polycarbonate mfi mfr

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-BPV

... minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...MFI MFR Testing Equipment Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR...

Brand Name:JHH

Model Number:XNR-400A

Place of Origin:Beijing, China

...be used to test the melt flow rate(MFR) figures of all kinds of plastic and resin in the viscous flow state. It is not only suitable for the high melting temperature engineering plastics of polycarbonate, polyarylsulfone , fluorine plastic and nylon but

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

..., POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. ​It's is a high precise melt testing instruments for the measurement of melt flow rate (MFR)/(MI) and

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Model Number:LR-A001-D

Place of Origin:China

Brand Name:Lonroy

...MFI Test Equipment Product introduction This tester for high precision automatic melt flow rate instrument, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate...

Brand Name:lixian

Model Number:HZ-1706A

Place of Origin:China

..., fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. To meet the standard: The machine designed and manufactured in accordance with the

Brand Name:SHC

Model Number:SC-XZ

Place of Origin:China

MFR And MVR Mfi Melt Flow Index Test Equipment Melt Flow Indexer Product Specifications: Model No SC-MI-400 Machine ...

Brand Name:LB

Model Number:MFR

Place of Origin:China

... MVR and MFR Tester is suitable for testing fluorine plastic, nylon and other engineering plastics, it is also used to test polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin, polycarbonate and other plastics.

Brand Name:AI

Model Number:MFR

Place of Origin:China

... and other engineering plastics, it is also used to test polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin, polycarbonate and other plastics. Features: PLC control, LCD display, following parameters will be

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

...MFR MVR Thermoplastics ISO 1133 ASTM D1238 ISO 1133 Vs. ASTM D1238 ISO and ASTM offer their standards for purchase at their respective websites. In the world of plastics, melt flow index measures the output rate -- or flow -- that occurs in natural polymer or masterbatch over the course of 10 minutes when a piston applies a fixed amount of pressure at 190 degrees Celsius. Knowing the MFI...

Brand Name:Sinof

Model Number:SF-F22FP

...MFR 1.5-2.5 Product Description This grade is prepared by VDF suspension polymerization. The pellet is well-suited as a good fishing line material. Technical Properties Item unit Test Method SF-F22FP Appearance / 　 White pellet Molecular Weight 　 GPC,DMF 430,000 Intrinsic viscosity Dl/g DMAC 1.25-1.35 MW distribution 　 GPC,DMF 1.8-2.3 MFI...

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Brand Name:AISRY

Model Number:ASR-5605

Place of Origin:China

Melt Flow Index Tester Melt Flow Testing Machine Application: It can be used for the determination of melt flow rate and melt density of various plastics such as polyethylene,polypropylene,polystyrene,ABS resin,fiber resin,acrylicester polycarbonate and ...

Brand Name:Ecoplas

Model Number:Black Desiccant

Place of Origin:Guangdong, China

...(Can be customized) Compatibility PE/PP/LLDPE/HDPE/LDPE/ABS/PS/PA/PVC/EVA MFI/MFR(190ºC/21.6KG) 35-50g/10min Density(g/m³) 1.5--1.75+/-0.1g/m³ Pellet size of Masterbatch 2.5 micron Recommended Diagnose 2%-5% ...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

... of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also...

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

... plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature. Engineering plastics such as plastics