is generated by the reciprocating linear motion of the piston in the cylinder liner. The ...

Brand Name:Bomco/Emsco

Model Number:F1600

Place of Origin:China

Gaomi Eastland Oilwell Machinery Co.,Ltd Module: “I” shaped module, “L” shaped module, suction module, discharge module Spare parts: Upper and lower Valve Guide, Liner Gasket, Piston Rod, Rod Clamp, Valve Cover, Valve Cover Seal, Cylinder head, Cylinder ...

Model Number:RHAC, RHAM, RHBC, RHBM, etc

Place of Origin:China

...Oilfield Subsurface Sucker Rod Pump Tubing Pump For Oil Well Drilling API 11AX Oilfield Subsurface Sucker Rod Pump Tubing Pump For Oil Well Drilling Description of sucker rod pump: The Sucker rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is convenient for the inspection and workover because they can be pulled up and down through the tubing

Brand Name:TR Solids Control

Model Number:TRCB

Place of Origin:Xi'an China

... to the sucker rod directly, it can be pulled out with sucker rod and does not influence the tubing, so the well inspection and workover is more convenient. It can save half times and reduce cost of the pumping test, thus the rod pump is suitable for

Brand Name:Hebei Pantu

Model Number:F-800

Place of Origin:China

... drilling conditions. Built with good rigidity and strong structural integrity, this pump ensures reliable performance during continuous operations. Its robust design supports efficient pressure delivery, making it suitable for various drilling depths and

Brand Name:GLORYTEK

Model Number:F1000

Place of Origin:China

... in oil field and high displacement technology of well drilling with its solid and compact structure, small volume and outstanding operation performance. F Series Drilling Mud Pump has long stroke maintaining operation at lower frequency resulting in

Brand Name:ATO

Place of Origin:CHINA

... API oil drilling mud pump rubber piston assembly for oilfield Mud Pump Parts Mud Pump rubber Piston Assembly The mud pump pistons are strictly manufactured according to API Standard, with high performance in various good drilling environments. The hub...

Brand Name:AIPU

Model Number:APSB

Place of Origin:CHINA

... to the hydraulic energy of the fluids flow. The rotational energy typically comes from an engine or electric motor. Aipu supply pumps driven by 10HP to 100HP, which are popular in drilling mud process. Pumps size are 3x2, 4x3, 5x4, 6x5, 8x6. They will

Place of Origin:china

...drill mud pump china supplier purchasing agent service could be offered. Polaris Product Lines: hydraulic/pneumatic,drilling rig oilfields,engine/tractor/agriculture,marine/offshore,construction/mining/earth-moving machinery fields Other product lines: Top brand excavator hydraulic pump motor replacement OEM MRO gear shaft transimission manufacturer crane hoisting machinery spare China export drilling rig oilfield...

Brand Name:Pangolin

Place of Origin:Hebei China

Oilfield Drilling Jet Mud Mixer Onshore Rig Drilling Jet Mud Mixer In Petroleum Industry Introduction The jet mud mixer is a special equipment for preparing and increasing the weight of the drilling fluid by adding bentonite, stirring, changing the density of the drilling fluid, changing the density, viscosity and dehydration of the drilling fluid. The effect of matching with shear pump...

Place of Origin:Jiangsu,China

Brand Name:xitan

Model Number:BW-250

...Oilfield Drilling Mud Pump For Drilling Rigs Quick Detail: 1. BW-250 mud pump diameter cylinder liner-Φ80mm and Φ65mm. 2. This mud pump needs small driving power. It has large output volume and high pressure. 3. This mud pump is a main device in geological survey. Description: 1.BW250 mud pump is a horizontal two-cylinder reciprocating pump. 2. This piston pump...

Brand Name:BJB

Model Number:NB200

Place of Origin:China

200HP Motor Driven Mud Pump Description The tructure meets API674 and GB/T9234 with higher power load to fit the different siteIts flow rate range is 13-150m³/h with maximum discharge pressure 40Mpa.The fluid is drilling mud or slurry. Application The mud ...

Model Number:J55/K55/N80/L80/P110

Place of Origin:CHINA

.... It is manufactured according to API 5CT standards, and is available in a size of 2 3/8 inches and grade of E-75. It is suitable for a wide range of applications, including drilling, production, and completion. OCTG Tubing is

Brand Name:TR SolidsControl

Model Number:TRJQB Series

Place of Origin:Xi'an,China

...Oilfield Drilling Shear Pump Advanced Mud Shearing Technology for Superior Drilling Performance – TR SolidsControl Product Description The TRJBQ Series Shear Pump by TR SolidsControl is a high-efficiency, heavy-duty solution designed for superior shearing, homogenizing, and mixing of drilling fluids, polymers, bentonite, and other critical additives. Engineered to break down stubborn agglomerations (such as "fish eyes"), this pump

Brand Name:WEATHERFORD, LEWCO, EWCO, GARDNER DENVER, NATIONAL, OILWELL, ELLIS WILLIAM

Model Number:MP-5, MP-8, MP-10, MP-13/16, E-447, E-2200

Place of Origin:CHINA

Product Description: The valve pot of these pumps is compliant with API 7 standards, ensuring that they meet the highest industry standards for quality and performance. This makes them suitable for use in a variety of applications, including oil and water ...

Categories:Mud Pump Fluid End Parts

Country/Region:china

High Flow Rate Mud Pump Fluid Module for Oilfield Drilling Operations *, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, ...

Brand Name:LS

Model Number:3NB-1300

Place of Origin:China

Mud Pump Parts Bi-Metal Liner Used For LS 3NB-1300 Mud Pump Description of Bimetal Liner The inner and outer layers are tightly bound together.The outer 45# steel is wear-resistant and the inner high chromium cast iron is wear-resistant and corrosion-...