rebar short stress line rolling mill

Brand Name:Yushun

Model Number:Customized

Place of Origin:Jiangsu, China

...Short Stress Path Rolling Mill for Bar/Rebar Production Line Short stress line mill, also known as non arch mill, is a kind of high stiffness mill. When used as a section mill, it should not only have high radial stiffness, but also have high axial stiffness.At present, many types of short stress line mills have been developed in China, such as :GY,HB,CW,SY,GW,DW, etc., among which there are three representative ones. They are GY short stress

Brand Name:DIAOZHUO

Model Number:DZ-YL14 DZ-YL-11 DZ-YL-4

Place of Origin:HEBEI, CHINA

..., there have three rotary wheels inside, we could adjust it up and down, it is easier for the raw materials installation, we could put the wire rod inside, then adjust the wheels. 2. Rolling mill The rollers’ angle should be 120°, at the same center,

Brand Name:DIAOZHUO

Model Number:DZ-YL14 DZ-YL-11 DZ-YL-4

Place of Origin:HEBEI, CHINA

..., there have three rotary wheels inside, we could adjust it up and down, it is easier for the raw materials installation, we could put the wire rod inside, then adjust the wheels. 2. Rolling mill The rollers’ angle should be 120°, at the same center,

Place of Origin:Shaanxi, China

Brand Name:AE

...Rolling Mill Hot Rolling Mill Weight 60000-100000 t/y Steel Bar Rebar Production Line Rolling Mill Rolling Mills Machine CCM 1. 1-5t/hour steel bar production line, final bar size range is 8-32 mm,most use for build for small rolling mill.we have half-automatic/fully automatic steel bar production line...

Brand Name:SEEC

Model Number:Rolling mill

Place of Origin:China

Rolling Mill Stand slab mill rebar mill wire rod mill plate mill Medium plate hot rolling line Steel grade: Carbon steel, Alloy steel Thickness: 6-45mm Width : 1200~2600mm Length: Max 18000mm Unit plate: 4.6 ton Max. Screw-down has the electrical APC； The precision of the rolling control depend on hydraulic AGC； The mill has the section cooling of the roll, high pressure water descaling and the dust cleaning. It has the roll gap meter and rolling

Place of Origin:China

Brand Name:JIN GE CHAO TONG

Cold Rolling Machine Introduction: Cold rolling machine, also known as rolling mill, reinforcing bar reducing mill, rebar scoring machine, round steel gin, etc., has a simple design. As long as the pressure difference is appropriate, the cold-rolled ...

Brand Name:Jinye

Model Number:0.2-2.0 x 1000

Place of Origin:Wuxi, China

...Rolling Mill Line for Steel Coil Stainless Steel Coil Introduction Tension Leveler( stretching bending straightening machine) can simultaneously form longitudinal and transverse deformation of thin plates, thereby fully improving the flatness and material properties of thin plates, greatly enhancing the technology of thin plate straightening. Due to the bending stress...

Brand Name:KBN

Model Number:KBN-42

Place of Origin:Henan

Resin Woven Asbestos Brake Lining Roll Wire Backed Brake Friction Roll Lining Width: ≤600mm Thickness: 4-35mm Length: 3m, 5m, 8m, 10m, 15m, 20m, etc Brake Lining Roll is made of woven material with brass wire, resin glass fiber, and viscose fiber, is ...

Place of Origin:Jiangsu Wuxi China (mainland)

Brand Name:Haijun

Model Number:Deformed bar rolling equipment

... Two Process With 150 × 150 × 3000mm continuous casting billet production Φ8-Φ32mm twisted steel in the production process on a semi-continuous rolling method, the export line speed to be as large as 14m / s; Rolling need to cut with

Brand Name:RINO

Model Number:HH-M1800

Place of Origin:China

...: Φ400mm ◆ Single side maximum load: maximum 2000Kg ◆ Power motor parameters: ① Paper clip motor 550W×4 380V 50HZ short-time (S2) working system ② Lifting motor 1.5KW 380V 50HZ short-time (S2) working system

Brand Name:ZHONGYUE

Model Number:ZY80 DFT

Place of Origin:ZHANGJIAGANG,CHINA

...Mill high-frequency welded tube mill line is designed to produce Square and Rectangular tubes with size of □40×40 – □80×80mm, tube's wall thickness of 1.6mm–4.0mm. Directly Forming to Square or Rectangular Tube: The Linear cage forming for square and rectangular tubes, can carry out the forming change operation in a very short time and without any replacement of rolls. Advantage of the line...

Brand Name:Tian Gong

Place of Origin:Changzhou, China

... casting lines, hot rolling mills, and other steel processing equipment. Manufactured using high-strength alloy and carbon steels, each shaft is precision-forged to ensure superior ...

Brand Name:FLE

Model Number:1300# 2500#

Place of Origin:China

Automatic LVT Floor Coating Production Line with SPC/WPC/UV Coating LVT automatic production line includes automatic feeding machine, UV coating line, LVT annealing line (annealing line is to eliminate the stress of LVT floor, to prevent the deformation...

Brand Name:SENDA

Model Number:SD0011

Place of Origin:China

hot rolling H13K Billet shear knives for cut to length lines Senda Billet shear knives and blades are manufactured to operate cutting and shearing operation at high temperatures. Shears with parallel blades are used in slabbing lines, blooming lines, ...

Brand Name:SY-PACK

Place of Origin:Hebei, China

electric mill roll stand Product Features: 1- Electric mill roll stand 2- Width: 1600mm;1800mm Product Parameters: 1, Backstands action mode:mechanical electric operation 2, the range of paper jams:maximum:1600mm minimum:600mm 3, the diameter of paper jams...

Brand Name:MITTEL TISCO BAO STEEL

Model Number:C10100 C10200 C10300 C10400

Place of Origin:China

Product Description item value Product name Copper coil/strip Material C12300,C1020P,C10100,C10400,C10700,C10200,T2,C1100P,C10500,M1,Cu-ETP,TP1,C1201P,C11000,Cu-DLP,TP2,C1220P,C1221P,C1200,C12200,C14200,C23000P,H62,C2801P,C36500 Thickness 0.1-20mm Width ...

Brand Name:YIKE GROUP

Model Number:YK-1400

Place of Origin:China

YIKE GROUP Semi Auto Single Facer Corrugation Machine For 2 Ply Corrugated Sheets Specification ZJ-F shaftless mill roll stand Technical parameters: 1,Backstands action mode:mechanical electric operation 2,the range of paper jams:maximum:1600mm minimum:...

Brand Name:Shcommon

Model Number:MV-AL-Sheet

Place of Origin:Shanghai,China

... quality,continuous casting and rolling, to enhance production capacity to 450,000 tons. 1+1 HOT MILL Solid-melting furnace using natural gas heating, with a uniform temperature, fast heating, into the water short time, can be different thickness, width of

Brand Name:TENG TIAN

Model Number:1200*16MM

Place of Origin:CHINA

... existing tube mill Entry line Accumulator Forming stands Squeeze roll Flying Cutoff Online facing & chamfering Customers count on our machine for the following advantages High productivity and availability Reliable reproducibility Short set-up times ...