rotating shaft mechanical seal 25mm

Brand Name:None

Model Number:Grundfos mechanical seal

Place of Origin:China

.../equipment • Submersible pumps • Engine pumps • Circulating pumps Quick Details Place of Origin: China Model Number: Grundfos pump seals Product name: Mechanical Seal size: 8-100mm Pressure: ≤-0.1~1.6MPa Temperature:

Brand Name:YUE MI

Model Number:FB

Place of Origin:Guangzhou, China

Rotany Ring (Ceramic/Slc) tationary Ring (Plastic Carbon/Carbon'Sic) Secondary SeaUNBR/EPDM/HNBR,WITON) spring d Othw Parts (SUs304 5U5316) DETAILS Shaft Size 12~20mm Material Face: Carbon, SiC, TC Seat: Ceramic, SiC, TC O-rings:NBR,EPDM,FKM,Aflas,FEP,...

Brand Name:Bogeman

Model Number:SPX

Place of Origin:Guangzhou, China

...Mechanical Seal 25mm SPX High Pressure Mechanical Seal SPX -45 50 60 80 Sanitary Pump Seal Mechanical Seal Basic Info. Model NO. SPX Type High Pressure Seal Balance Standard ABS Pump Seal Wave Spring Seal Pumpex Seal Wave Spring Seal Sulzer Submersible Pump Seal Single Spring Seal Mixer Seal Mechanical Seal Under Water Mixer M-150 Shaft Seal Pump Afp & Vup Pump Seal Jumbo Seal Mechanical Pump Seal Piranha Seal...

Brand Name:JG

Model Number:MG1

Place of Origin:Zhejiang, China

...Mechanical Seal For Water Pump ISO9001:2008 MG1 Product Description: Features: • For plain shafts • Single and dual seal • Elastomer bellows rotating • Unbalanced • Independent of direction of rotation • No torsion on bellows Advantages: • Shaft protection over the entire seal length • Protection of the seal face during installation due to special bellows design • Insensitive to shaft...

Brand Name:JR

Model Number:GEA

Place of Origin:MADE IN CHINA

...Mechanical Seal 25MM 30MM For Sanitary Pumps Gea Pump Operational Conditions: Mechanical seals for sanitary pumps Axial diameter:25mm 30mm SIC/SIC/V /316L SIC/SIC/EPDM/316L Replace original import Temperature: -20ºC to +180ºC Pressure: ≤2.5MPa Speed: ≤15m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal...

Brand Name:TAKUMI

Model Number:MG1-25

Place of Origin:China

MG1 series mechanical seal for water pumps Detailed Images MG1 series mechanical seal for water pumps Design Features - Single face, single spring, unbalanced, rubber bellows structure. - The seal face is driven through the spring, and spring seat, good ...

Brand Name:CCO

Model Number:Different Types

Place of Origin:China

Multiple Models Oil Seal Car Power Steering National Oil Seal Nbr Fkm Skeleton Seals Wide range of applications 1. Automobile manufacturing field 2. Industrial Machinery 3. Aerospace field 4. Shipbuilding field How to determine whether the oil seal needs...

Place of Origin:Qingdao, China

... Shaft Seals are used between rotating and nonrotating machine components, to prevent oil leakage. With the development of mechanics, in order to prevent water or chemical liquid and dust and soil, except for oil, to enter inner, oil seal is used in these

Brand Name:KALU

Model Number:KL-V97

Place of Origin:China

.... The Type 97 drives from the shaft, via the drive collar with grub screws, inserted in the spring coil tail. Available as standard with an anti-rotational Type 95 stationary and with either a monolithic stainless steel head or with inserted carbide faces.

Place of Origin:China

Brand Name:TLANMP

Model Number:112-18

...Mechanical Seals For Shaft Size 18mm Pumps used in oil and sewage With G9 Seat (Material:TC/TC) Series Mechanical Seals 112 Model Number 112-18mm Shaft Size 18mm Introduction 112 Mechanical seal adopts crotch mechanism to achieve rellable drive.The secondary seal can use "O"ring "V"ring.It is often used for oil,waste water,chemicals and other weak corrosive medium. Single seal Unbalanced Independent of direction of rotation

Brand Name:SUNCAR

Model Number:A4VG125 Main pump seal kit

Place of Origin:CN

... pump. About the fluid sealing, it usually uses the mechanical seal to contain the fluid within a vessel (typically pumps, mixers, etc.) where a rotating shaft passes through a stationary housing or occasionally, where the housing rotates around the shaft.

Brand Name:CSQ

Place of Origin:China

...at least a pair of end face perpendicular to the rotation axis, and under the force of fluid pressure and compensation institution elastic force (stone force) and with the cooperation of the auxiliary seal, the faces keep seat and the relativ sliding, to

Brand Name:ZOZHI

Model Number:CN K1

Place of Origin:FUAN

..., and compressors. Because the transmission shaft passes through the inside and outside of the device, the peripheral gap between the shaft and the device, the device leaking the medium passes through the gap. If the internal pressure of the device is

Brand Name:VKD

Place of Origin:zhuzhou

... housing in equipment .Tungsten carbide is the most excellent seal face material in the seal material world. 2. The cemented carbide seal ring can be divided into both of the rotating seal ring and static seal ring, and constitutes mechanic seal together

Brand Name:XYMJ

Model Number:Customized

Place of Origin:China

Centrifugal Pump Mechanical Seal Tungsten Carbide Rings Mechanical seal ring are used to seal the clearance between the rotating shaft and the stationary housing in equipment . Tungsten carbide is the most excellent seal face material in the seal material ...

Brand Name:N&D

Model Number:Inlaid Carbide Seal-ring/Bearing

Place of Origin:Guanghan

...shape, O-shape, U- type,face seal rings and per clients requests. Tungsten Carbide Mechanical Seal Rotating shafts of bead mill and other machines require sealing systems to separate pressurized fluids, minimize the entry of debris into the working medium,

Brand Name:KALUSEAL

Model Number:KL-Tri

Place of Origin:Zhangjiagang,China

Tri-Clover Pump Mechanical Seal With Stationary Shaft Size 0.75",1.125" ,1.5" Tri-Clover pump mechanical seal replacement Shaft size 0.75",1.125" ,1.5" Rotary Ring (Carbon/SiC/TC) Stationary Ring (SiC/TC) Secondary SeaI(VITON) Spring & Other Parts(SUS304/...

Brand Name:WEIYE

Model Number:Customized

Place of Origin:Zhuzhou, Hunan，China（mainland）

...MECHANICAL SEAL RINGS With Countersink Positioning Hole YG6 YG8 SEAL RINGS Tungsten Carbide Seal Ring Description: Mechanical seal rings are used to seal the clearance between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot leak out through this clearance. Tungsten carbide is the most excellent seal face material in the seal...

Brand Name:Lanqing

Model Number:oem

Place of Origin:Hebei

shaft seal sealol 606 609 604 mechanical seals 1. WY609 equals to John crane metal bellow seal 609 2. Our seals can replace the original seals. 3.Application: seals are primarily used in in Clean water,sewage water,oil ,Sulfuric acid,hydrocarbon acid,...