pre hardened hrc28 32 hot work tool steel

Brand Name:misung steel

Model Number:1.2343 1.2344 H13 SKD61

Place of Origin:China

Product Description: FORGED DIE MOLD STEEL H13 is a high-quality hot work tool steel that is widely used for aluminum mold production. This steel is available in two types, ESR (Electroslag Remelted) or EAF (Electric Arc Furnace), allowing for flexibility...

Brand Name:Dongbei Special Steel

Model Number:AISI8620 DIN1.6523 GB20CrNiMo

Place of Origin:China

...A50202. The steel round bar is high hardenability, without fragility after tempering,good weldability.Nice machinability and Cold strain plasticity. Features 1. 1 Good machinability performance 2. 2. Good Cold ...

Brand Name:Guangda

Model Number:1.2714 Tool And Die Steel

Place of Origin:China

...Tool Steel DIN1.2714 Hot Work Tool Steel Forged Round Bar 1.2714 Tool And Die Steel for hot pressing , Moulds , mandrels , embossing tools 1.2714 Due to its characteristics of high wear resistance, extra toughness, and high hardness which is made with CR-Ni-MO-V high gradient alloys. Equivalent grades DB6 / L6 / SKT4 are commonly used as pre-hardening...

Brand Name:HNJBL

Model Number:H13

Place of Origin:China

H11 1.2343 4Cr5Mosiv Hot Work Die Mold Steel Plate Description (5) The advantage of repair welding is that the preheating and post-heating temperatures are lower than those of SKD11, so repair welding is easier. Features: General cold-work dies steel, high...

Brand Name:PANGANGGROUP,TISCO,ANSTEEL,BAOSTEEL

Model Number:X30WCrV9-3, W-Nr 1.2581, AISI H21, UNS T20821, JIS SKD5, NF Z30WCV9, BS BH21

Place of Origin:China

...Tool Steel Product Information X30WCrV9-3 W-Nr 1.2581 hot work tool steel has similar properties to high speed tool steel. The main alloying elements in tungsten hot work tool steels include tungsten, chromium, carbon and vanadium. They are less deformable when air hardened and have a higher hardening temperature than chromium hot work tool steels. If it is preheated to working...

Brand Name:UST

Model Number:DIA16-500mm

Place of Origin:China

...hot work tool steel round bar Application: 1,Hot extrusion mandrel and mould. 2,Aluminum, zinc and other light metal die-casting mold. 3,Tools of structural steel hot forging and heat-resistant steel. 4,High-speed hammer forging die. Smiliar Grade:4Cr5MoVSi/SKD6/H11/1.2343/X38CrMoV5/BH11 Chemical composition: C S Mn Cr W V P S 0.32...

Place of Origin:Jiangsu China

Brand Name:JIANGSU TISCO

High Carbon Low Alloy Cold Work Die Steel Sheet/Plate Cold work die steel is usually mainly composed of high carbon to meet the needs of high hardness and high wear resistance. If in order to improve the impact resistance of the mold, when the toughness ...

Brand Name:Zhanlu

Model Number:H13

Place of Origin:China

H13 Die Steel Bar 6.0mm-500mm DIN/EN X40CrMoV5-1 ASTM A681-2008 H13 is widely used for aluminum and zinc casting dies, as well as for aluminum extrusion, aluminum die casting and press tooling. This grade is ideal for a range of hot work and cold work ...

Brand Name:VANFORGE

Place of Origin:China

330HBW hardened tool and engineering steel round bar Description Pre-hardened, precise, predictable steel, now in round bars 330HBW tool steel round bars are pre-hardened, ready-to-use quenched and tempered tool steels that come in a wide range of ...

Brand Name:Joeben

Model Number:PMCT28

Place of Origin:ShenZhen

...steel, hot-work tool steel, high-hard steel, bearing steel, hardened steel, powder smelting steel, powder smelting metal, martensitic stainless steel, high-strength steel, High manganese steel, white cast iron, austenitic soft iron, etc. Soft materials and

Brand Name:BEST

Model Number:1/2''-48''

Place of Origin:China/Japan

It is used for the production of simple hand tools such as axes, hatchets, hammers and ordinary blacksmith, anvil, blacksmith tools support, files, knives, dies, markers, engraving tool, drag rings, punches punching knives, leather and paper. Technical ...

Brand Name:Bozhong

Model Number:1.2726 / DIN 26NiCrMoV5

Place of Origin:China

...working tool steel. Applications Hot working steel, pilger mandrels ø 140 -200 mm, crack resistant for hot work. Physical properties (avarage values) at ambient temperature Modulus of elasticity [103 x N/mm2]: 210 Density [g/cm3]: 7.80 Soft Annealing Heat to 670-700oC, cool slowly. Hardening Harden from a temperature of 840-870oC followed by oil quenching. Tempering Tempering temperature: 400-600oC. Forging Hot

Brand Name:IRUNT

Model Number:Flat Steel Bars

Place of Origin:CHINA

...Hot Work Alloy Tool Mould Flat Steel Bar Product Overviews: Steel products round Diameter 16mm - 1200mm plate/flat /block Thickness 6mm-800mm Width 20mm-1500mm Heat treatment Normalized ; Annealed ; Quenched and Tempered, pre-hardened Surface Condition Black/ Peeled/ Polished/Machined /Grinded/Turned, Bright surface Delivery Condition hot rolled ; hot...

Brand Name:ZZDM

Model Number:TCN260

Place of Origin:China

...Tools Blank,Carbide Backed PCBN, φ56mm Applications PCBN is mainly used for the machining of high hardness and hard processed ferrous materials. ۞ Machining of hardened steels and high hardness metallic materials ۞ High-speed machining of grey and hard cast iron, high-strength cast iron, cold and hot-work tool steels...

Brand Name:Bao Steel

Model Number:4Cr13

Place of Origin:China

... surface 3.Hardness: ≤229HBS or 32~36HRC 4. Hot rolled technology:EAF+LF+VD Forged technology: EAF+LF+VD+ESR+Forging +Q T + Machined surface 5.hot treatment quench:1020-1050°C, oil cooling or quenching liquid colling, hardness HRC≥45 backfire:

Place of Origin:CHNIA

Brand Name:Zhengde

Thickness 0.3-3.0mm 201/304/430/316 No. 4 2b 8K Cold Rolling Stainless Steel Coil Wholesale Price ISO C Product Description Product Description Zhengde Cold rolled steel coil is made from hot-rolled steel coil as raw material, which is subjected to acid ...

Brand Name:HANYU

Model Number:SKJL-2

Place of Origin:China

...Tools TYSKJL-2 Hot Forged Steel Self Gripping Clamps General Clamp TYSKJL Self Gripping Clamps The self-gripping clamps can be use to anchor and to string rope. The body is made of high strength hot forged steel in order to minimize the ratio between weight and working load. Model Rated load(kn) Apply range(mm) Weight(kg) Remark SKJL-2 20 Φ4-22 1.3 Steel cable; conductor SKJL-3 30 Φ16-32 2.5 Copper wire; Aluminum steel...

Brand Name:AMG

Place of Origin:CHINA

... steels like P20 (HRC 28-32) and other tough materials up to HRC55 hardness. Its square-end geometry ensures efficient material removal with excellent precision and surface finish. ...

Brand Name:OEM/ODM

Model Number:HW-290

Place of Origin:China

...tool making Mould Information: Hardness of Cavity & Core Pre-Hardness Steel: HRC 32 ~ 36, Heat Treatment Steel: HRC 48~50° Runner hot runner or cold runner Mould life 300,000-2,000,000 shots Processing methods forgings, CNC milling and turning, grinding, casting, broaching, etc Design software NX-UG, Pro/E, Moldflow, Auto CAD Hardness of steel...