partially hydrogenated

Brand Name:SUMAIRUI GAS

Model Number:OSH-100

Place of Origin:SUZHOU, CHINA

... to adsorbent material. The respective force acting between the gas molecules and the adsorbent material depends on the gas component, type of adsorbent material, partial pressure of the gas component and operating temperature. A

Brand Name:Ruideer

Model Number:336/4412/5518

Place of Origin:China

...Partial Pressure Sintering for silicon nitride,aluminum nitride,silicon carbide Vacuum protective atmosphere heat treatment method to the choice of gas filling. When using the partial pressure of heating vacuum heat treatment back filling gas should choose the neutral or inert gases, high purity hydrogen, helium, nitrogen and argon gas, such as common gases, four gas cooling speed from fast to slow, in turn, for hydrogen...

Place of Origin:China

Brand Name:SASPG

Model Number:ZCF-5000/8

Hydrogen storage tank Available volume 50000L Max working pressure 8Bar Insulation method Vacuum powder Empty Tank weight 4300kg Medium LN2 Main body material 0Cr18Ni9/Q235-B Partial List of Vacuum Cryogenic Storage Tanks Model Storage Medium Effective ...

Brand Name:WHATET

Model Number:WH-305

Place of Origin:CHINA

... WH-305 desulfurization agent is used to remove hydrogen sulfide and partial organic sulfur from natural gas, synthetic gas, refinery gas, naphtha oil and etc. It was widely used in hydrogen unit, synthetic ammonia purification system and petroleum ...

Brand Name:Hydeb

Model Number:HDR-2000

Place of Origin:CHINA

... through the graphite rotor. The rotor of the refiner can effectively break up the inert gas into small bubbles. The bubbles are evenly dispersed and floated in the molten aluminum. The hydrogen partial pressure in the molten aluminum is higher than

Brand Name:Yushun

Model Number:Customized

Place of Origin:Jiangsu, China

... full of blowing argon stirring, lower the partial pressure of the gas impurities in the molten steel, thus reducing hydrogen, oxygen, nitrogen content in liquid steel, improve the quality of molten steel, blowing oxygen into the molten steel in vacuum

Brand Name:IRIS

Place of Origin:China

...furnace 3.Vacuum to 10mpa 4.Add voltage 400-600V 5.When the workpiece is heated to 100℃, add nitrogen and hydrogen (the amount of gas introduced is 801/h), and then rise the temperature to 520℃ 6.Nitrogen atoms partially penetrate into the workpiece