polystel 6 hardened welding rods

Brand Name:WL-ALLOTECH

Model Number:stellite 1 rod

Place of Origin:China

Stellite 1 ERCoCr-C POLYSTEL 1 Cobalt Welding Rod Hard Facing Rod Engine Valve Pump Sleeves Product Description WL-Co1 is a hardfacing alloy possessing excellent abrasion and corrosion resistance for applications such as pump sleeves, rotary seal rings, ...

Brand Name:KAIXIN

Model Number:KX-Alloy Cr-2

Place of Origin:China

..., has high strength, good toughness and corrosion resistance at high and low temperatures at 700℃. The supply state may be solution treatment or precipitation hardening state. Used for welding INCONEL X750,

Brand Name:Yutai

Model Number:201,304,309S,310S,316,316L,etc

Place of Origin:China

... is regularly used to produce a wide variety of metal parts, products and components. It has good ductility in the annealed condition but is capable of being hardened up to Rockwell Hardness 50HRC, the highest hardness of the 12 per cent chromium grades.

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:Various

Place of Origin:Hunan, China

Metal Welding Rod Tungsten Carbide Rods With High Shock Resistance End mills,reamers and gravers are recommended. Excellent performance for high speed cutting. Suitable for cutting hardened steel, aluminum alloy and Titanium alloy. We provide custom-made, ...

Brand Name:ROSCHEN

Model Number:3 1/2

Place of Origin:CHINA

Mayhew Junior Friction Welded Drill Rods 3 1/2 inch with Mayhew Regular Pin 2-3/8" 10 feet length Description . ACCURACY: Blueprint drawings are sent before order placement to guarantee the customer receives the exact product. For custom orders, physical ...

Brand Name:HY

Place of Origin:CHINA

CK45 Welding Hard Chromed Hydraulic Cylinder Piston Rod Detailed Product Description 1. Hydraulic piston rod manufacturer 2. Material: CK45, ST52, 20MnV6, 42CrMo4, 40Cr 3. Ground and chrome plated 4. All certificate related with material heat treatment...

Brand Name:KonDaSin

Model Number:76mm/89mm/114mm

Place of Origin:china

Drill Rod specification Specification Screw Steel Grade Weight Kg 76mm×5.5mm×3m 2-3/8REG N80 33 76mm×4mm×3m 2-3/8REG S135 26 89mm×6.5mm×3m 2-3/8REG N80 47

Brand Name:CUBERYLLIUM

Model Number:EN CuBe1.7

Place of Origin:China

...as required State: TM01 Mill Hardened Typical Applications And Characteristics of EN CuBe1.7 Copper Alloys: Typical uses: bellows, bourdon tubing, diaphragms, fuse clips, fasteners, lock washers, springs, switch parts, roll pins, valves, welding equipment.

Place of Origin:China

Brand Name:GY

Model Number:GY-CNC1000

...Hardening Machine Tools for shaft,steel rod,gear Introduction: Induction hardening machine tools are used together with high and medium or super-audio frequency heating devices. For the purpose of conducting heat treatment of work pieces based on their own specificity the hardening equipment falls into: Hardening type, annealing type, tempering type, quenching type, welding and thermoforming type etc. Hardening...

Brand Name:NADONG

Model Number:304

Place of Origin:CHINA

...Rod Bar 2mm 3mm 6mm Metal Rod 1008 is a high-quality carbon structural steel. It is a very soft carbon steel with low strength and hardness, but extremely high toughness and plasticity. It has good cold working properties and welding properties such as deep drawing, drawing, bending and upsetting. However, there is aging sensitivity, and the hardenability and hardenability...

Brand Name:CHANGYU

Model Number:2A12

Place of Origin:China

... and it has a tendency to form intergranular cracks when using gas welding and argon arc welding in annealing, quenching and hot state. The alloy is quenched. After quenching and cold-working hardening, its machinability is good, but it is not good in the

Brand Name:Daway

Model Number:630, 17-4PH

Place of Origin:China

...Welding Wires 17-4PH Stainless Steel Wires, Rods ER630 for welding precipitation hardened stainless steels, heat treatment of material will obtain higher strength and greatly influence mechanical properties. Typical Applications Hydraulic Equipment Components Impellers Pump Shafts Welding 17-4 PH stainless steels Specification AWS A5.9/A5.9M, ISO 14343 welding consumables, wire electrodes, strip electrodes, wires and rods

Brand Name:DP Steel

Model Number:317L

Place of Origin:Jiangsu，CHINA

...Rod Bar Round Square 317L For Architectural Decoration Stainless steel grade 317L is a low carbon version of grade 317 stainless steel. It has the same high strength and corrosion resistance as 317 steel but can produce stronger welds due to the low carbon content. Machining stainless steel grade 317L requires low speeds and constant feeds to reduce its tendency to work harden...

Brand Name:HUONA

Model Number:Inconel 718

Place of Origin:CHINA

... yield, tensile and creep-rupture properties at temperatures up to 1300°F. The sluggish age-hardening response of alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. This alloy has excellent weldability when

Brand Name:DLX

Model Number:Inconel 718 bar

Place of Origin:China Jiangsu

Inconel Series Inconel Alloy 718 is a precipitation hardenable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F. The sluggish age-hardening response of alloy 718 permits ...

Brand Name:ShiTan

Model Number:T51

Place of Origin:China

...Rod For Core /Water Drilling Characteristics Adopt high-end friction welding technology, the steel of the friction drill pipe body and joints is made of high-quality materials, while strictly controlling the metallurgical process, increasing the hardenability...

Place of Origin:Jiangsu, China

ER310 Stainless Steel Welding Wire ER310 Stainless Steel Welding Wire is also known as H12Cr26Ni21Si.The melting gold contains 25Cr-20Ni. it is mostly used in the welding ratio KMS of 310S stainless steel. 309 is more suitable for dissimilar metal welding...

Brand Name:Sewaly Metal

Model Number:409 410 430

Place of Origin:China

... and resistance welding methods. Type 410 filler rod should be used for weldments that will be annealed or hardened and tempered after welding. Type 309 or 310 filler rod should be used to obtain maximum weld metal ductility in the as-welded condition. ...

Brand Name:EDEST STEEL

Model Number:4130

Place of Origin:China

... good, and it has sufficient high-temperature strength below 500°C, but at 550°C Its strength drops significantly; when the alloying elements are at the lower limit, the welding is quite good, but when it is close to the upper limit, the weldability is