powder injection room electromagnetic pulse valve

Brand Name:Astar

Model Number:DN20-DN80

Place of Origin:Cangzhou, China

... air enters the rear air chamber through the throttle orifice. at this time, the pressure of the rear air chamber will be close to the output of the diaphragm valve, and the pulse solenoid valve is in a "closed" state. The

Brand Name:OEM

Model Number:VP40

Place of Origin:China

Electromagnetic Pulse Valve HUANENG Type 1 1/2'' Diaphragm Working Temperature -20~230℃ The membrane has excellent fuel resistance and ethanol gasoline resistance. Electromagnetic pulse valve dividends before and after the two air Chambers, when through the tightening air saving hole into the room the day after tomorrow, dust removal accessories at this time after the air chamber pressure diaphragm close to the valve outlet, electromagnetic pulse

Brand Name:BFEC

Model Number:DMF-Z-25

Place of Origin:China

... instruments. It functions as a switch by providing a pulse output signal that controls the injection of dust out of a single row or room of filter bags. The valve’s main role is to regulate the resistance of the filter and ensure that it stays within

Brand Name:BFEC

Model Number:DMF-Y-76S

Place of Origin:China

... 3. High cycle life 4. Fast opening/closing 5. Port size: DN80 6. Voltage:DC24V AC220V Electromagnetic pulse valve coil is higher than the national standard grade insulation injection in the protection class is IP65 full filling, full copper enameled wire,

Brand Name:Hongum

Model Number:Customized

Place of Origin:China

... (also known as diaphragm valve) is the compressed air "switch" of the pulse bag dust removal and ash injection system. Because it is controlled by the output signal set by the pulse controller, the filter bag is blown and cleaned row by row (chamber). ,

Brand Name:CTGRAIN

Model Number:TBLM

Place of Origin:Henan Zhengzhou

... unit, and the electromagnetic pulse valve is used to open and close the dust collector of the bag cleaning operation with compressed air injection. It is used to deal with fine particles such as dust in the air. Widely used in food, grain, feed, and other