resin melt flow testing machine

Brand Name:AISRY

Model Number:ASR-5605

Place of Origin:China

Melt Flow Index Tester Melt Flow Testing Machine Application: It can be used for the determination of melt flow rate and melt density of various plastics such as polyethylene,polypropylene,polystyrene,ABS resin,fiber resin,acrylicester polycarbonate and ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803

...Testing Machines ASTM-D1238 Melt Flow Testing Machine Specifications Melt Flow testing 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factory Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Melt Flow Index Machine , Point Load Melt Flow Index Tester Equipment Gold Brand Melt Flow Index Tester Uses: This machine applies to both molten high temperature of the PE, gather fang PSF, fluorine plastic, nylon engineering plastic, also suitable for polyethylene, polypropylene polystyrene, ABS resin, pom resins melting temperature lower plastic tests. Gold Brand Melt Flow...

Brand Name:Kejian Kinsgeo

Model Number:KJ-3092B

Place of Origin:Dongguan China

...Melt Flow Index Machine , Electronic Melt Flow Index Tester with One Year Warranty Introduction: Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ISO1133-97, ASTM1238, JIS, ect.. It is used in polyethylene, polypropylene, polystyrene, ABS, polyethylene amide, fiber resin...

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-DP

LCD Touch Screen Chinese And English Version Melt Flow Meter Melt Flow Index Tester A. Product Introduction It is used to determine the MFR & MVR value of the melt flow rate through the standard die every 10 minutes when various plastics and gums pass thr...

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

...Melt-mass flow rate, Melt-volume flow rate determinator for plastic Product Description: The melt flow rate meter works by melting the plastic sample into a heating cylinder and then pressing the melt into the tester by a quantitative mold method. The piston in the tester applies the melt pressure to the standard mouth die to flow out through the mouth die, and the mass or time of the flowing melt is measured according to the test

Brand Name:YUYANG

Model Number:YY212

Place of Origin:CHINA

... Drop Tester Melt Flammability Tester can be used for more than 5mm thickness of rigid and elastic material performance evaluation, and it is developed according to flame test standard NF P92-501. Thermal Radiation Dripping Tester for Building Materials to

Brand Name:YUYANG

Model Number:YYE099

Place of Origin:China

... pressure less than 0.6MPa. Parameters: 1. The frame is made of aluminum material, the water for flow test can be recycled to water tank; 2. Water supply: stainless steel water tank, stainless steel multi-stage pump, pipeline; 3. ...

Brand Name:BonninTech

Model Number:AMP Series

Place of Origin:Wuhan, China

BONNIN Automatic Camera Video Melting Point Apparatus Automatic Melting Point Tester FDA CFR21 AMP series Video Melting Point Apparatus, perfectly integrate video technology into melting point measuring. It not only provides users with reliable melting ...

Brand Name:SKYLINE

Model Number:SL-PL06

Place of Origin:DONGGUAN CITY

... of 1.33KPa, the air ventilation of the pen cap must reach 8L/min), which is a special testing instrument customised for pen cap air permeability testing. (i.e. under 1.33KPa pressure, the air ventilation of the pen cap must reach 8L/min), and it is a

Model Number:HW-6D

Place of Origin:China

220V Fuel Injector Analyzer & Cleaning Ultrasonic Fuel Injector Cleaning Machine Product function: Injector fuel distribution and delivery checking; leakage hunting;injector cleaning; Engine idle; middle speed, high speed working station simulation; ...

Brand Name:Zeayeto

Model Number:FIC-601

Place of Origin:China

Ultrasonic Fuel Injector Cleaning Testing Machine With Personal Design When should I maintain the injector? 1. The engine noise becomes larger, especially in the low gear position; 2. The throttle response is not sensitive, the driving is not smooth, and...

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it works:

Model Number:LR-A001-A

Brand Name:Lonroy

Place of Origin:China

...acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. 2.Standard GB/T3682-2018,ISO1133-2011, ASTM D1238 3.Product Character 1.English LCD ...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

... of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:lixian

Model Number:HZ-1706A

Place of Origin:China

..., fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. To meet the standard: The machine designed and manufactured in accordance with the

Brand Name:Delta

Model Number:MFR

Place of Origin:China

Melt Volume Flow Rate ASTM D1238 Melt Flow Rate Tester by Extrusion Plastometer Introduction: MFR ASTM D1238 Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ASTM D1238 Melt Flow Rate Tester is suitable for testing fluorine plastic, nylon and other engineering plastics, it is also used to test polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin...

Brand Name:Kinte

Model Number:WH-8991

Place of Origin:Guangdong,China (Mainland)

... control instrument, temperature accuracy and stability. Programmed setting, timing control, automatic cutting material. The melt flow rate and the melt density of various plastics such as polyethylene, polypropylene, polystyrene, polyamide, fiber resin,