sae 6b shaft lsht hydraulic motor

Brand Name:HANJIU

Model Number:BMER

Place of Origin:China

LSHT Hydraulic Motor. 6 Bolt Magneto Mount; 18.08 Cu In. SAE 6B Shaft high torque motor SPECIFICATIONS Model BMER2-300-MS-RW-S Disp. 18.08 cu.in./rev. Pressure 2970 PSI (Cont.) 3480 PSI (Int.) Torque 7169 in-lb. (Cont.) 8231 in-lb. (Int.) Speed 250 RPM (Cont.) 315 RPM (Int.) Flow 19.8 GPM (Cont.) 25 GPM (Int.) Rotation Reversible Mount :Magneto mounting Shaft :SAE 6B SHAFT...

Brand Name:REIJAY

Model Number:RB

Place of Origin:China

High transmission accuracy Long maintenance intervals Sae Flywheel Coupling for engine and pump drive trains The allowable speed range of the coupling is determined by calculation according to the allowable linear speed and the maximum outer edge size of ...

Brand Name:Hanjiu

Model Number:BMER

Place of Origin:China

..., the BMER ( TG Series ) low speed high torque (LSHT) hydraulic motor is available in 4 bolt, 6 bolt flange or wheel mounts. Torques to 12,600 lb-in and displacements to 58.5 cu in. Shaft sizes to 1.375-inch nominal This motor with same mounting and

Brand Name:KERSTERN

Model Number:BM3-250

Place of Origin:CHINA

Low / Variable Speeds Hydraulic Drive Motor Displacement 250cc High Torque ISO9001 Low-speed/high-torque (LSHT) motors are one of the more cost-effective and dependable parts of a hydraulic system. They offer a designer many advantages over a system ...

Brand Name:ZOZHI

Model Number:Hydraulic Pressure Pumps Motor

Place of Origin:China

...Shaft Hydraulic Pressure Pumps Hollow Shaft Motor Description It is exciting to announce the introduction of our new Hollow Shaft Hydraulic Pump Motors. These motors are designed with highly engineered adapter pads allowing the motor flange to mount to SAE A, B, and C flanges for both 2 and 4 bolt configurations. The motor shafts will have a standard SAE shaft...

Brand Name:Parker/Denison

Model Number:M4C-024-1N00-A101 M4C-031-1N01-A101 M4C-043-2N02-A104 M4C-075-3N00-A101 M4C1-043-3N01-A102 M4D-088-1N00-B104 M4DC-113-075-1N00-B104 M4SC-043-3N02-A501 M4SD-074-1N00-B502 M4SE-214-3N00-B504 M4SD1-088-1N00-B502

Place of Origin:USA/FRANCE

... l/min Theoretical Torque: 1.270 Nm/bar Direction of Rotation: Bi-rotational Type of Shaft: splined (SAE B) 13T Seal Class: Buna N Net weight: 15.4 kg Country of Origin: France Denison M4 Vane Motor Ordering Code: SAAR specialized in pumps, motors,

Brand Name:UST

Model Number:OD up to 8,000mm; ID up to 7,800mm; Thickness up to 500mm

Place of Origin:CHINA

AISI 1020/S20C professional high-quality forged steel rings Category Steel Class Carbon steel Type Standard Designations France: AFNOR CC 20 Germany: DIN 1.0402 Italy: UNI C 20 Sweden: SS 1450 United Kingdom: B.S. 040 A 20 , B.S. 070 M 20 United States...

Brand Name:SERVA

Model Number:SCP RA 3x2x11 Centrifugal Pump

Place of Origin:China

... pressure. Major Featuers: 1. Designed to meet SAE “B” hydraulic motor input size; 2. The hydraulic motor is connected to through splines, to significantly eliminate an alignment error; 3. This pump can come with single keyed shaft for mounting; 4.

Brand Name:KE HAO

Model Number:JHP Single Pump Square cover Flat key Blue

Place of Origin:CHINA

...Hydraulic Gear Pump for Loader or Excavtor Hydraulic Pump Features: 1. The range of gear pumps and motors is available in 4 basic frame sizes for flows up to 108lpm and pressure up to 250bar (3500psi) single and multiple units are offered having a variety of shaft, flange and connection options, which fit SAE...