pipe surface crack flaw detector

Brand Name:HUATEC

Model Number:HEF-301

Place of Origin:China

HEF-301 Eddy Current Pipe Surface Crack Flaw Detector It has been proved by research that, operate smart keyboards with thumb is much easier than with other fingers because it has less joints. HEF-301 takes this advantage to realize one-finger operation...

Brand Name:TMTeck

Model Number:TMD-305

Place of Origin:China

...Crack Flaw Detector TMD-305 Easy to operate, fast, low-cost, lightweight, suitable for high-altitude work and underwater inspections. No need for polishing. Explosion-proof and does not produce sparks. No chemical reagents are needed to remove the surface ...

Brand Name:SADT

Place of Origin:China

...Flaw Test Ultrasonic Probe High Precision SGS Certification Ultrasonic Probe All probes are manufactured & tested according to relevant international standards. Apply on regular geometry & smooth surface; Requires couplant between medium; Design to meet inspection criteria throughout the international standards. Ultrasonic probe for flaw detector...

Place of Origin:XIAMEN,china

Brand Name:COBE

COBE -24ET Digital Multi-channel Eddy Current Flaw Detector Main Technical Data 1) Frequency range: 50 Hz -- 10 MHz 2) Phase: 0 -- 359 ° continuous-tuning, step: 1 deg 3) Gain: 0 -- 99.0 dB continuous-tuning, step: 0.5dB 4) Display : Impedance, time-base...

Brand Name:Mitech

Model Number:Guide Wave Probe

Place of Origin:China,Beijing

Mitech Customize and Special Probe Guide Wave Probe Overview Mitech ultrasonic Angle Beam probe, choice superior performance of the piezoelectric material chip, damping block and protective film. Strong penetration, high signal to noise ratio, has good ...

Brand Name:HUATEC

Model Number:HCDX-Y7L

Place of Origin:Beijing

...Surface Crack Testing HCDX-Y7L Magnetic Flaw Detection Method,Magnetic Particle Flaw Detection Magnetic Flaw Detector,Magnetic Flaw Detect Defect examples: Defect location: Inclusions Seams Surface and subsurface Ideal for: Fatigue cracks Shrink cracks Tears Laps Field testing pot inspections Welding slag Grinding cracks In-service inspections Quenching cracks...

Brand Name:Suzhou Desisen (DSS) Electronics

Model Number:FET-HY

Place of Origin:china

...detecting surface and near-surface defects in metals. It utilizes the principle of electromagnetic induction to generate eddy currents in the test material, allowing for precise evaluation of material ...

Brand Name:HUIWEI

Model Number:HW-M75

Place of Origin:CHINA

... materials. It effectively detects surface and near-surface defects with high sensitivity. It comes with a replaceable internal battery, effectively extending inspection time and requiring no external wiring. The compact ...

Place of Origin:China

Brand Name:Raytech

Model Number:RFD710

...flaw detector, Digital UT flaw detector RFD710 This instrument can be used to detect various defects inside the material, such as steel, copper, aluminum, hard alloy, casting, organic glass, composite materials, and welding and so on, which can effectively detect porosity, cracks, porosity, slag inclusion, incomplete welding defects, fully functional and practical, is a portable digital ultrasonic flaw detector

Brand Name:QingCheng AE

Model Number:SUB100

Place of Origin:CHINA

...Flaw Detector SUB100 portable ultrasonic flaw detector series is specially designed for personnel use on non-destructive testing, which could testing,position,evaluation and diagnosis of various flaws. It can easily and accurately conduct non-destructive testing on welding defects, cracks...

Place of Origin:CHINA

Brand Name:RSTAR

Model Number:LK

...flaw detectors The mobile X-ray flaw detectors can be used in non destructive testing ( NDT )of casting parts, welded parts and other the parts made of metal and non-metal materials, in purpose to find inner defects such as slag inclusion , crack , pinhole, incomplete penetration, incomplete fusion and so on. Mobile X-ray flaw detectors...

Brand Name:UNICOMP

Model Number:UNC PORTABLE

Place of Origin:China

... examination for nonmetallic, light metal, casting, various alloys and pressure vessels etc, mainly detecting weld defects ,such as crack, blowhole, entrapped slag, incomplete fusion ,blowhole,bubble etc ,also using for shipbuilding ,airplane and

Brand Name:LEEB

Model Number:Leeb620

Place of Origin:China

... supply: AC ● Small volume, light weight, large lifting force, and adaptable joint. ● Detecting of the weld bead, steel pipe, pressure vessel, and the parts with complicated figure. ● This model has applied for national patent technology.

Brand Name:SINOWON

Model Number:Ultra-F1

Place of Origin:DONGGUAN/CHINA

...Flaw Detector has the features of quick and non-destructive testing, high precision and easy to carry. It can test,locate,assess and diagnose a variety of detects within the work piece such as crack, weld, porosity, blister, inclusion and folding. Digital Ultrasonic Flaw Detector...

Place of Origin:China

Brand Name:China Coal

... ultrasonic detector Applications: ultrasonic transmission method of pile, continuous wall integrity rapid detection; ultrasonic - rebound combined method of concrete compressive strength; ultrasonic method to detect cracks in the depth of concrete, not

Brand Name:iqualitrol

Model Number:UT-282

... flaw detection waves through solid materials have been used to detect hidden cracks, voids, porosity, and other internal discontinuities in metals, composites, plastics, and ceramics. High frequency sound waves reflect from flaws in predictable ways,

Brand Name:AJR

Model Number:BS1000

.... BS-1000 also can use as part of other inspect system, for can provide real-time image. BS-1000 B scan inspect imaging system realizes PE pipe’s

Brand Name:GTJ

Model Number:GTJ-U600

Place of Origin:China

GTJ-U600 full digital ultrasonic flaw detector Usage overview The GTJ-U600 all-digital ultrasonic flaw detector can quickly and flawlessly and accurately detect various defects (cracks, inclusions, pores, etc.) inside the workpiece. The product is unique...

Place of Origin:China

Brand Name:chinacoal

Product Introduction ZM-U600 is used to examine the internal defects of various materials such as steel, copper, aluminum, hard alloys, castings, polymethyl methacrylate, composite materials, weld joints, etc. This device can detect defects such as holes, ...

Brand Name:Cosco Steel

Model Number:St52,St35.8,St45-8,St52.4,ST35-ST52 etc

Place of Origin:China

...(+C), BKS 5) Size: OD3-60mm. WT0.5-8mmMax length 12meters. 6)Technique:Cold Drawn 7) All steel tube can test Ultrasonic flaw detector, Eddy current flaw detector, depend on customers requirement 8)