passive direct attach copper cable

Brand Name:Hilink

Model Number:QSFP-4SFP10G-CUxx

Place of Origin:Guangdong, China

... are compliant with the SFF-8436 specifications. SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length(up to 7m)

Brand Name:OLKOPTO

Model Number:OLSP01XC-CN1

Place of Origin:China

...Passive Direct Attach Copper Cable Juniper Compatible Juniper EX-SFP-10GE-DAC-1M Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable General Description SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable...

Brand Name:REALSEA

Model Number:10G SFP+ DAC Cable 1M

Place of Origin:China

...Passive Direct Attach Copper Cable SFP-10G-CU1M In Stock Product Description SFP+Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ cables offers a low cost SFP+ solution. SFP+ directly attached twinax cable...

Brand Name:NUFIBER

Model Number:10G-DAC-3M

Place of Origin:China

... Ethernet (10GbE) network applications, using an enhanced SFP+ connector to send 10Gbps data through one paired transmitters and receivers over a thin twinax cable. They are compliant with electrical standards SFF-8431, SFF-8083 and

Brand Name:ANC or customized

Model Number:25G SFP28 DAC

Place of Origin:China

...Cable 25GBASE-CR SFP28 to SFP28 Passive Direct Attach Copper Cable Description 25G SFP28 DAC cable manufactured by ANC International Co., Limited is a hot-swappable passive direct attach copper cable assembly (also known as Twinax Cable or DAC) with SFP28 modules at both ends. It is developed specifically as a cost-effective and lower-power alternative to 25Gb SFP28 optics and Active Optical Cables...

Brand Name:Aixton

Model Number:AXT-DAC

Place of Origin:CHINA

...Direct Attach Cable Passive Copper Cable 10G SFP+ DAC Cablej The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable...

Brand Name:Sourcelight or OEM

Model Number:40G QSFP+ TO 4SFP+ DAC

Place of Origin:Shenzhen,China

... interconnects . The Hybrid cables are compliant with SFF-8436 and SFF-8431 specifications. It is offer a low power consumption,short reach interconnect applications. The cable each lane is capable of transmitting data at rates up to 10Gb/s, providing an

Brand Name:E-link

Model Number:LNK-DP1824-3

Place of Origin:China

...Passive Copper Cables (LNK-DP7D30-XXX) are designed to provide high performance and cost effective I/O solutions for various applications such as 100G LAN, HPC, and SAN. These cables are compliant with the SFF-8436 standard and offer low power consumption for short reach interconnect applications. Each lane of the cable...

Brand Name:SHKE

Model Number:10G SFP+DAC

Place of Origin:China

... Single 3.3V power supply ● RoHS compliant ● Cost-effective copper solution ● Lowest total system power solution ● Lowest total system EMI solution ● Optimized design for Signal Integrity Application: ● 10G ...

Brand Name:Generic

Model Number:SFP-H25G-CU

Place of Origin:Shenzhen, China

...Passive Direct Attach Copper Twinax Cable For Cisco SFP-H25G-CU Description Of Cisco SFP-H25G-CU Compatible Passive Direct Attach Copper Twinax Cables This Cisco SFP-H25G-CU Compatible Copper Twinax Cable provides a high-speed, cost-effective alternative to establish a 25Gigabit short-reach link between SFP28 25G ports of switches within racks and across adjacent racks. This Cisco SFP-H25G-CU Compatible direct attach copper

Categories:DAC Direct Attach Cable

Country/Region:china

...-X02AA Compatible 2.5m 10G SFP+ Twinax Copper Cable (SFP+ to SFP+ DAC Cable, Passive AWG30 2.5m) Product Details Mellanox Compatible MCP21J1-X02AA Vendor Name FIBER MALL Connector SFP+ to SFP+ Max Data Rate 10Gbps Cable Length 2.5m (8.2ft) AWG AWG 30 ...

Brand Name:Top-Trans

Model Number:QSFP-DAC-5M

Place of Origin:China

...-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and

Model Number:ZK-QSFP-40GDC-CR

Place of Origin:China

40G QSFP+ to QSFP+ DAC 3M passive copper cables Twinax Direct Attach Copper Cables Features 4-Channel Full-Duplex Passive Copper Cable Transceiver Support for multi-gigabit data rates: 1Gb/s - 10.3Gb/s (per channel) Maximum aggregate data rate: 41.2Gb/s ...

Brand Name:E-link

Model Number:LNK-DP7D30-1

Place of Origin:China

... SAN Data Center Network 2. Features QSFP28 conforms to the Small Form Factor SFF-8665 4-Channel Full-Duplex Passive Copper Cable Transceiver Support for multi-gigabit data rates :25.78Gb/s (per channel) Maximum aggregate data rate:

Brand Name:Coloroptic

Model Number:C-DCS10T10

Place of Origin:China

...Direct Attach Copper Passive Cable SFP+ 10G To SFP+ 10G For 10G Fiber Channel Application Color Optic’s 10G SFP+ passive cable uses shielded high-speed differential cables, compliant with 10 Gigabit Ethernet standards and SFP Multi-Source Agreement (MSA) standards, supports 10G trans- mission rates, and is backward compatible with 1G rates.SFP+ passive cable...

Brand Name:UNIFIBER-OEM

Model Number:40G QSFP+ to 4*SFP+

Place of Origin:CHINA

...Passive Direct Attach Copper Twinax Cable QSFP+ copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. These cables...

Brand Name:Cisco

Model Number:QSFP-4SFP10G-CU1M

Place of Origin:USA

..., SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m). Features •40G QSFP+ Compliant with SFF- 8436. •SFP+ Compliant with SFF-8431,

Brand Name:UTOPTEK

Model Number:QSFP28-100G-PCU1M

Place of Origin:China

... Form Factor SFF-8665 • 4-Channel Full-Duplex Passive Copper Cable Transceiver • Maximum aggregate data rate: 100Gb/s (4 x 25.78Gb/s) • Copper link length up to 3m (passive limiting) • High-Density QSFP 38-PIN Connector • Power Supply :+3.3V •

Brand Name:Linkopto , or OEM

Model Number:ESPCAP92-324C8

Place of Origin:China

... for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and

Brand Name:Mray

Model Number:SFP-10G-DAC1M

Place of Origin:Shenzhen, China

...Passive Direct Attach Copper Cable 1M Description Miray's SFP+ Direct Attach Cables are compliant with the SFF-8436 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m). SFP+ Passive Copper Direct Attach Cables...