pneumatic push in l fitting

Brand Name:BRANDO

Model Number:BCKH-Z

Place of Origin:Ningbo, China

... in achieved by pushing the hose into the fitting. To disconnect, the releasing collet must be pressed down. The most suitable hose material for push-in fittings is polyamide. Quick and easy to use, the push-in fittings can be re-used thousands of

Brand Name:NBSANMINSE

Model Number:POC

Place of Origin:CHINA

... Pipe Thread). 3. Each and every pcs was tested at 10kgs/cm2. 4. Thread with PTFE coating which can seal directly without any other seal material. 1.One – Touch tube fittings are used in pneumatics piping 2.The tube fittings come in a wide variety of

Brand Name:DZSICO

Model Number:SSPL-G

Place of Origin:CHINA

...SS316L Pneumatic Push To Connect Fittings # Inox SS316L Pneumatic Push To Connect Fittings Properties DZ stainless steel push-in fittings are manufactured of acid-resistant, corrosion-free stainless steel of highest material quality.The fitting is ...

Brand Name:SONGQIAO

Model Number:KH

Place of Origin:Ningbo,China(Mainland)

KH Push-In Type, Camozzi Type, Pneumatic Fittings in Brass, Nickle plated

Brand Name:Airwolf

Model Number:TKC-PCF8-01

Place of Origin:CHINA

Internal threaded joint TKC-PCF8-01 Air compressor 1/8 inch Pneumatic fittings​​ Pneumatic quick joint is a kind of fast joint mainly used for air piping and pneumatic tools. When the pipe connection or disconnected joint is not linked without tools, the ...

Place of Origin:Ningbo China(Mainland)

Brand Name:FLUIDAC or OEM

Model Number:RPC8x6-G02

Pneumatic Tube Fittings Brass One Touch Push-on Tube Fittings Nickle Plated One touch fully brass material rapid push-on fitting straight,elbow,tee,branch tee,triple,banjo,reduction type,flow regulating type,swivel type,bulkhead type,tube size 4mm~16mm,inch size 5/32”~1/2”,thread 1/8”~1/2” PT,G,NPT,Metric thread,e.g RPC8x6-G02 Maximum working pressure 2.0Mpa Quick Detail: * one touch fully brass material Rapid push-on fitting...

Brand Name:Sewaly

Place of Origin:China

Model Number:301L, 304N, 410, 204C3, 316L, 420J1, 321, 410S, 410L, 309S, 304, 439, 304L, 305

1/8 3/4 BSPT BSPP NPT Male Thread Pneumatic Push In Air Pipe Tube Fittings Stainless Steel Pneumatic Air Fittings *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: ...

Brand Name:PRIUS,XINYI or OEM

Model Number:PL-C

Place of Origin:Ningbo,China

PL - C Male Elbow SMC type Mini Size of Push - in Tube Fitting with O ring One touch quick push-in fitting straight,elbow,tee,branch tee,plug,splicer,triple,banjo,reduction type,flow regulating type,swivel type,stop type,check type,bulkhead type,tube size ...

Brand Name:SMC

Model Number:KQG2L08-02S

Place of Origin:China

SMC KQG2L08-02S Threaded Pneumatic Hose Fittings Tubing O.D. Ø8 Product Description: Elbow Push to Connect Fittings, SS316 (KQG2L08-02S) KQG2L Series Part Number: KQG2L08-02S SMC One-Touch fitting. Features · Compact and lightweight. · Grease-free. · Can ...

Brand Name:carterberg

Model Number:PKG

Place of Origin:China

Pneumatic Push-in Fittings Direct One Touch Change Size Reducing Tube Connector Plastic pneumatic fitting One-touch joints used in pneumatic piping Used for a wide variety of nodes to meet all needs Easy to connect/disconnect tube by one touch PC type is useful for piping in confined space. given its six-angle wrench processing inside Eilliptical sleeve makes it possible to aplly and remove the tube easily in confined space Fittings...

Brand Name:zhengxin

Model Number:DN15

Place of Origin:china

Stainless Steel Pneumatic Push In Fittings Size DN15-DN100 Material Stainless steel 304/ 304L/316/316L/201 Working Pressure 2Mpa Certification CE , ISO9001 Standard DIN , JIS , GB , ANSI Seal Ring EPDM black , FKM green ,NBR Yellow (High temperature) ...

Brand Name:DOPOW

Place of Origin:Yueqing China

Pneumatic Systems Blue Hoses And Fittings Dot Push In Fittings Perfect Sealing 1. Once be inserted,the tube would not easily loose; 2. With Hex type,convenient to installation even the narrow place; 3. All the taper pipe threads are ...

Brand Name:Jetacon

Model Number:Fitting001

Place of Origin:China Mainland

6 Sizes Pneumatic Quick Fittings Type : 4mm to 4mm, 5mm to 5mm, 6mm to 6mm, 8mm to 8mm, 10mm to 10mm, 12mm to 12mm ( Straight ) Material : Plastic, Brass Nickle, Iron Screw Clamp fitting.

Brand Name:Jetacon

Model Number:Fitting001

Place of Origin:China Mainland

6 Sizes Pneumatic Quick Fittings Type : 4mm to 4mm, 5mm to 5mm, 6mm to 6mm, 8mm to 8mm, 10mm to 10mm, 12mm to 12mm ( Straight ) Material : Plastic, Brass Nickle, Iron Screw Clamp fitting.

Brand Name:Jetacon

Model Number:Fitting001

Place of Origin:China Mainland

6 Sizes Pneumatic Quick Fittings Type : 4mm to 4mm, 5mm to 5mm, 6mm to 6mm, 8mm to 8mm, 10mm to 10mm, 12mm to 12mm ( Straight ) Material : Plastic, Brass Nickle, Iron Screw Clamp fitting.

Brand Name:Jetacon

Model Number:Fitting001

Place of Origin:China Mainland

6 Sizes Pneumatic Quick Fittings Type : 4mm to 4mm, 5mm to 5mm, 6mm to 6mm, 8mm to 8mm, 10mm to 10mm, 12mm to 12mm ( Straight ) Material : Plastic, Brass Nickle, Iron Screw Clamp fitting.

Place of Origin:Zhejiang, China

Brand Name:kampa

Brand Name:ZIQUN

Model Number:polishing, stainless steel, Water wash

Place of Origin:Guangzhou, China

...PE.PU/Nylon and Polyure Metal Air Compressor Quick connector pneumatic Push in Fittings Pneumatic fittings are used in pneumatic piping. The tube fittings come in a wide variety of models to meet all your needs in pneumatic piping. Even after installation,

Brand Name:TOBO/TPCO/TISCO/VALIN/METAL

Model Number:1.4835 Stainless Steel Seamless Pipe

Place of Origin:China/Japan/Germany

304L One Touch Elbow Push In To Connect Pneumatic Fittings Pneumatic Stainless steel 90 Right Angle Joint Overview Quick Details Condition: New Warranty: 1.5 years Applicable Industries: Hotels, ...

Brand Name:QPE

Model Number:MPL

Place of Origin:CHINA

Nickel Plated Brass Male Stud Swivel Elbow Metal Pneumatic Push-In Fittings Features 1. Connection and disconnection of the tube can be repeated several times and is performed with one hand, without using of tools. 2. Nickel-plated brass bodies ensure ...