polymers fluid applied roofing membrane

Brand Name:JOABOA TECH

Model Number:MAC

Place of Origin:CHINA

...Membrane Series Bondsure® MAC HDPE Non-asphalt Macromolecule Pre Applied Waterproofing Membrane is a type of high end pre-applied composite waterproof coiled material, dedicated to basement slab waterproofing project, composed of high polymer material, polymer adhesive(not asphalt base) and granular layer, which can be closely bonded with post-poured concrete, thus to eliminate the fluid...

Brand Name:HAOBANG

Model Number:1.2mmEpdm Waterproofing Membrane

Place of Origin:Shandong,China

... EPDM (OP) rubber waterproofing membrane is an advanced polymer alloy, engineered for superior performance. It is formulated with high-purity synthetic polymers, premium fillers, and a stabilizing system that includes plasticizers, anti-aging agents, and

Brand Name:TarsMaterial

Model Number:PVC10

Place of Origin:Made in China

...other initiators; or under the action of light and heat according to the mechanism of free radical polymerization aggregated polymers. Vinyl chloride homopolymers and vinyl chloride copolymers are collectively referred to as vinyl chloride resins. PVC is

Brand Name:JIURUNFA

Model Number:RW-1108

Place of Origin:Shandong China

Application in the Construction Industry Single-component waterproof acrylic emulsion is a high-performance water-based waterproof material widely used in the construction industry. It is suitable for waterproofing applications in roofs, exterior walls, ...

Brand Name:Skypro

Model Number:SK3001

Place of Origin:China

... stability ,strong adapting ability to the shrinkage deformation and cracking 3, High and low temperature resistance performance, SBS is applied to the low temperature environmental building, while APP is suitable for the high temperature environment. 4,

Place of Origin:Shanghai, China

Brand Name:Upass

Model Number:SDM

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{width:750px}#...

Brand Name:MM-Tech

Model Number:SWT-WP2

Place of Origin:Hebei, China

...used for roof welding of polymer waterproof membranes such as PVC, TPO, CPE, EPDM, etc. SWT-WP2 is a professional hot air welding equipment mainly used for roof welding of polymer waterproof membranes, such as PVC, TPO, CPE and EPDM. The ...

Brand Name:Dayang

Model Number:DY2024-MS10-183

Place of Origin:China

...-thinking construction forms of the 21st century. These structures break away from the rigid, linear styles of traditional architecture, offering a fluid, dynamic design that is both visually striking and inspiring. With their smooth, elegant curves and

Brand Name:HaiKe

Model Number:HKRW10

Place of Origin:Chongqing,China

Color Steel Tile Roof Waterproof Membrane National Standard Polymer Modified Asphalt Self-Adhesive Specification item value Warranty 5 years After-sale Service Online technical support, Free ...

Brand Name:SDN

Model Number:SDN Liquid treatment - Ultrafiltration Membrane System

Place of Origin:Chengdu, Sichuan

...size range of 0.001~0.02 microns. Applying appropriate pressure on one side of the membrane, the solvent and some low molecular weight solutes in the solution penetrate from the small pores of the ultrafiltration membrane to the other side of the membrane,

Brand Name:JM

Model Number:4040-P-RO

Place of Origin:CHINA

...: 2400 GPD 99.1% 150 PSI 10.3 Bar TYPE: Configuration: Reverse Osmosis Spira Membrane Polymer: Composite Polyamide Membrane O Ring: EPDM APPLICATION DATA: Maximum applied pressure: 600 PSI (4.14 MPa); Maximum power flow: 75.0 GPM (17.0 m3 / h)

Brand Name:Keensen or OEM

Model Number:SW-8040HF

Place of Origin:China

... Polymer: Composite Polyamide Membrane Active Area:400 ft2 Feed Spacer Thickness:28mil Application Data Maximum Applied Pressure: 1200 psi (8.3 MPa) Maximum Chlorine Concentration: < 0.1 mg/L Maximum Operating Temperature: 113° F (45°C) pH Range of

Brand Name:HJ

Model Number:Customized

Place of Origin:Guangdong, China (Mainland)

...Membrane Purification Equipment Technical Description: Ultra-filtration membrane carry out separation of physical interception screening, membrane separation technology is taking pressure as the propelling force, within 0.005-0.01μm accuracy removing particles, colloids, bacteria, heat and organic polymer substance in water effectively. Widely apply

Brand Name:WINTEAM

Model Number:M serise

Place of Origin:CHINA

... with a relatively uniform pore size distribution of penetrating micropores. The porosity is as high as about 80%. The microporous membrane is made of a polymer chemical material, and the pore-forming additive is specially treated and applied to the

Brand Name:Yuanjin

Model Number:YJ-TUF-120

Place of Origin:Chengdu, Sichuan

... with special selective separation function, which can separate the fluid into two parts that are not connected, so that one or several substances can pass through and separate other substances. Membrane separation technology has been widely used in

Brand Name:BAGPLASTICS@GMAIL.COM

Model Number:WHATSAPP:+8613780964661

Place of Origin:CHINA

Geomembrane is a kind of waterproof material or seepage material with basic raw material of high molecular polymer and produce with blow molding. And it is also called waterproof material or waterproof board, pond liner, impermeable membrane . According...

Place of Origin:China

Brand Name:Prochema

...roof film hylene ethylene copolymer, is a kind of fluorinated polymer type thermoplastic material, is a man-made high strength fluoropolymer, ETFE film forming material directly by the material.ETFE membrane material has good durability, easy clean and stability, is a typical kind of membrane...

Place of Origin:China

Brand Name:Hengquan

Model Number:0.2 - 3.0 MM

... membranes used in conjunction with rocks or earth to block fluid migration in man-made structures. These geomembranes are usually made of synthetic polymers in sheets ranging from 0.2 to 2.0 mm thick. Geomembranes are made of various materials such as

Brand Name:SFX

Model Number:SFXG

Place of Origin:Su Zhou, China

...Membrane Nitrogen Generator For Medical And Chemistry Product Description: Polymer membrane material is the core material of this technology. When pressure is applied, nitrogen can pass quickly, while another gas is difficult to pass through the membrane.Membrane materials is a kind of hollow fibers with high surface area to bring the high processing rates for high bolometric gas. The membrane...